EN 60286-4:2013

Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms

IEC 60286-4:2013 is applicable to stick magazines (including end stoppers) intended to be used for storage of electronic components, for transport from the manufacturer to the customer and for in-house use in the manufacturing plant. They are also used to feed automatic placement machines for surface mounting as well as for through-hole mounting of electronic components. This edition includes the following significant technical changes with respect to the previous edition: Clause 4 describes the guidelines for customer specific stick magazine design. It replaces the magazine design rules for IEC outlined components and rules for orientation of components in stick magazines which have been moved to Annexes A to D.

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 4: Stangenmagazine für elektronische Bauelemente mit verschiedenen Gehäusen

Emballage des composants pour opérations automatisées – Partie 4: Magasins chargeurs pour composants électroniques encapsulés dans des boîtiers de différentes formes

La CEI 60286-4:2013 est applicable aux magasins chargeurs (y compris aux bouchons d'extrémités) destinés au stockage des composants électroniques pour le transport entre le fabricant et le client, et pour l'utilisation interne dans l'installation de fabrication. Ils sont aussi utilisés pour l'alimentation des machines de placement automatique pour le montage en surface ainsi que pour le montage par trous traversants des composants électroniques. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: L'Article 4 décrit les lignes directrices pour la conception de magasins chargeurs sur mesure. Il remplace les règles de conception des magasins pour les composants décrits par la CEI et les règles d'orientation des composants dans les magasins chargeurs qui ont été déplacées dans les Annexes A à D.

Pakiranje komponent za avtomatsko obdelavo - 4. del: Palične posode za elektronske komponente, inkapsulirane v ohišjih različnih oblik

Ta del standarda IEC 60286 se uporablja za palične posode (vključno s končnimi nastavki), ki so namenjene hranjenju elektronskih komponent, prevozu od proizvajalca do stranke in interni uporabi v proizvodnem obratu. Uporabljajo se tudi za strojno podajanje strojem za strojno polaganje in strojno vstavljanje elektronskih komponent.

General Information

• Status: Published
• Publication Date: 07-Nov-2013
• Withdrawal Date: 29-Aug-2016
• ICS: 31.020 - Electronic components in general
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Nov-2013
• Completion Date: 08-Nov-2013
• Ref Project: SIST EN 60286-4:2014 - Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms

Relations

• Replaces: EN 60286-4:1998 - Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60286-4:2014
01-januar-2014
1DGRPHãþD
SIST EN 60286-4:2002
3DNLUDQMHNRPSRQHQW]DDYWRPDWVNRREGHODYRGHO3DOLþQHSRVRGH]D
HOHNWURQVNHNRPSRQHQWHLQNDSVXOLUDQHYRKLãMLKUD]OLþQLKREOLN
Packaging of components for automatic handling - Part 4: Stick magazines for electronic
components encapsulated in packages of different forms
/
Emballage de composants pour opérations automatisées - Partie 4 : Magasins chargeurs
pour composants électroniques encapsulés dans des boîtiers de différentes formes
Ta slovenski standard je istoveten z: EN 60286-4:2013
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.160 =DERMLâNDWOH3ODVWLþQL Cases. Boxes. Crates
]DERML
SIST EN 60286-4:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60286-4:2014

---------------------- Page: 2 ----------------------

SIST EN 60286-4:2014

EUROPEAN STANDARD
EN 60286-4

NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM

ICS 31.020; 31.240 Supersedes EN 60286-4:1998


English version


Packaging of components for automatic handling -
Part 4: Stick magazines for electronic components encapsulated in
packages of different forms
(IEC 60286-4:2013)


Emballage des composants pour Gurtung und Magazinierung von Bauteilen
opérations automatisées – Partie 4: für automatische Verarbeitung -
Magasins chargeurs pour composants Teil 4: Stangenmagazine für elektronische
électroniques encapsulés dans des Bauelemente mit verschiedenen
boîtiers de différentes formes Gehäusen
(CEI 60286-4:2013) (IEC 60286-4:2013)





This European Standard was approved by CENELEC on 2013-08-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60286-4:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60286-4:2014
EN 60286-4:2013 - 2 -

Foreword
The text of document 40/2230/FDIS, future edition 3 of IEC 60286-4, prepared by IEC TC 40, "Capacitors
and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60286-4:2013.

The following dates are fixed:
(dop) 2014-05-30
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-08-30
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60286-4:1998.
EN 60286-4:2013 includes the following significant technical changes with respect to EN 60286-4:1998:

Clause 4 describes the guidelines for customer specific stick magazine design. It replaces the magazine
design rules for IEC outlined components and rules for orientation of components in stick magazines
which have been moved to Annexes Z to D.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60286-4:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
ISO 11469 NOTE  Harmonized as EN ISO 11469.

---------------------- Page: 4 ----------------------

SIST EN 60286-4:2014
- 3 - EN 60286-4:20
...