EN 60393-6:2016

Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers

IEC 60393-6:2015 applies to surface mount preset potentiometers for use in electronic equipment. This part of IEC 60393 prescribes preferred ratings and characteristics and selects from IEC 60393-1, the appropriate quality assessment procedures, tests and measuring methods, and it gives general performance requirements for this type of potentiometers. This standard gives the minimum performance requirements and test severities. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the information on the assessment level EZ (zero nonconforming); b) complete editorial revision.

Potentiometer zur Verwendung in Geräten der Elektronik - Teil 6: Rahmenspezifikation - Trimmpotentiometer für die Oberflächenmontage

Potentiomètres utilises dans les équipements électroniques - Partie 6 : Spécification intermédiaire - Potentiomètres d'ajustement pour montage en surface

L'IEC 60393-6:2015 s'applique aux potentiomètres d'ajustement pour montage en surface utilisés dans les équipements électroniques. La présente partie de l'IEC 60393 prescrit des valeurs assignées et des caractéristiques préférentielles et sélectionne dans l'IEC 60393-1 les procédures d'assurance de la qualité, les essais et les méthodes de mesure appropriés et elle donne les exigences de performances générales pour ce type de potentiomètres. La présente norme donne les exigences de performances et les sévérités d'essais minimales. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Révision des informations sur les niveaux d'assurance EZ (zéro non-conformité); b) Révision éditoriale complète.

Potenciometri za elektronsko opremo - 6. del: Področna specifikacija - Prednastavljeni potenciometri za površinsko montažo

Ta del standarda IEC 60393 se uporablja za prednastavljene potenciometre za površinsko montažo, ki se uporabljajo pri elektronski opremi.
Ta del standarda IEC 60393 predpisuje prednostne vrednosti in lastnosti, izbira primerne postopke za ovrednotenje kakovosti, preskuse in merilne metode iz standarda IEC 60393-1 ter podaja splošne zahteve glede zmogljivosti za ta tip potenciometra.
Ta standard podaja minimalne zahteve glede zmogljivosti in preskusne stopnje.

General Information

• Status: Published
• Publication Date: 07-Apr-2016
• Withdrawal Date: 17-Jan-2019
• ICS: 31.040.20 - Potentiometers, variable resistors
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Apr-2016
• Completion Date: 08-Apr-2016
• Ref Project: SIST EN 60393-6:2016 - Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60393-6:2016
01-julij-2016
3RWHQFLRPHWUL]DHOHNWURQVNRRSUHPRGHO3RGURþQDVSHFLILNDFLMD
3UHGQDVWDYOMHQLSRWHQFLRPHWUL]DSRYUãLQVNRPRQWDåR
Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface
mount preset potentiometers
Potentiomètres utilises dans les équipements électroniques - Partie 6 : Spécification
intermédiaire - Potentiomètres d'ajustement pour montage en surface
Ta slovenski standard je istoveten z: EN 60393-6:2016
ICS:
31.040.20 Potenciometri, spremenljivi Potentiometers, variable
upori resistors
SIST EN 60393-6:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60393-6:2016

---------------------- Page: 2 ----------------------

SIST EN 60393-6:2016


EUROPEAN STANDARD EN 60393-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2016
ICS 31.040.20

English Version
Potentiometers for use in electronic equipment - Part 6:
Sectional specification - Surface mount preset potentiometers
(IEC 60393-6:2015)
Potentiomètres utilises dans les équipements électroniques Potentiometer zur Verwendung in Geräten der Elektronik -
- Partie 6 : Spécification intermédiaire - Potentiomètres Teil 6: Rahmenspezifikation - Trimmpotentiometer für die
d'ajustement pour montage en surface Oberflächenmontage
(IEC 60393-6:2015) (IEC 60393-6:2015)
This European Standard was approved by CENELEC on 2016-01-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60393-6:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60393-6:2016
EN 60393-6:2016
European foreword
The text of document 40/2409/FDIS, future edition 2 of IEC 60393-6, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60393-6:2016.
The following dates are fixed:
(dop) 2016-10-18
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-01-18
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60393-6:2015 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 60393-6:2016
EN 60393-6:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60062 -  Marking codes for resistors and capacitors EN 60062 -
IEC 60068-1 2013 Envir
...