IEC 61196-1-119:2012

Coaxial communication cables - Part 1-119: Electrical test methods - RF power rating

IEC 61196-1-119:2012(E) defines the requirements to determine the average power handling capability of a coaxial cable at specified frequencies at ambient temperatures.

General Information

• Status: Published
• Publication Date: 24-Sep-2012
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: SC 46A - Coaxial cables
• Drafting Committee: WG 3 - TC 46/SC 46A/WG 3
• Current Stage: DELPUB - Deleted Publication
• Start Date: 05-Dec-2018
• Completion Date: 12-May-2020

Relations

• Revised: IEC 61196-1-119:2020 - Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61196-1-119


®


Edition 1.0 2012-09



INTERNATIONAL



STANDARD






Coaxial communication cables –
Part 1-119: Electrical test methods – RF power rating



IEC 61196-1-119:2012(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED


Copyright © 2012 IEC, Geneva, Switzerland


All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.



IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]

CH-1211 Geneva 20 [e-mail]

Switzerland www.iec.ch


About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

---------------------- Page: 2 ----------------------
IEC 61196-1-119



®



Edition 1.0 2012-09







INTERNATIONAL





STANDARD






















Coaxial communication cables –

Part 1-119: Electrical test methods – RF power rating




























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
K


ICS 33.120.10 ISBN 978-2-83220-391-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – 61196-1-119 © IEC:2012(E)



CONTENTS




FOREWORD . 3

1 Scope . 5

2 Normative references . 5

3 Terms and definitions . 5


4 Symbols . 5

5 Methodology . 7
5.1 Method A . 7
5.2 Method B . 7
6 Temperature test . 7
6.1 Procedure: General considerations . 7
6.2 Procedure: RF test – Method A . 7
6.3 Procedure: Low frequency power AC test – Method B. 8
7 Attenuation test. 8
7.1 Conduct attenuation test . 8
7.2 Calculate A and B coefficients – Method B . 8
7.3 Calculate the A and A coefficients – Method B . 9
i o
8 Power calculation . 9
8.1 Determined from AC test – Method B . 9
8.2 Determined from RF test – Method A . 10
8.3 Adjustment to other frequencies . 10
9 Test report . 10
10 Requirements . 10

---------------------- Page: 4 ----------------------
61196-1-119 © IEC:2012(E) – 3 –


INTERNATIONAL ELECTROTECHNICAL COMMISSION


____________




COAXIAL COMMUNICATION CABLES –



Part 1-119: Electrical test methods – RF power rating



FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61196-1-119 has been prepared by subcommittee 46A: Coaxial
cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46A/1094/FDIS 46A/1116/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 5 ----------------------
– 4 – 61196-1-119 © IEC:2012(E)


A list of all the parts in the IEC 61196 series published under the general title Coaxial

communication cables can be found on the IEC website.


The committee has decided that the contents of this publication will remain unchanged until the

stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to

the specific publication. At this date, the publication will be


• reconfirmed,

• withdrawn,

• replaced by a revised edition, or

• amended.

A bilingual version of this publication may be issued at a later date.

---------------------- Page: 6 ----------------------
61196-1-119 © IEC:2012(E) – 5 –


COAXIAL COMMUNICATION CABLES –



Part 1-119: Electrical test methods – RF power rating








1 Scope


This part of IEC 61196 defines the requirements to determine the average power handling

capability of a coaxial cable at specified frequencies at ambient temperatures.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
IEC 61196-1, Coaxial communication cables – Part
...