EN 61300-3-21:2015

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time

IEC 61300-3-21:2014 is a method to measure the switching time and related performance parameters of an optical switch when the actuation energy is applied or removed to change the state of the switch. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - removal of 'bounce time' from the title; - update and alignment of definitions with IEC 60876-1; - generalization of the detection apparatus beyond an oscilloscope. Keywords: switching time, performance parameters of an optical switch, actuation energy

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-21: Untersuchungen und Messungen - Schaltzeit

Dispositifs d’interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures - Temps de commutation

L'IEC 61300-3-21:2014 comprend une méthode en vue de mesurer le temps de commutation et les paramètres de performances associés d'un commutateur optique, lorsque l'énergie d'activation est appliquée ou enlevée pour modifier l'état du commutateur. Cette deuxième édition annule et remplace la première édition parue en 1998. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédentes: - suppression dans le titre de 'temps de rebondissement'; - mise à jour et alignement des définitions avec l'IEC 60876-1; - généralisation des appareils de détection autres que les oscilloscopes. Mots clés : temps de commutation, paramètres de performances associés d'un commutateur optique, énergie d'activation

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-21. del: Preiskave in meritve - Preklopni čas (IEC 61300-3-21:2014)

Ta del standarda IEC 61300 je metoda za merjenje preklopnega časa in povezanih parametrov zmogljivosti optičnega stikala ob vklopu ali izklopu napajanja za spremembo stanja stikala.

General Information

• Status: Withdrawn
• Publication Date: 17-Dec-2015
• Withdrawal Date: 17-Dec-2018
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Oct-2020
• Completion Date: 25-Oct-2020
• Ref Project: SIST EN 61300-3-21:2016 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time (IEC 61300-3-21:2014)

Relations

• Replaces: EN 61300-3-21:1998 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 61300-3-21:2019 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
• Effective Date: 19-Nov-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-21:2016
01-marec-2016
1DGRPHãþD
SIST EN 61300-3-21:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHLVNDYHLQPHULWYH3UHNORSQLþDV,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-21: Examinations and measurements - Switching time
(IEC 61300-3-21:2014)
Ta slovenski standard je istoveten z: EN 61300-3-21:2015
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-21:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-21:2016

---------------------- Page: 2 ----------------------

SIST EN 61300-3-21:2016


EUROPEAN STANDARD EN 61300-3-21

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2015
ICS 33.180.20 Supersedes EN 61300-3-21:1998
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-21:
Examinations and measurements - Switching time
(IEC 61300-3-21:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-21: Examens et mesures - Temps de 21: Untersuchungen und Messungen - Schaltzeit
commutation (IEC 61300-3-21:2014)
(IEC 61300-3-21:2014)
This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61300-3-21:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61300-3-21:2016
EN 61300-3-21:2015
European foreword
The text of document 86B/3623/CDV, future edition 2 of IEC 61300-3-21, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-3-21:2015.

The following dates are fixed:
(dop) 2016-06-18
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-12-18
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61300-3-21:1998.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61300-3-21:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60876-1 NOTE Harmonized as EN 60876-1.

2

---------------------- Page: 4 ----------------------

SIST EN 61300-3-21:2016
EN 61300-3-21:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
...