Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

IEC 60153-4:2017 specifies straight hollow metallic tubing of circular waveguides for use as waveguides in electronic equipment. The aim of this recommendation is to specify for hollow metallic waveguides: a) the details necessary to ensure compatibility and, as far as essential, interchangeability; b) test methods; c) uniform requirements for the electrical and mechanical properties. This edition includes the following significant technical changes with respect to the previous edition: a) expand and revise the operation frequency range for waveguides; b) revise the allowance of aperture dimensions; c) revise the test method for aperture dimensions; d) revise the equation of attenuation.

Metallische Hohlleiter - Teil 4: Einzelbestimmungen für Rundhohlleiter

Guides d'ondes métalliques creux - Partie 4: Spécifications applicables aux guides d'ondes circulaires

l'IEC 60153-4:2017 spécifie des tubes métalliques creux rectilignes de guides d'ondes circulaires destinés à être utilisés comme guides d'ondes dans les équipements électroniques. La présente recommandation a pour but de spécifier pour les guides d'ondes métalliques creux: a) les détails nécessaires pour assurer la compatibilité et, dès lors que c’est essentiel, l'interchangeabilité; b) les méthodes d’essai; c) es exigences uniformes pour les propriétés électriques et mécaniques La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Extension et révision de la plage de fréquences de fonctionnement pour les guides d'ondes; b) Révision des tolérances sur les dimensions d'ouvertures; c) Révision de la méthode d'essai des dimensions d'ouverture; d) Révision des équations d'affaiblissement.

Votli kovinski valovodi - 4. del: Ustrezne specifikacije za krožne valovode (IEC 60153-4:2017)

Ta del standarda IEC 60153 določa ravne votle kovinske cevi krožnih valovodov, ki se uporabljajo kot valovodi v elektronski opremi.
S tem priporočilom se za votle kovinske valovode določa:
a) potrebne podrobnosti za zagotovitev združljivosti in, kolikor je nujno, medsebojne zamenljivosti;
b) preskusne metode;
c) enotne zahteve za električne in mehanske lastnosti.

General Information

Status
Published
Publication Date
07-Dec-2017
Withdrawal Date
19-Sep-2020
Current Stage
6060 - Document made available - Publishing
Start Date
08-Dec-2017
Completion Date
08-Dec-2017

Relations

Buy Standard

Standard
EN 60153-4:2018 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60153-4:2018
01-februar-2018
1DGRPHãþD
SIST HD 123.4 S1:2002
Votli kovinski valovodi - 4. del: Ustrezne specifikacije za krožne valovode (IEC
60153-4:2017)
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides (IEC
60153-4:2017)
Ta slovenski standard je istoveten z: EN 60153-4:2017
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60153-4:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60153-4:2018

---------------------- Page: 2 ----------------------

SIST EN 60153-4:2018


EUROPEAN STANDARD EN 60153-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 33.120.10 Supersedes HD 123.4 S1:1977
English Version
Hollow metallic waveguides - Part 4: Relevant specifications for
circular waveguides
(IEC 60153-4:2017)
Guides d'ondes métalliques creux - Partie 4: Spécifications Metallische Hohlleiter - Teil 4: Einzelbestimmungen für
applicables aux guides d'ondes circulaires Rundhohlleiter
(IEC 60153-4:2017) (IEC 60153-4:2017)
This European Standard was approved by CENELEC on 2017-09-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60153-4:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60153-4:2018
EN 60153-4:2017 (E)
European foreword
The text of document 46F/344/CDV, future edition 3 of IEC 60153-4, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60153-4:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-06-20
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-09-20
the document have to be withdrawn

This document supersedes HD 123.4 S1:1977.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60153-4:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60153-1:2016 NOTE Harmonized in EN 60153-1:2016.
ISO/IEC 17025:2005 NOTE Harmonized as EN ISO/IEC 17025:2005.
2

---------------------- Page: 4 ----------------------

SIST EN 60153-4:2018
EN 60153-4:2017 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year

IEC 60050-726 1982
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.