Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

This European Standard covers medium power transformers. ‘Medium power transformer’ means a power transformer with a highest voltage for equipment higher than 1,1 kV, but not exceeding 36 kV and a rated power equal to or higher than 5 kVA but lower than 40 MVA. National practices may require the use of highest voltages for equipment up to (but not including) 52 kV, when the rated voltage is less than 36 kV (such as Um = 38,5 kV or Um = 40,5 kV). This is considered to be an unusual case of a large power transformer, where the requirements are those for a medium power transformer with Um = 36 kV. NOTE 1 ‘Large power transformer’ means a power transformer with a highest voltage for equipment exceeding 36 kV and a rated power equal to or higher than 5 kVA, or a rated power equal to or higher than 40 MVA regardless of the highest voltage for equipment. Large power transformers are in the scope of EN 50629. NOTE 2 Transformers with tap changer (DETC or OLTC) are included in this European Standard even if they have separate tapping winding. The object of this European Standard is to set up requirements related to electrical characteristics and design of medium power transformers. The following transformers are excluded from this European Standard: a) instrument transformers, specifically designed to supply measuring instruments, meters, relays and other similar apparatus; b) transformers with low-voltage windings specifically designed for use with rectifiers to provide a DC supply; c) transformers specifically designed to be directly connected to a furnace; d) transformers specifically designed for offshore applications and floating offshore applications; e) transformers specially designed for emergency installations; f) transformers and auto-transformers specifically designed for railway feeding systems; g) earthing or grounding transformers, this is, three-phase transformers intended to provide a neutral point for system grounding purposes; h) traction transformers mounted on rolling stock, this is, transformers connected to an AC or DC contact line, directly or through a converter, used in fixed installations of railway applications; i) starting transformers, specifically designed for starting three-phase induction motors so as to eliminate supply voltage dips; j) testing transformers, specifically designed to be used in a circuit to produce a specific voltage or current for the purpose of testing electrical equipment; k) welding transformers, specifically designed for use in arc welding equipment or resistance welding equipment; l) transformers specifically designed for explosion-proof and underground mining applications; m) transformers specifically designed for deep water (submerged) applications; n) medium Voltage (MV) to Medium Voltage (MV) interface transformers up to 5 MVA; o) large power transformers where it is demonstrated that for a particular application, technically feasible alternatives are not available to meet the minimum efficiency requirements set out by the commission regulation (EU) No 548/2014; p) large power transformers which are like for like replacements in the same physical location/installation for existing large power transformers, where this replacement cannot be achieved without entailing disproportionate costs associated to their transportation and/or installation. In case one of the last two exclusions is claimed, this should be documented at the signature of the contract with a declaration made by the customer. NOTE 3 This standard covers the transformers under the Commission Regulation (EU) No. 548/2014 and gives additional specific guidance for single phase transformers, multi winding transformers and for transformers with OF or OD cooling systems, necessary for the correct application of energy efficiency requirements to these categories of transformers.

Mittelleistungstransformatoren 50 Hz, mit einer höchsten Spannung für Betriebsmittel nicht über 36 kV - Teil 1: Allgemeine Anforderungen

Transformateurs 50 Hz de moyenne puissance, de tension la plus élevée pour le matériel ne dépassant pas 36 kV - Partie 1: Exigences générales

Srednji močnostni transformatorji 50 Hz z najvišjo napetostjo naprave do 36 kV – 1. del: Splošne zahteve

Ta evropski standard zajema srednje transformatorje. »Srednji transformator« označuje transformator z najvišjo napetostjo za opremo, ki je višja od 1,1 kV, vendar ne presega 36 kV, in z nazivno močjo, enako ali višjo od 5 kVA, ki pa ne presega 40 MVA.
Nacionalne prakse lahko zahtevajo uporabo najvišjih napetosti za opremo do (toda ne vključno z) 52 kV, ko je nazivna napetost nižja od 36 kV (kot na primer Um = 38,5 kV ali Um = 40,5 kV). Gre za nenavaden primer velikonapetostnega transformatorja z zahtevami za srednjenapetostni transformator z Um = 36 kV.
OPOMBA 1 »Veliki transformator« označuje transformator z najvišjo napetostjo za opremo, ki je višja od 36 kV in nazivno močjo, enako ali višjo od 5 kVA, ali nazivno močjo, enako ali višjo od 40 MVA, ne glede na najvišjo napetost za opremo. Veliki transformatorji spadajo na področje uporabe standarda EN 50629.
OPOMBA 2: Transformatorji z odcepnim preklopnikom (DETC ali OLTC) so zajeti v tem evropskem standardu, čeprav imajo ločeno navitje odcepa.
Cilj tega evropskega standarda je določanje zahtev v zvezi z električnimi značilnostmi in izdelavo srednjih transformatorjev.
Ta evropski standard ne zajema naslednjih transformatorjev:
a) instrumentnih transformatorjev, ki so posebej izdelani za napajanje merilnih instrumentov, merilnikov, relejev in drugih podobnih aparatov;
b) transformatorjev z nizkonapetostnimi navitji, ki so posebej izdelani za uporabo z usmerniki za izmenično napajanje;
c) transformatorjev, ki so posebej izdelani za neposredno priključitev na peč;
d) transformatorjev, ki so posebej izdelani za uporabo na morju in na plavajočih objektih;
e) transformatorjev, ki so posebej izdelani za zasilne naprave;
f) transformatorjev in avtotransformatorjev, ki so posebej izdelani za sisteme za napajanje železniških naprav;
g) ozemljitvenih transformatorjev, tj. trifaznih transformatorjev za zagotavljanje nevtralne točke za namene ozemljitve sistema;
h) transformatorjev vleke, nameščenih na železniška vozila, tj. transformatorjev, ki so neposredno ali prek pretvornika povezani z enosmernim ali izmeničnim kontaktnim vodnikom in se uporabljajo v stabilnih napravah za železniško uporabo;
i) zagonskih transformatorjev, ki so posebej izdelani za zagon trifaznih asihronskih motorjev z namenom preprečevanja napetostnih upadov;
j) preskusnih transformatorjev, ki so posebej izdelani za uporabo v tokokrogu z namenom proizvajanja določene napetosti ali toka za preskušanje električne opreme;
k) varilnih transformatorjev, ki so posebej izdelani za uporabo v opremi za obločno ali uporovno varjenje;
l) transformatorjev, ki so posebej izdelani za uporabo v protieksplozijskem ali podzemnem okolju;
m) transformatorjev, ki so posebej izdelani za uporabo v globoki vodi (podvodna uporaba);
n) srednjenapetostnih (MV) do srednjenapetostnih (MV) vmesniških transformatorjev do 5 MVA;
o) velikih transformatorjev, kjer je prikazano, da za določeno uporabo tehnično možne alternative, ki bi dosegle minimalne zahteve glede učinkovitosti, ki jih določa uredba komisije (EU) št. 548/2014:
p) velikih transformatorjev, ki so možne zamenjave za obstoječe velike transformatorje na/v istih fizičnih lokacijah/napravah, v primeru da zamenjava slednjih ni mogoča brez nesorazmernih stroškov, ki bi nastali zaradi njihovega prevoza in/ali namestitve.
V primeru navedbe ene od zadnjih dveh izključitev je to potrebno dokumentirati ob podpisu pogodbe, in sicer z izjavo, ki jo je pripravila stranka.
OPOMBA 3: Ta standard zajema transformatorje v skladu z Uredbo Komisije (EU) št. 548/2014 in podaja dodatne posebne smernice za enofazne transformatorje, transformatorje z več navitji in transformatorje s hladilnimi sistemi OF ali OD, ki so potrebni za pravilno uporabo zahtev za energijsko učinkovitost pri teh kategorijah transformatorjev.

General Information

Status
Withdrawn
Publication Date
14-Sep-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Jun-2021

Relations

Buy Standard

Standard
EN 50588-1:2017
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN 50588-1:2017
Slovenian language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50588-1:2017
01-november-2017
1DGRPHãþD
SIST EN 50588-1:2015
SIST EN 50588-1:2015/A1:2016
0RþQRVWQLWUDQVIRUPDWRUMLVUHGQMHPRþL+]]QDMYLãMRQDSHWRVWMRQDSUDYHGR
N9GHO6SORãQH]DKWHYH
Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36
kV - Part 1: General requirements
Mittelleistungstransformatoren 50 Hz, mit einer höchsten Spannung für Betriebsmittel
nicht über 36 kV - Teil 1: Allgemeine Anforderungen
Transformateurs 50 Hz de moyenne puissance, de tension la plus élevée pour le
matériel ne dépassant pas 36 kV - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 50588-1:2017
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 50588-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50588-1:2017

---------------------- Page: 2 ----------------------

SIST EN 50588-1:2017

EUROPEAN STANDARD EN 50588-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2017
ICS 29.180 Supersedes EN 50588-1:2015
English Version
Medium power transformers 50 Hz, with highest voltage for
equipment not exceeding 36 kV - Part 1: General requirements
Transformateurs 50 Hz de moyenne puissance, de tension Mittelleistungstransformatoren 50 Hz, mit einer höchsten
la plus élevée pour le matériel ne dépassant pas 36 kV - Spannung für Betriebsmittel nicht über 36 kV - Teil 1:
Partie 1: Exigences générales Allgemeine Anforderungen
This European Standard was approved by CENELEC on 2017-07-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50588-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 50588-1:2017
EN 50588-1:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 5
3 Terms and definitions . 6
4 Environmental classes . 8
5 Electrical characteristics . 8
5.1 Highest voltages for equipment for winding with U > 1,1 kV . 8
m
5.2 Rated voltage for winding with Um ≤ 1,1 kV . 8
5.3 Tapping . 9
5.4 Connection designations for three phase transformers . 9
6 Load loss, no load loss, PEI, sound power level, short-circuit impedance . 9
6.1 General . 9
6.2 Transformers with rated power S ≤ 3 150 kVA . 10
r
6.3 Transformers with rated power 3 150 kVA < S < 40 000 kVA. 14
r
6.4 Transformers with special requirements . 15
7 Tolerances .
...

ba

SLOVENSKI SIST EN 50588-1


STANDARD november 2017













Srednji močnostni transformatorji 50 Hz z najvišjo napetostjo naprave do
36 kV – 1. del: Splošne zahteve

Medium power transformers 50 Hz, with highest voltage for equipment not
exceeding 36 kV – Part 1: General requirements

Transformateurs 50 Hz de moyenne puissance, de tension la plus élevée pour le
matériel ne dépassant pas 36 kV – Partie 1: Exigences générales

Mittelleistungstransformatoren 50 Hz, mit einer höchsten Spannung für
Betriebsmittel nicht über 36 kV – Teil 1: Allgemeine Anforderungen


















Referenčna oznaka
ICS 29.180 SIST EN 50588-1:2017 (sl)

Nadaljevanje na straneh II do III in od 1 do 32

© 2018-09. Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50588-1 : 2017

NACIONALNI UVOD

Standard SIST EN 50588-1 (sl), Srednji močnostni transformatorji 50 Hz z najvišjo napetostjo naprave
do 36 kV – 1. del: Splošne zahteve, 2017, ima status slovenskega standarda in je istoveten evropskemu
standardu EN 50588-1 (en), Medium power transformers 50 Hz, with highest voltage for equipment not
exceeding 36 kV – Part 1: General requirements, 2017.

Ta standard nadomešča SIST EN 50588-1:2015 in SIST EN 50588-1:2015/A1:2016.

NACIONALNI PREDGOVOR

Evropski standard EN 50588-1:2017 je pripravil tehnični odbor Evropskega komiteja za standardizacijo
v elektrotehniki CLC/TC 14 Močnostni transformatorji. Slovenski standard SIST EN 50588-1:2017 je
prevod evropskega standarda EN 50588-1:2017. V primeru spora glede besedila slovenskega prevoda
v tem standardu je odločilen izvirni evropski standard v angleškem jeziku. Slovensko izdajo standarda
je potrdil tehnični odbor SIST/TC ETR Energetski transformatorji.

Odločitev za privzem tega standarda je dne 1. novembra 2017 sprejel tehnični odbor SIST/TC ETR
Energetski transformatorji.

ZVEZA S STANDARDI

SIST EN 50180 Skoznjiki za napetosti nad 1 kV do 52 kV in tokove od 250 A do 3,15 kA za
transformatorje, polnjene s tekočinami
SIST EN 50181 Vtični skoznjiki za napetosti nad 1 kV do 52 kV in tokove od 250 A do 2,50
kA za opremo, razen za transformatorje, polnjene s tekočinami
SIST EN 50216 (vsi deli) Pribor za energijske transformatorje in dušilke
SIST EN 50329 Železniške naprave – Stabilne naprave električne vleke – Transformatorji
vlečnih tokokrogov
SIST EN 50386 Skoznjiki za napetosti do 1 kV in tokove od 250 A do 5 kA za transformatorje,
polnjene s tekočino
SIST EN 50387 Zbiralčni skoznjiki za napetosti do 1 kV in od 1,25 kA do 5 kA za transformatorje,
polnjene s tekočinami
SIST EN 50464-4 Trifazni oljni distribucijski transformatorji 50 Hz, od 50 kVA do 2 500 kVA z
najvišjo napetostjo naprave do 36 kV – 4. del: Zahteve in preskušanje v zvezi
s tlačnimi kotli z valovito steno
SIST EN 60076-1:2012 Močnostni transformatorji – 1. del: Splošno (IEC 60076-1:2011)
SIST EN 60076-6:2008 Močnostni transformatorji – 6. del: Dušilke (IEC 60076-6:2007)
SIST EN 60076 (vsi deli) Močnostni transformatorji (IEC 60076, vsi deli)
SIST EN 60085 Ocenjevanje toplotnih lastnosti in označevanje električne izolacije (IEC
60085)
SIST EN 60505 Vrednotenje in kvalificiranje električnih izolacijskih sistemov (IEC 60505)
SIST EN 61100 Klasifikacija izolacijskih tekočin glede na vnetišče in čisto kalorično vrednost
(IEC 61100)
SIST EN 61378-1 Konvertorski transformatorji – 1. del: Transformatorji za industrijsko uporabo
(IEC 61378-1)
SIST EN 61869-1:2009 Merilni transformatorji – 1. del: Splošne zahteve
SIST IEC/TR 60616 Oznake priključkov in odcepov močnostnih transformatorjev


II

---------------------- Page: 2 ----------------------

SIST EN 13108-7 : 2017

OSNOVA ZA IZDAJO STANDARDA

‒ privzem standarda EN 50588-1:2017

PREDHODNA IZDAJA

‒ SIST EN 50588-1:2015 in SIST EN 50588-1:2015/A1:2016, Močnostni transformatorji srednje moči
50 Hz z najvišjo napetostjo naprave do 36 kV – 1. del: Splošne zahteve

OPOMBE

– Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v SIST EN 50588-1:2017
to pomeni “slovenski standard”.

– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.

– Ta nacionalni dokument je istoveten EN 50588-1:2017 in je objavljen z dovoljenjem

CEN-CENELEC
Upravni center
Avenue Marnix 17
B-1000 Bruselj


This national document is identical with EN 50588-1:2017 and is published with the
permission of

CEN-CENELEC
Management Centre
Avenue Marnix 17
B -1000 Brussels



III

---------------------- Page: 3 ----------------------

SIST EN 50588-1 : 2017


























(prazna stran)
IV

---------------------- Page: 4 ----------------------

EVROPSKI STANDARD  EN 50588-1
EUROPEAN STANDARD

NORME
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.