iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62435-7:2021

(Main)

Electronic components - Long-term storage of electronic semiconductor devices - Part 7: Micro-electromechanical devices

Electronic components - Long-term storage of electronic semiconductor devices - Part 7: Micro-electromechanical devices

IEC 62435-7:2020 on long-term storage applies to micro-electromechanical devices (MEMS) in long-term storage that can be used as part of obsolescence mitigation strategy. Long-term storage refers to a duration that may be more than 12 months for products scheduled for storage. Philosophy, good working practice, and general means to facilitate the successful long-term storage of electronic components are also addressed.

Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauelemente - Teil 7: Bauelemente der Mikrosystemtechnik

Composants électroniques - Stockage de longue durée des dispositifs électroniques à semiconducteurs - Partie 7: Dispositifs microélectromécaniques

L'IEC 62435-7:2020 relative au stockage de longue durée s’applique aux dispositifs microélectromécaniques (MEMS - micro-electromechanical device) du stockage de longue durée qui peuvent être utilisés dans le cadre d’une stratégie de réduction de l’obsolescence. Le stockage de longue durée implique une durée qui peut être supérieure à 12 mois, pour les produits destinés à être stockés. Les concepts, les bonnes pratiques professionnelles et les moyens généraux de nature à faciliter un stockage optimum de longue durée de composants électroniques sont aussi traités.

Elektronske komponente - Dolgoročno skladiščenje elektronskih polprevodniških elementov - 7. del: Mikroelektromehanski elementi (IEC 62435-7:2020)

General Information

Status
Published
Publication Date
21-Jan-2021
ICS
31.020 - Electronic components in general
Technical Committee
CLC/SR 47 - Semiconductor devices
Drafting Committee
IEC/TC 47 - IEC_TC_47
Current Stage
6060 - Document made available - Publishing
Start Date
22-Jan-2021
Completion Date
22-Jan-2021
Ref Project
SIST EN IEC 62435-7:2021 - Electronic components - Long-term storage of electronic semiconductor devices - Part 7: Microelectromechanical devices (IEC 62435-7:2020)

Buy Standard

EN IEC 62435-7:2021EN IEC 62435-7:2021
PreviousNext
Standard
EN IEC 62435-7:2021
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62435-7:2021
01-marec-2021
Elektronske komponente - Dolgoročno skladiščenje elektronskih polprevodniških
elementov - 7. del: Mikroelektromehanski elementi (IEC 62435-7:2020)
Electronic components - Long-term storage of electronic semiconductor devices - Part 7:
Microelectromechanical devices (IEC 62435-7:2020)
Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauelemente - Teil 7:
Bauelemente der Mikrosystemtechnik (IEC 62435-7:2020)
Composants électroniques - Stockage de longue durée des dispositifs électroniques à
semiconducteurs - Partie 7: Dispositifs microélectromécaniques (IEC 62435-7:2020)
Ta slovenski standard je istoveten z: EN IEC 62435-7:2021
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN IEC 62435-7:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62435-7:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62435-7:2021


EUROPEAN STANDARD EN IEC 62435-7

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2021
ICS 31.020

English Version
Electronic components - Long-term storage of electronic
semiconductor devices - Part 7: Micro-electromechanical
devices
(IEC 62435-7:2020)
Composants électroniques - Stockage de longue durée des Elektronische Bauteile - Langzeitlagerung elektronischer
dispositifs électroniques à semiconducteurs - Partie 7: Halbleiterbauelemente - Teil 7: Bauelemente der
Dispositifs microélectromécaniques Mikrosystemtechnik
(IEC 62435-7:2020) (IEC 62435-7:2020)
This European Standard was approved by CENELEC on 2021-01-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62435-7:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62435-7:2021
EN IEC 62435-7:2021 (E)
European foreword
The text of document 47/2664/FDIS, future edition 1 of IEC 62435-7, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62435-7:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-10-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-01-08
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62435-7:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC/TR 62258-3 NOTE Harmonized as CLC/TR 62258-3
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62435-7:2021
EN IEC 62435-7:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publicati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62435-9:2021(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 9: Special cases
SIST EN IEC 62435-9:2021

IEC 62435-9:2021 specifies storage practices encompassing silicon and semiconductor device building blocks of all types that are integrated together to into products in the form of either packages or boards that can be stored as fully assembled units or partial assemblies. Special attention is given to memories as components and assemblies although methods also apply to heterogeneous components. Guidelines and requirements for customer-supplier interaction are provided to manage the complexity. NOTE In IEC 62435 (all parts), the term "components" is used interchangeably with dice, wafers, passives and packaged devices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62435-8:2020(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 8: Passive electronic devices
SIST EN IEC 62435-8:2020

IEC 62435-8:2020 on long-term storage is applied to passive electronic devices in long-term storage that can be used as part of obsolescence mitigation strategy. Long-term storage refers to a duration that can be more than 12 months for product scheduled for storage. Storage typically begins when components are packed at the originating supplier where the pack date or date code are assigned to the product. It is the responsibility of the distributor and the customer to control and manage the aging inventory upon receipt of the dated product. Alternatively, a supplier-customer agreement can be established to manage the aging inventory. Philosophy, good working practice, and general means to facilitate the successful long-term storage of electronic components are also addressed.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62435-3:2020(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 3: Data
SIST EN IEC 62435-3:2020

IEC 62435-3:2020 describes the aspects of data storage that are necessary for successful use of electronic components being stored after long periods while maintaining traceability or chain of custody. It defines what sort of data needs to be stored alongside the components or dies and the best way to do so in order to avoid losing data during the storage period. As defined in this document, long-term storage refers to a duration that can be more than twelve months for products scheduled for long duration storage. Philosophy, good working practice, and general means to facilitate the successful long-term-storage of electronic components are also addressed. NOTE: In IEC 62435 (all parts), the term "components" is used interchangeably with dice, wafers, passives and packaged devices.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62435-6:2018(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 6: Packaged or finished devices
SIST EN IEC 62435-6:2019

IEC 62435-6:2018 on long-term storage applies to packaged or finished devices in long-term storage that can be used as part of obsolescence mitigation strategy. Long-term storage refers to a duration that can be more than 12 months for product scheduled for storage. Philosophy, good working practice, and general means to facilitate the successful long-term storage of electronic components are also addressed.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62435-4:2018(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage
SIST EN IEC 62435-4:2018

IEC 62435-4:2018(E) specifies long-term storage methods and recommended conditions for long-term storage of electronic components including logistics, controls and security related to the storage facility. Long-term storage refers to a duration that may be more than 12 months for products scheduled for long duration storage. The philosophy of such storage, good working practices and general means to facilitate the successful long-term storage of electronic components are also addressed.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62435-2:2017(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms
SIST EN 62435-2:2017

IEC 62435-2:2017 is related to deterioration mechanisms and is concerned with the way that components degrade over time depending on the storage conditions applied. This part also includes guidance on test methods that may be used to assess generic deterioration mechanisms. Typically, this part is used in conjunction with IEC 62435-1:2017 for any device long-term storage whose duration may be more than 12 months for product scheduled for long duration storage.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62435-1:2017(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 1: General
SIST EN 62435-1:2017

IEC 62435-1:2017 on long-term-storage covers the terms, definitions and principles of long-term-storage that can be used in as an obsolescence mitigation strategy. Long-term storage refers to a duration that can be more than 12 months for products scheduled for long duration storage. Philosophy, good working practice, and general means to facilitate the successful long-term-storage of electronic components are also addressed. This standard cancels and replaces IEC/PAS 62435 published in 2005. This first edition constitutes a technical revision.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62435-5:2017(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices
SIST EN 62435-5:2017

IEC 62435-5:2017 is applicable to long-term storage of die and wafer devices and establishes specific storage regimen and conditions for singulated bare die and partial or complete wafers of die including die with added structures such as redistribution layers and solder balls or bumps or other metallisation. This part also provides guidelines for special requirements and primary packaging that contain the die or wafers for handling purposes. Typically, this part is used in conjunction with IEC 62435-1:2017 for long-term storage of devices whose duration can be more than 12 months for products scheduled for long duration storage.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63203-402-2:2024(Main)
Wearable electronic devices and technologies - Part 402-2: Performance measurement of fitness wearables - Step counting
SIST EN IEC 63203-402-2:2024

IEC 63203-402-2:2024 specifies test methods for measuring and evaluating the performance, reliability, and accuracy of the step counting feature in any wearable device that can count steps (e.g. activity and fitness trackers, smart bands, smart shoes, and smart insoles). These standard test methods exclude the evaluation of data associated with travel distance or calorie consumption.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63203-402-3:2024(Main)
Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate
SIST EN IEC 63203-402-3:2024

IEC 63203-402-3:2024 specifies terms, a measurement protocol, and a test to evaluate the accuracy of wearables that measure heart rate with a photoplethysmography (PPG) sensor. While this document can be used to measure a variety of different devices claiming to report heart rate, care will be taken when testing in countries that differentiate between heart rate and pulse rate. This measurement protocol is not intended to evaluate medical devices associated with the IEC 60601 series or ISO 80601 series.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day