EN 62419:2009

Control technology - Rules for the designation of measuring instruments

IEC 62419:2008(E) is applicable to measurement technology. It defines rules for the unambiguous designation of different types of measuring instruments and of measuring instrument features with the intention of enabling unambiguous technical communication over language boundaries. This standard cancels and replaces IEC/PAS 62419 published in 2005. This first edition constitutes a technical revision.

Leittechnik - Regeln für die Benennung von Messgeräten

Technologies de contrôle-commande - Règles pour la désignation des instruments de mesure

L'IEC 62419:2008 s'applique à la technologie de mesure. Elle définit les règles pour une désignation claire des différents types d'instruments de mesure et des caractéristiques des instruments de mesure, dans le but de permettre une communication technique dénuée d'ambiguïté au-delà des barrières linguistiques. La présente norme annule et remplace la CEI/PAS 62419 parue en 2005. Cette première édition constitue une révision technique. La présente version bilingue (2014-04) correspond à la version anglaise monolingue publiée en 2008-11.

Tehnologija nadzora - Pravila za označevanje merilnih instrumentov (IEC 62419:2008)

General Information

• Status: Published
• Publication Date: 11-Feb-2009
• Withdrawal Date: 31-Jan-2012
• ICS: 17.020 - Metrology and measurement in general
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/TC 65 - IEC_TC_65
• Parallel Committee: IEC/TC 65 - IEC_TC_65
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Feb-2009
• Completion Date: 12-Feb-2009
• Ref Project: SIST EN 62419:2009 - Control technology - Rules for the designation of measuring instruments

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62419:2009
01-junij-2009
7HKQRORJLMDQDG]RUD3UDYLOD]DR]QDþHYDQMHPHULOQLKLQVWUXPHQWRY,(&

Control technology - Rules for the designation of measuring instruments
Leittechnik - Regeln für die Benennung von Messgeräten
Technologies de contrôle-commande - Règles pour la désignation des instruments de
mesure
Ta slovenski standard je istoveten z: EN 62419:2009
ICS:
17.020 Meroslovje in merjenje na Metrology and measurement
splošno in general
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 62419:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62419:2009

---------------------- Page: 2 ----------------------

SIST EN 62419:2009

EUROPEAN STANDARD
EN 62419

NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM

ICS 17.020; 25.040.40


English version


Control technology -
Rules for the designation of measuring instruments
(IEC 62419:2008)


Technologies de contrôle-commande -  Leittechnik -
Règles pour la désignation Regeln für die Benennung
des instruments de mesure von Messgeräten
(CEI 62419:2008) (IEC 62419:2008)




This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62419:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62419:2009
EN 62419:2009 – 2 –
Foreword
The text of document 65/429/FDIS, future edition 1 of IEC 62419, prepared by IEC TC 65,
Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62419 on 2009-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62419:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60027 series NOTE  Harmonized in EN 60027 series (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62419:2009
– 3 – EN 62419:2009

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
IEC 60050-300 - International Electrotechnical Vocabulary - -
(IEV) - Electrical and electronic
measurements and measuring instruments -
Part 311: General terms relating to
measurements -
Part 312: General terms relating to electrical
measurements -
Part 313: Types of electrical measuring
instruments -
Part 314: Specific terms according to the type
of instrument


IEC 60050-351 2006 International Electrotechnical Vocabulary - -
(IEV) -
Part 351: Control techno
...