Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz

This part of EN 50117 which is a sectional specification applies to coaxial outdoor drop cables for analogue and digital one and two way signal transmission, e.g. for cable networks for television signals, sound signals and interactive services in accordance with EN 60728-1, EN 60728-1-1, EN 60728-101, EN 60728-10, EN 50173-1 and EN 50173-4. This includes also the transmission of BCT signals provided by a CATV, MATV or SMATV cable network. The purpose of this European Standard is to specify the applicable test methods and requirements for the electrical, mechanical and environmental characteristics and for fire performance of the cables.

Koaxialkabel - Teil 10-2: Rahmenspezifikation für Koaxialkabel für analoge und digitale Signalübertragung – Außenkabel für Systeme im Bereich von 5 MHz - 3 000 MHz

Dieser Teil von EN 50117, der eine Rahmenspezifikation ist, gilt für Außenkabel für analoge und digitale Einweg- und Zweiweg-Signalübertragung, z. B. für Kabelnetzwerke für Fernsehsignale, Tonsignale und interaktive Dienste in Übereinstimmung mit EN 60728-1, EN 60728-1-1, EN 60728-101, EN 60728-10, EN 50173-1 und EN 50173-4. Dies schließt auch die Übertragung von RuK-Signalen ein, die durch GGA-, GA- oder SAT-GA-Kabelnetze bereitgestellt werden. Zweck dieser Europäischen Norm ist es, die zutreffenden Prüfverfahren und Anforderungen der elektrischen und mechanischen Eigenschaften der Kabel sowie das Verhalten der Kabel gegenüber Umgebungsbedingungen und das Brandverhalten festzulegen.

Câbles coaxiaux - Partie 10-2: Spécification intermédiaire pour câbles coaxiaux pour la transmission de signaux analogiques et numériques - Câbles de raccordement à usage extérieur pour les systèmes fonctionnant entre 5 MHz et 3 000 MHz

La présente partie de l’EN 50117 qui est une spécification intermédiaire s’applique aux câbles coaxiaux de raccordement à usage extérieur pour la transmission unidirectionnelle ou bidirectionnelle de signaux analogiques et numériques, par exemple pour les réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs, conformément aux normes EN 60728-1, EN 60728-1-1, EN 60728-101, EN 60728-10, EN 50173-1 et EN 50173-4. Cela inclut également la transmission de signaux BCT (Technologies de communication et de télédiffusion) fournis par un réseau de distribution par câble (CATV, MATV ou SMATV). La présente Norme européenne est destinée à spécifier les méthodes d’essai et les exigences applicables pour les caractéristiques électriques, mécaniques et d’environnement et pour les performances de tenue au feu des câbles.

Koaksialni kabli - 10-2. del: Področna specifikacija za koaksialne kable za analogni in digitalni prenos signala - Zunanji priključni kabli za sisteme, ki delujejo v območju od 5 MHz do 3 000 MHz

Ta evropski standard je povezan s standardom EN 50117-1 in naj bi se uporabljal skupaj s to splošno specifikacijo. Ta specifikacija se uporablja za koaksialne zunanje priključne kable za analogni in digitalni prenos signala, npr. za kabelska omrežja za televizijske signale, zvočne signale ter interaktivne storitve v skladu s skupino standardov EN 60728, EN 50173 in EN 50174.
Kabli v skladu s tem standardom so zasnovani za delovanje v temperaturnem območju od –40 °C do 70 °C in pri frekvencah med 5 MHz in 3000 MHz.
Namen tega evropskega standarda je določiti veljavne preskusne metode in zahteve za električne, mehanske, okoljske ter požarne lastnosti kablov.

General Information

Status
Published
Publication Date
28-Mar-2019
Withdrawal Date
28-Mar-2022
Current Stage
6060 - Document made available - Publishing
Start Date
29-Mar-2019
Due Date
05-Mar-2018
Completion Date
29-Mar-2019

Relations

Buy Standard

Standard
EN 50117-10-2:2019
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50117-10-2:2016
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50117-10-2:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50117-10-2:2019
01-junij-2019
Nadomešča:
SIST EN 50117-2-5:2005
SIST EN 50117-2-5:2005/A1:2008
SIST EN 50117-2-5:2005/A2:2013
SIST EN 50117-2-5:2005/AC:2012
Koaksialni kabli - 10-2. del: Področna specifikacija za koaksialne kable za analogni
in digitalni prenos signala - Zunanji priključni kabli za sisteme, ki delujejo v
območju od 5 MHz do 3 000 MHz
Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analoque and
digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000
MHz
Koaxiale Kabel - Teil 10-2: Rahmenspezifikation für koaxiale Kabel für analoge und
digitale Signalübertragung – Aussenkabe für Systeme im Bereich von 5 MHz - 3 000
MHz
Câbles coaxiaux - Partie 10-2: Spécification intermédiaire pour câbles coaxiaux pour la
transmission de signaux analogiques et numériques - Câbles de raccordement à usage
extérieur pour les systèmes fonctionnant entre 5 MHz et 3 000 MHz
Ta slovenski standard je istoveten z: EN 50117-10-2:2019
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50117-10-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50117-10-2:2019

---------------------- Page: 2 ----------------------

SIST EN 50117-10-2:2019


EUROPEAN STANDARD EN 50117-10-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2019
ICS 33.120.10 Supersedes EN 50117-2-5:2004
English Version
Coaxial cables - Part 10-2: Sectional specification for coaxial
cables for analogue and digital signal transmission - Outdoor
drop cables for systems operating at 5 MHz - 3 000 MHz
Câbles coaxiaux - Partie 10-2: Spécification intermédiaire Koaxialkabel - Teil 10-2: Rahmenspezifikation für
pour câbles coaxiaux pour la transmission de signaux Koaxialkabel für analoge und digitale Signalübertragung -
analogiques et numériques - Câbles de raccordement à Aussenkabel für Systeme im Bereich von 5 MHz - 3 000
usage extérieur pour les systèmes fonctionnant entre 5 MHz
MHz et 3 000 MHz
This European Standard was approved by CENELEC on 2018-10-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50117-10-2:2019 E

---------------------- Page: 3 ----------------------

SIST EN 50117-10-2:2019
EN 50117-10-2:2019 (E)

Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements for cable construction and design . 5
4.1 General . 5
4.2 Inner conductor . 6
4.3 Dielectric . 6
4.4 Outer conductor or screen .
...

SLOVENSKI STANDARD
oSIST prEN 50117-10-2:2016
01-januar-2016
.RDNVLDOQLNDEOLGHO3RGURþQDVSHFLILNDFLMD]DNRDNVLDOQHNDEOH]DDQDORJQL
LQGLJLWDOQLSUHQRVVLJQDOD=XQDQMLSULNOMXþQLNDEOL]DVLVWHPHNLGHOXMHMRY
REPRþMX0+]GR0+]
Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analoque and
digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000
MHz
Koaxiale Kabel - Teil 10-2: Rahmenspezifikation für koaxiale Kabel für analoge und
digitale Signalübertragung – Aussenkabe für Systeme im Bereich von 5 MHz - 3 000
MHz
Ta slovenski standard je istoveten z: prEN 50117-10-2
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
oSIST prEN 50117-10-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50117-10-2:2016

---------------------- Page: 2 ----------------------
oSIST prEN 50117-10-2:2016


EUROPEAN STANDARD DRAFT
prEN 50117-10-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2015
ICS 33.120.10 Will supersede EN 50117-2-5:2004
English Version
Coaxial cables - Part 10-2: Sectional specification for coaxial
cables for analoque and digital signal transmission - Outdoor
drop cables for systems operating at 5 MHz - 3 000 MHz
 Koaxiale Kabel - Teil 10-2: Rahmenspezifikation für
koaxiale Kabel für analoge und digitale Signalübertragung -
Aussenkabe für Systeme im Bereich von 5 MHz - 3 000
MHz
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2016-01-15.

It has been drawn up by CLC/SC 46XA.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 59949 Ref. No. prEN 50117-10-2 E

---------------------- Page: 3 ----------------------
oSIST prEN 50117-10-2:2016
prEN 50117-10-2:2015

1 Contents Page
2 European foreword . 3
3 1 Scope . 4
4 2 Normative references . 4
5 3 Terms and definitions . 5
6 4 Requirements for cable construction . 5
7 4.1 General . 5
8 4.2 Inner conductor . 5
9 4.3 Dielectric. 5
10 4.4 Outer conductor or screen .
...

SLOVENSKI STANDARD
oSIST prEN 50117-10-2:2017
01-september-2017
.RDNVLDOQLNDEOLGHO3RGURþQDVSHFLILNDFLMD]DNRDNVLDOQHNDEOH]DDQDORJQL
LQGLJLWDOQLSUHQRVVLJQDOD=XQDQMLSULNOMXþQLNDEOL]DVLVWHPHNLGHOXMHMRY
REPRþMXRG0+]GR0+]
Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analoque and
digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000
MHz
Koaxiale Kabel - Teil 10-2: Rahmenspezifikation für koaxiale Kabel für analoge und
digitale Signalübertragung – Aussenkabe für Systeme im Bereich von 5 MHz - 3 000
MHz
Ta slovenski standard je istoveten z: prEN 50117-10-2:2017
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
oSIST prEN 50117-10-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50117-10-2:2017

---------------------- Page: 2 ----------------------
oSIST prEN 50117-10-2:2017

EUROPEAN STANDARD DRAFT
prEN 50117-10-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2017
ICS 33.120.10 Will supersede EN 50117-2-5:2004
English Version
Coaxial cables - Part 10-2: Sectional specification for coaxial
cables for analogue and digital signal transmission - Outdoor
drop cables for systems operating at 5 MHz - 3 000 MHz
Câbles coaxiaux - Partie 10-2: Spécification intermédiaire Koaxialkabel - Teil 10-2: Rahmenspezifikation für
pour câbles coaxiaux pour la transmission de signaux Koaxialkabel für analoge und digitale Signalübertragung -
analogiques et numériques - Câbles de raccordement à Aussenkabel für Systeme im Bereich von 5 MHz - 3 000
usage extérieur pour les systèmes fonctionnant entre 5 MHz
MHz et 3 000 MHz
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2017-08-18.

It has been drawn up by CLC/SC 46XA.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 59949 Ref. No. prEN 50117-10-2:2017 E

---------------------- Page: 3 ----------------------
oSIST prEN 50117-10-2:2017
prEN 50117-10-2:2017 (E)

1 Contents Page
2 European foreword . 3
3 1 Scope . 4
4 2 Normative references . 4
5 3 Terms and definitions . 5
6 4 Requirements for cable construction and design. 5
7 4.1 General . 5
8 4.2 Inner conductor . 6
9 4.3 Dielectric .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.