EN 60915:2007

Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

IEC 60915:2006 contains preferred dimensions for shaft ends and bushes and for the mounting of single-hole, bush-mounted, shaft-operated variable capacitors, variable resistors and potentiometers. If other dimensions not listed in this standard have to be used, it is recommended to select them also from IEC 60390 and IEC 60620. This second edition cancels and replaces the first edition published in 1987 and constitutes a minor revision, related to tables, figures and references. This bilingual version, published in 2008-07, corresponds to the English version. The contents of the corrigendum of December 2008 have been included in this copy.

Widerstände und Kondensatoren zur Verwendung in Geräten der Elektronik - Vorzugsmaße für Wellenenden, Buchsen und für die Einloch-Buchsenmontage von wellenbetätigten elektronischen Bauelementen

Condensateurs et résistances utilisés dans les équipements électroniques - Dimensions préférentielles concernant les terminaisons des axes, les canons et le montage par le canon sur trou unique des composants électroniques munis d'un axe de commande

La CEI 60915:2006 contient les dimensions préférentielles concernant les terminaisons des axes, les canons et le montage par le canon sur trou unique de condensateurs variables, de résistances et de potentiomètres variables munis d'un axe de commande. Si d'autres dimensions non indiquées dans la présente norme doivent être utilisées, il est recommandé de les sélectionner aussi dans les normes CEI 60390 et la CEI 60620. Cette seconde édition annule et remplace la première édition publiée en 1987. Elle constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue, publiée en 2008-07, correspond à la version anglaise. Le contenu du corrigendum de décembre 2008 a été pris en considération dans cet exemplaire.

Fiksni kondenzatorji in upori za uporabo v elektronski opremi - Priporočene mere za konce (valjastih) teles, izvrtine in montažo valjastih elektronskih komponent z eno odprtino skozi izvrtino (IEC 60915:2006 (EQV) + popravek maj 2007)

General Information

• Status: Published
• Publication Date: 27-Sep-2007
• Withdrawal Date: 31-Aug-2010
• ICS: 31.040 - Resistors
• ICS: 31.060 - Capacitors
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 28-Sep-2007
• Ref Project: SIST EN 60915:2008 - Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60915:2008
01-januar-2008
)LNVQLNRQGHQ]DWRUMLLQXSRUL]DXSRUDERYHOHNWURQVNLRSUHPL3ULSRURþHQHPHUH
]DNRQFHYDOMDVWLKWHOHVL]YUWLQHLQPRQWDåRYDOMDVWLKHOHNWURQVNLKNRPSRQHQW]
HQRRGSUWLQRVNR]LL]YUWLQR,(&(49SRSUDYHNPDM
Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of
shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated
electronic components
Festkondensatoren und Widerstände zur Verwendung in Geräten der Elektronik -
Vorzugsmaße für Wellenenden, Buchsen und für die Einloch-Buchsenmontage von
wellenbetätigten elektronischen Bauelementen
Résistances et condensateurs fixes utilisés dans les équipements électroniques -
Dimensions préférentielles concernant les terminaisons des axes, les canons et le
montage par le canon sur trou unique des composants électroniques munis d'un axe de
commande
Ta slovenski standard je istoveten z: EN 60915:2007
ICS:
31.040.10 Fiksni upor Fixed resistors
31.060.10 Fiksni kondenzatorji Fixed capacitors
SIST EN 60915:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60915:2008

---------------------- Page: 2 ----------------------

SIST EN 60915:2008


EUROPEAN STANDARD
EN 60915

NORME EUROPÉENNE
September 2007
EUROPÄISCHE NORM

ICS 31.040; 31.060


English version


Fixed capacitors and resistors for use in electronic equipment -
Preferred dimensions of shaft ends, bushes and for the mounting
of single-hole, bush-mounted, shaft-operated electronic components
(IEC 60915:2006 + corrigendum 2007)


Résistances et condensateurs fixes Festkondensatoren und Widerstände zur
utilisés dans les équipements Verwendung in Geräten der Elektronik -
électroniques - Vorzugsmaße für Wellenenden, Buchsen
Dimensions préférentielles concernant und für die Einloch-Buchsenmontage
les terminaisons des axes, les canons von wellenbetätigten elektronischen
et le montage par le canon sur trou unique Bauelementen
des composants électroniques munis (IEC 60915:2006 + Corrigendum 2007)
d'un axe de commande
(CEI 60915:2006 + corrigendum 2007)



This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60915:2007 E

---------------------- Page: 3 ----------------------

SIST EN 60915:2008
EN 60915:2007 - 2 -
Foreword
The text of document 40/1654/CDV, future edition 2 of IEC 60915, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60915 on 2007-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60915:2006 + corrigendum May 2007 was approved by
CENELEC as a European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60915:2008
- 3 - EN 60915:2007

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the
...