Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Amendement 56 - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres

General Information

Status
Published
Publication Date
07-Jul-2019
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
19-Jul-2019
Completion Date
08-Jul-2019
Ref Project

Buy Standard

Standard
IEC 60061-3:1969/AMD56:2019 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
English and French language
51 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME IEC



INTERNATIONALE



INTERNATIONAL 60061-3


STANDARD

AMENDEMENT 56

AMENDMENT 56



2019-07







Amendement 56



Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité

et de la sécurité –


Partie 3:

Calibres





Amendment 56
Lamp caps and holders together with

gauges for the control of interchangeability
and safety –
Part 3:
Gauges


Les feuilles de cet amendement sont à insérer dans
l'IEC 60061­3 (1969)

The sheets contained in this amendment are to be inserted
in IEC 60061­3 (1969)
 IEC 2019 Droits de reproduction réservés – Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

---------------------- Page: 1 ----------------------
NORME IEC



INTERNATIONALE



INTERNATIONAL 60061-3


STANDARD Edition 3.56



2019-07



Modifiée selon les compléments/Amended in accordance with supplements:


A(1970), B(1971), C(1971), D(1972), E(1972), F(1975),
G(1977), H(1980), J(1983), K(1987), L(1989), M(1991), N(1994),


P(1994), Q(1995), R(1996), S(1996), T(1996), U(1997),

et les amendements/amendments 20(1998) 21(1999), 22(1999), 23(2000),

24(2001), 25(2001), 26(2001), 27(2002), 28(2002), 29(2002), 30 (2003), 31(2003),
32(2003), 33(2004), 34(2004), 35(2005), 36(2006) 37(2006), 38(2007), 39(2009),
40(2009), 41(2010), 42(2010), 43(2011), 44(2011), 45(2011), 46(2012), 47(2013),

48(2013), 49(2014), 50(2015), 51(2015), 52(2016), 53(2017), 54(2017),

55(2018) et/and 56(2019)



Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 3:
Calibres

Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges


 IEC 2019 Droits de reproduction réservés – Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

---------------------- Page: 2 ----------------------
IEC 60061-3:1969/AMD56:2019  IEC 2019

SOMMAIRE CONTENTS

CALIBRES – SOMMAIRE PAR DÉSIGNATION GAUGES – CONTENTS BY DESIGNATION

Feuilles Sheet
Calibre «Entre» pour culots sur lampes "Go" gauge for caps on finished
terminées BA20 . 7006-2-3 lamps BA20 . 7006-2-3
Calibre d'acceptation pour culots B22d destinés à Acceptance gauge for B22d caps intended for
un enfilage automatique . 7006-3-1 automatic wire threading . 7006-3-1
Calibres «Entre» pour culots à deux broches G1.27, "Go" gauges for bi-pin caps G1.27, GX1.27,
GX1.27, GY1.3, G2.54, GX2.54, GY2.5, . 7006-4-2 GY1.3, G2.54, GX2.54, GY2.5, . 7006-4-2
Calibres pour vérifier l'insertion des culots dans Gauges for testing the insertion of caps
les douilles B15d, B22d & BY22d . 7006-4A-2 in lampholders B15d, B22d & BY22d . 7006-4A-2
Calibres pour vérifier la tenue des culots B15d Gauges for testing the retention of B15d and
et B22d dans la douille . 7006-4B-1 B22d caps in the holder . 7006-4B-1
Calibre «Entre» pour culot préfocus "Go" gauge for prefocus cap
PX26d, PY26d-1 PY26d-7 . 7006-5-3 PX26d, , PY26d-1 PY26d-7 . 7006-5-3
Calibre «Entre» et «N'Entre Pas» pour les languettes "Go" and "Not Go" gauge for the tabs of prefocus
du culot préfocus PX26 et PY26d . 7006-5A-2 cap PX26 and PY26d. 7006-5A-2
Calibre «N'Entre Pas» pour la dimension Mmin "Not Go" gauge for dimension Mmin of prefocus
du culot préfocus PX26, PY26d-1 to PY26d-7 . 7006-5B-3 cap PX26, PY26d-1 to PY26d-7 . 7006-5B-3
Calibre «Entre» pour douille "Go" gauge for lampholder
PX26d, PY26d-1 to PY26d-7 . 7006-5C-2 PX26d, PY26d-1 to PY26d-7 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.