iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60809:1996/A4:2009

(Amendment)

Lamps for road vehicles - Dimensional, electrical and luminous requirements

Lamps for road vehicles - Dimensional, electrical and luminous requirements

Covers incandescent lamps to be used in headlights, foglights and signalling lights for road vehicles and specifies the technical requirements with methods of test and basic interchangeability (dimensional, electrical and luminous). Applies amongst others to lamps which may be the subject of legislation. In particular covers those lamps contained in regulation no. 37 of Geneva agreement of 20 March 1958 of the United Nations Economic Commission for Europe (ECE) concerning the adaption of uniform conditions of approval and reciprocal recognition of approval of motor vehicle equipment and parts.

Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen

Lampes pour véhicules routiers - Prescriptions dimensionnelles, électriques et lumineuses

Sijalke za cestna vozila - Dimenzijske, električne in svetlobne zahteve (IEC 60809:1995/A4:2009)

Zajema sijalke, ki se uporabljajo v žarometih, meglenkah in signalnih lučeh za cestna vozila, in določa tehnične zahteve z metodami preskušanja in osnovne zamenljivosti (dimenzijske, električne in svetlobne). Med drugim se uporablja tudi za sijalke, ki so lahko predmet zakonodaje. Zajema predvsem sijalke iz Uredbe št. 37 Ženevskega sporazuma z dne 20. marca 1958 Ekonomske komisije Združenih narodov za Evropo (ECE) v zvezi s prilagoditvijo enotnih pogojev za odobritev in vzajemno priznavanje odobritve opreme in delov motornih vozil.

General Information

Status
Withdrawn
Publication Date
04-Jun-2009
Withdrawal Date
30-Apr-2012
ICS
29.140.20 - Incandescent lamps
43.040.20 - Lighting, signalling and warning devices
Technical Committee
CLC/TC 34 - 'Lamps and related equipment
Drafting Committee
IEC/SC 34A - IEC_SC_34A
Parallel Committee
IEC/SC 34A - IEC_SC_34A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Jan-2018
Completion Date
20-Jan-2018
Ref Project
SIST EN 60809:1996/A4:2009 - Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:1995/A4:2009)

Relations

Replaced By
EN 60809:2015 - Lamps for road vehicles - Dimensional, electrical and luminous requirements
Effective Date
29-Jan-2023
Amends
EN 60809:1996 - Lamps for road vehicles - Dimensional, electrical and luminous requirements
Effective Date
29-Jan-2023

Buy Standard

EN 60809:1996/A4:2009EN 60809:1996/A4:2009
PreviousNext
Amendment
EN 60809:1996/A4:2009
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60809:1996/A4:2009
01-september-2009
6LMDONH]DFHVWQDYR]LOD'LPHQ]LMVNHHOHNWULþQHLQVYHWOREQH]DKWHYH ,(&
$
Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC
60809:1995/A4:2009)
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
(IEC 60809:1995/A4:2009)
Lampes pour véhicules routiers - Prescriptions dimensionnelles, électriques et
lumineuses (CEI 60809:1995/A4:2009)
Ta slovenski standard je istoveten z: EN 60809:1996/A4:2009
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
SIST EN 60809:1996/A4:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60809:1996/A4:2009

---------------------- Page: 2 ----------------------

SIST EN 60809:1996/A4:2009

EUROPEAN STANDARD
EN 60809/A4

NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM

ICS 29.140.20; 43.040.20


English version


Lamps for road vehicles -
Dimensional, electrical and luminous requirements
(IEC 60809:1995/A4:2009)


Lampes pour véhicules routiers -  Lampen für Straßenfahrzeuge -
Prescriptions dimensionnelles, Maße, elektrische
électriques et lumineuses und lichttechnische Anforderungen
(CEI 60809:1995/A4:2009) (IEC 60809:1995/A4:2009)




This amendment A4 modifies the European Standard EN 60809:1996; it was approved by CENELEC on
2009-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60809:1996/A4:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60809:1996/A4:2009
EN 60809:1996/A4:2009 – 2 –
Foreword
The text of document 34A/1314/FDIS, future amendment 4 to IEC 60809:1995, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as amendment A4 to EN 60809:1996 on 2009-05-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 4:2009 to the International Standard IEC 60809:1995 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60809:1996/A4:2009

IEC 60809
Edition 2.0 2009-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 4
AMENDEMENT 4
The sheets contained in this amendment are to be inserted in IEC 60809
Les feuilles de cet amendement sont à insérer dans la CEI 60809
Lamps for road vehicles – Dimensional, electrical and luminous requirements

Lampes pour véhicules routiers – Prescriptions dimensionnelles, électriques et
lumineuses

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX S
ICS 29.140.20; 43.040.20 ISBN 2-8318-1032-5

---------------------- Page: 5 ----------------------

SIST EN 60809:1996/A4:2009

60809 Amend.4 © IEC:2009 60809 Amend.4 © CEI:2009

AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34A: Lampes, du comité d'études 34
de la CEI: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60809:2021/A1:2023(Amendment)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021/A1:2024
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021(Main)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021

This document is applicable to electric light sources (see Note 1) for use in automotive applications, for example in road illumination devices and/or light signalling devices for road vehicles. It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject to other legislations. This document specifies the technical requirements for interchangeability for example dimensional, electrical and photometrical characteristics, and includes test methods. For the light sources listed in this document, the data sheets are contained either in this document or are included by reference to UN Resolution R.E.5. Performance requirements are specified in IEC 60810, for example life, torsion strength, resistance to vibration and shock. The requirements for miniature light sources for supplementary purposes, not subject to legislation, are specified in IEC 60983. NOTE 1 The terms "lamp" and "light source" are both used in this document to mean the same product, so the two terms are interchangeable throughout this document. NOTE 2 In various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050845:1987, 845-07-04), "discharge lamp" (IEC 60050-845:1987, 845-07-17) and "LED lamp". In this document "filament lamp", "discharge lamp" and "LED light source" are used, however, where only "lamp" or "light source" is written, all light sources, independent of the technology used, are meant, unless the context clearly shows that it applies to one kind of technology only. In the UN Regulations, the word "light source" is used for the products specified in this document. NOTE 3 Wherever the term "device" is used, it is meant to designate equipment which is used as a luminaire. It can for instance take the form and purpose of a headlight or signal light.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60809:2015/A3:2019(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN 60809:2015/A3:2019
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2015/A2:2018(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2015/A2:2018

EN-IEC 60809 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as nonreplaceable. This standard is especially applicable to those lamps which are the subject of legislation. In particular, it includes the lamps contained in Regulations No. 37, No. 99, No. 128 and its series of amendments of the Geneva Agreement of 20 March 1958 of the United Nations Economic Commission for Europe (UNECE). However, the standard may be used for other lamps falling under the scope of this standard, as well as lamps which are subject of legislation but not contained in Regulations No. 37, No. 99 and No. 128, e.g. the non-replaceable (filament) lamps and LED modules. For replaceable and standardised lamps, the standard specifies the technical requirements with methods of tests and basic interchangeability (dimensional, electrical and luminous) for lamps of normal production and for standard (étalon) lamps. For most of the requirements given in this standard, reference is made to the “relevant lamp data sheet”. For all lamps listed in Clause 8, data sheets are contained in this standard or included by reference. For other lamps, the relevant data are supplied by the lamp manufacturer or responsible vendor. It could be based on national legislation. Other requirements to replaceable and standardised lamps such as lamp life, luminous flux maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810. Such requirements to non-replaceable lamps are given in this standard. For some test methods, reference is made to IEC 60810. Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in IEC 60983. In countries which legislate for approval, for example under the terms of the aforementioned UN Regulations, it is suggested that reference is made to this standard for assessment of compliance. IEC 60810 and IEC 60983 are not intended for that purpose.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60809:2015/A1:2017(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN 60809:2015/A1:2018

The contents of the interpretation sheet 1 of July 2017 have been included in this copy.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60809:2015(Main)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN 60809:2015

IEC 60809:2014 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as non-replaceable. This third edition cancels and replaces the second edition (1995), its Amendment 1 (1996), its Amendment 2 (2002), its Amendment 3 (2004), its Amendment 4 (2009) and its Amendment 5 (2012). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the introduction of requirements for non-replaceable filament lamps; b) the introduction of requirements for LED light sources.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021/A1:2023(Amendment)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021/A1:2024
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021(Main)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021

This document is applicable to electric light sources (see Note 1) for use in automotive applications, for example in road illumination devices and/or light signalling devices for road vehicles. It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject to other legislations. This document specifies the technical requirements for interchangeability for example dimensional, electrical and photometrical characteristics, and includes test methods. For the light sources listed in this document, the data sheets are contained either in this document or are included by reference to UN Resolution R.E.5. Performance requirements are specified in IEC 60810, for example life, torsion strength, resistance to vibration and shock. The requirements for miniature light sources for supplementary purposes, not subject to legislation, are specified in IEC 60983. NOTE 1 The terms "lamp" and "light source" are both used in this document to mean the same product, so the two terms are interchangeable throughout this document. NOTE 2 In various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050845:1987, 845-07-04), "discharge lamp" (IEC 60050-845:1987, 845-07-17) and "LED lamp". In this document "filament lamp", "discharge lamp" and "LED light source" are used, however, where only "lamp" or "light source" is written, all light sources, independent of the technology used, are meant, unless the context clearly shows that it applies to one kind of technology only. In the UN Regulations, the word "light source" is used for the products specified in this document. NOTE 3 Wherever the term "device" is used, it is meant to designate equipment which is used as a luminaire. It can for instance take the form and purpose of a headlight or signal light.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60809:2015/A3:2019(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN 60809:2015/A3:2019
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2015/A2:2018(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2015/A2:2018

EN-IEC 60809 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as nonreplaceable. This standard is especially applicable to those lamps which are the subject of legislation. In particular, it includes the lamps contained in Regulations No. 37, No. 99, No. 128 and its series of amendments of the Geneva Agreement of 20 March 1958 of the United Nations Economic Commission for Europe (UNECE). However, the standard may be used for other lamps falling under the scope of this standard, as well as lamps which are subject of legislation but not contained in Regulations No. 37, No. 99 and No. 128, e.g. the non-replaceable (filament) lamps and LED modules. For replaceable and standardised lamps, the standard specifies the technical requirements with methods of tests and basic interchangeability (dimensional, electrical and luminous) for lamps of normal production and for standard (étalon) lamps. For most of the requirements given in this standard, reference is made to the “relevant lamp data sheet”. For all lamps listed in Clause 8, data sheets are contained in this standard or included by reference. For other lamps, the relevant data are supplied by the lamp manufacturer or responsible vendor. It could be based on national legislation. Other requirements to replaceable and standardised lamps such as lamp life, luminous flux maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810. Such requirements to non-replaceable lamps are given in this standard. For some test methods, reference is made to IEC 60810. Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in IEC 60983. In countries which legislate for approval, for example under the terms of the aforementioned UN Regulations, it is suggested that reference is made to this standard for assessment of compliance. IEC 60810 and IEC 60983 are not intended for that purpose.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day