Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers

REN/ERM-EMC-234-2

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opemo in storitve - 2. del: Posebni pogoji za radiotelefonske VHF oddajnike in sprejemnike

General Information

Status
Published
Publication Date
23-Aug-2006
Current Stage
12 - Completion
Due Date
18-Jun-2004
Completion Date
10-Jun-2004
Mandate

Relations

Buy Standard

Standard
EN 301 843-2 V1.2.1:2005
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 843-2 V1.2.1:2005
01-februar-2005
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) -
Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opemo in
storitve - 2. del: Posebni pogoji za radiotelefonske VHF oddajnike in sprejemnike
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific
conditions for VHF radiotelephone transmitters and receivers
Ta slovenski standard je istoveten z: EN 301 843-2 Version 1.2.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 843-2 V1.2.1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 843-2 V1.2.1:2005

---------------------- Page: 2 ----------------------

SIST EN 301 843-2 V1.2.1:2005

ETSI EN 301 843-2 V1.2.1 (2004-06)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for marine radio equipment and services;
Part 2: Specific conditions for VHF radiotelephone
transmitters and receivers

---------------------- Page: 3 ----------------------

SIST EN 301 843-2 V1.2.1:2005
 2 ETSI EN 301 843-2 V1.2.1 (2004-06)



Reference
REN/ERM-EMC-234-2
Keywords
EMC, maritime, regulation, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2004.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 843-2 V1.2.1:2005
 3 ETSI EN 301 843-2 V1.2.1 (2004-06)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.6
4 Test conditions.6
4.1 General.6
4.2 Arrangements for test signals .7
4.2.1 Arrangements for test signals at the input of the transmitter .7
4.2.2 Arrangements for test signals at the output of the transmitter .7
4.2.3 Arrangements for test signals at the input of the receiver.7
4.2.4 Arrangements for test signals at the output of the receiver.7
4.2.5 Arrangements for testing transmitter and receiver together (as a system) .7
4.3 Exclusion bands.7
4.3.1 Exclusion bands for receivers and receiver parts of transceivers.7
4.3.2 Exclusion band for transmitters .7
4.4 Narrow band responses on receivers .8
4.5 Normal test modulation.8
5 Performance assessment.8
5.1 General.8
5.2 Equipment which can provide a continuous communication link .8
5.3 Equipment which does not provide a continuous communication link .8
5.4 Ancillary equipment.8
5.5 Equipment classification.8
6 Performance criteria.9
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers.9
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers .9
6.3 Performance criteria C applied to power supply failure .9
6.4 Performance check.9
6.4.1 Transmitter.9
6.4.2 Receiver.9
6.5 Performance criteria for equipment which does not provide a continuous communication link.10
6.6 Performance criteria for ancillary equipment tested on a stand alone basis .10
7 Applicability overview.10
7.1 Emission.10
7.1.1 General.10
7.1.2 Special conditions.10
7.2 Immunity.10
7.2.1 General.10
7.2.2 Special conditions.10
Annex A (informative): Examples of types of marine radiotelephone equipment in the scope
of the present document .11
A.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF
bands.11
Annex B (informative): The EN title in the official languages .12
History .13

ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 843-2 V1.2.1:2005
 4 ETSI EN 301 843-2 V1.2.1 (2004-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [6] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulation.
The present document, together with EN 301 843-1 [1], is intended to become a Harmonized Standard, the reference of
which will be published in the Official Journal of the European Communities referencing the Council Directive on the
approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive")
(89/336/EEC [3] as amended), and Directive 1999/5/EC of the European Parliament and of the Council of 9 March
1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
(the "R&TTE Directive" [2]).
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 4 June 2004
Date of latest announcement of this EN (doa): 30 September 2004
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2005
Date of withdrawal of any conflicting National Standard (dow): 31 March 2006

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 843-2 V1.2.1:2005
 5 ETSI EN 301 843-2 V1.2.1 (2004-06)
1 Scope
The present document together with EN 301 843-1 [1], covers the assessment of VHF radiotelephone transmitters and
receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone
transmitters and receivers are not included in the present document. Such technical specifications are found in the
related product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
VHF radiotelephone transmitters and receivers for the maritime mobile service, and the associated ancillary equipment.
Examples of types of radiotelephone transmitters and receivers for the maritime mobile service covered by the present
document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 843-1 [1], the provisions of the present document take precedence.
The electromagnetic environment used in the present document to develop the technical specifications encompasses the
electromagnetic environment onboard ships as identified in EN 60945 [5].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly availa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.