iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62550:2017

(Main)

Spare parts provisioning

Spare parts provisioning

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.
Keywords: necessary spare parts

Ersatzteilbeschaffung

Approvisionnement en pièces de rechange

IEC 62550:2017 spécifie les exigences relatives à l’approvisionnement en pièces de rechange relevant des activités de supportabilité ayant une incidence sur les caractéristiques de sûreté de fonctionnement et permettant ainsi d’assurer la continuité du fonctionnement des produits, des matériels et des systèmes pour leur application prévue. Le présent document est destiné à être utilisé par un large éventail de fournisseurs, d’organisations de support logistique à la maintenance et d’utilisateurs et peut être appliqué à toutes les entités.
Mots clés : pièces de rechange nécessaires

Oskrba z nadomestnimi deli (IEC 62550:2017)

Ta dokument opisuje zahteve za oskrbo z rezervnimi deli kot del podpornih dejavnosti, ki vplivajo na raven zanesljivosti, da se lahko vzdržuje neprekinjeno delovanje izdelkov, opreme in sistemov za predvideno uporabo.
Ta dokument je namenjen različnim dobaviteljem, organizacijam za podporo vzdrževanja in uporabnikom ter se lahko uporablja za vse elemente.

General Information

Status
Published
Publication Date
23-Mar-2017
Withdrawal Date
23-Feb-2020
ICS
03.120.01 - Quality in general
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Current Stage
6060 - Document made available - Publishing
Start Date
24-Mar-2017
Completion Date
24-Mar-2017
Ref Project
SIST EN 62550:2017 - Spare parts provisioning (IEC 62550:2017)

Buy Standard

EN 62550:2017EN 62550:2017
PreviousNext
Standard
EN 62550:2017
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62550:2017
01-maj-2017
Oskrba z nadomestnimi deli (IEC 62550:2017)
Spare parts provisioning (IEC 62550:2017)
Ta slovenski standard je istoveten z: EN 62550:2017
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 62550:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62550:2017

---------------------- Page: 2 ----------------------

SIST EN 62550:2017


EUROPEAN STANDARD EN 62550

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2017
ICS 03.120.01; 21.020

English Version
Spare parts provisioning
(IEC 62550:2017)
Approvisionnement en pièces de rechange Ersatzteilbeschaffung
(IEC 62550:2017) (IEC 62550:2017)
This European Standard was approved by CENELEC on 2017-02-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62550:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62550:2017
EN 62550:2017
European foreword
The text of document 56/1711/FDIS, future edition 1 of IEC 62550, prepared by
IEC/TC 56 "Dependability" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62550:2017.

The following dates are fixed:
(dop) 2017-11-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-24
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62550:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60300-1 NOTE Harmonized as EN 60300-1.
IEC 60300-3-3:2004 NOTE Harmonized as EN 60300-3-3:2004 (not modified).
IEC 61649 NOTE Harmonized as EN 61649.
IEC 61709 NOTE Harmonized as EN 61709.
IEC 62308 NOTE Harmonized as EN 62308.
IEC 62402 NOTE Harmonized as EN 62402.
IEC 62506 NOTE Harmonized as EN 62506.
2

---------------------- Page: 4 ----------------------

SIST EN 62550:2017



IEC 62550

®


Edition 1.0 2017-01




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Spare parts provisioning



Approvisionnement en pièces de rechange



















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 03.120.01; 21.020 ISBN 978-2-8322-3834-9



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 62550:2017
– 2 – IEC 62550:2017 © IEC 2017
CONTENTS
FOREWORD .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62506:2023(Main)
Methods for product accelerated testing
SIST EN IEC 62506:2024

IEC 62506:2023 provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62853:2018(Main)
Open systems dependability
SIST EN IEC 62853:2018

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. For open systems, security is especially important since the systems are particularly exposed to attack. This document can be used to improve the dependability of open systems and to provide assurance that the process views specific to open systems achieve their expected outcomes. It helps an organization define the activities and tasks that need to be undertaken to achieve dependability objectives in an open system, including dependability related communication, dependability assessment and evaluation of dependability throughout system life cycles. Keywords: dependability of open systems

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62741:2015(Main)
Demonstration of dependability requirements - The dependability case
SIST EN 62741:2015

IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a basic project context where a customer orders a system that meets dependability requirements from a supplier and then manages the system until its retirement. The methods provided in this standard may be modified and adapted to other situations as needed. The dependability case is normally produced by the customer and supplier but can also be used and updated by other organizations. For example, certification bodies and regulators may examine the submitted case to support their decisions and users of the system may update/expand the case, particularly where they use the system for a different purpose. Keywords: dependability, reliability, availability, maintainability, supportability, usability, testability, durability.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-1:2014(Main)
Dependability management - Part 1: Guidance for management and application
SIST EN 60300-1:2014

IEC 60300-1:2014 establishes a framework for dependability management. It provides guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. It presents guidance on planning and implementation of dependability activities and technical processes throughout the life cycle taking into account other requirements such as those relating to safety and the environment. This standard gives guidelines for management and their technical personnel to assist them to optimize dependability. This third edition cancels and replaces the second edition published in 2003 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - an updating of definitions to reflect IEC 60050-191:2014; - an enhanced description of dependability and its attributes; - a more generic approach to dependability management; - revised guidelines for application of dependability management; - a more generic approach to the life cycle; - a framework for dependability standards. Keywords: dependability management

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62506:2013(Main)
Methods for product accelerated testing
SIST EN 62506:2014

IEC 62506:2013 provides guidance on the application of various accelerated test techniques for measurement or improvement of product reliability. Identification of potential failure modes that could be experienced in the use of a product/item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item dependability, or to achieve necessary reliability/availability improvement, all within a compressed or accelerated period of time. This standard addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability may differ from the standard probability of failure occurrence. This standard also extends to present accelerated testing or production screening methods that would identify weakness introduced into the product by manufacturing error, which could compromise product dependability. Keywords: test techniques for measurement or improvement of product reliability

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60706-5:2007(Main)
Maintainability of equipment - Part 5: Testability and diagnostic testing
SIST EN 60706-5:2008

This guide has for purpose to provide guidance for the early consideration of testability aspects in design and development, and to assist in determining effective test procedures as an integral part of operation and maintenance. This second edition constitutes a technical revision. It expands and provides more detail on the techniques and systems broadly outlined in the first edition.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61163-1:2006(Main)
Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
SIST EN 61163-1:2008

This part of IEC 61163 describes particular methods to apply and optimize reliability stress screening processes for lots of repairable hardware assemblies, in cases where the assemblies have an unacceptably low reliability in the early failure period, and when other methods, such as reliability growth programmes and quality control techniques, are not applicable.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60706-3:2006(Main)
Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data
SIST EN 60706-3:2007

This part of IEC 60706 describes the various aspects of verification necessary to ensure that the specified maintainability requirements of an item have been met and provides suitable procedures and test methods. This standard also addresses the collection, analysis and presentation of maintainability related data, which may be required during, and at the completion of, design and during item production and operation.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day