Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

IEC 60352-7:2020 is available as IEC 60352-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60352-7:2020 is applicable to spring clamp connections made with stripped wire without further preparation:
- solid conductors of 0,32 mm to 3,7 mm nominal diameter (0,08 mm2 to 10 mm2 cross‑section), or
- stranded conductors of 0,08 mm2 to 10 mm2 cross-section, or
- flexible conductors of 0,08 mm2 to 10 mm2 cross-section,
according to IEC 60228 or IEC 60189-3 for use in electrical and electronic equipment and components.
Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this document is to determine the suitability of spring clamp connections under specified mechanical, electrical and atmospheric conditions. This second edition cancels and replaces the first edition of IEC 60352-7, published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) correction of the two flow charts in Figure 6 and Figure 7,
b) split the content into more clauses for better separation between full test schedule and basic test schedule,
c) relocating the content of former Clause 6 Practical guidance into an informative Annex A, as now common in the IEC 60352 series for solderless connections,
d) clarification on conductor types with reference to classes defined in IEC 60228.

Connexions sans soudure - Partie 7: Connexions à ressort - Règles générales, méthodes d’essai et guide pratique

IEC 60352-7:2020 est disponible sous forme de IEC 60352-7:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
IEC 60352-7:2020 s’applique aux connexions à ressort réalisées avec du fil dénudé sans autre préparation:
– sur des âmes massives de 0,32 mm à 3,7 mm de diamètre nominal (section: 0,08 mm2 à 10 mm2), ou
– sur des âmes câblées de section: 0,08 mm2 à 10 mm2, ou
– sur des âmes souples de section: 0,08 mm2 à 10 mm2,
conformément à l’IEC 60228 ou l’IEC 60189-3, utilisées dans les équipements et composants électriques et électroniques.
Des informations sur les matières et des résultats provenant de l’expérience industrielle y sont inclus en supplément aux procédures d’essai, pour assurer des connexions électriquement stables dans les conditions d’environnement prescrites.
L’objet du présent document est de déterminer la conformité des connexions à ressort dans des conditions mécaniques, électriques et atmosphériques spécifiées.
Cette deuxième édition de l'IEC 60352-7 annule et remplace la première édition parue en 2003. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) correction des deux tableaux synoptiques représentés à la Figure 6 et à la Figure 7;
b) répartition du contenu selon un plus grand nombre de paragraphes pour une meilleure distinction entre programme d’essais complet et programme d’essais de base;
c) déplacement du contenu de l’ancien Article 6, Guide pratique, dans une Annexe A informative, comme il est désormais d’usage dans la série IEC 60352 pour les connexions sans soudure;
d) clarification des types d’âmes en faisant référence aux classes définies dans l’IEC 60228.
La présente version bilingue (2021-08) correspond à la version anglaise monolingue publiée en 2020-12.

General Information

Status
Published
Publication Date
15-Dec-2020
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
19-Jan-2021
Completion Date
16-Dec-2020
Ref Project

Relations

Buy Standard

Standard
IEC 60352-7:2020 - Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
English language
30 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60352-7:2020 - Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
English and French language
65 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 60352-7
®


Edition 2.0 2020-12
INTERNATIONAL
STANDARD



Solderless connections –
Part 7: Spring clamp connections – General requirements, test methods and
practical guidance
IEC 60352-7:2020-12(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC 60352-7

®


Edition 2.0 2020-12




INTERNATIONAL



STANDARD



















Solderless connections –

Part 7: Spring clamp connections – General requirements, test methods and

practical guidance

























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 31.220.10 ISBN 978-2-8322-9181-8




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC 60352-7:2020 © IEC:2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Requirements . 10
4.1 Workmanship . 10
4.2 Tools . 10
5 Pre-requisites for basic test schedule . 10
5.1 Spring clamp terminations . 10
5.1.1 Materials . 10
5.1.2 Surface finishes . 11
5.1.3 Desig
...

IEC 60352-7
®

Edition 2.0 2020-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Solderless connections –
Part 7: Spring clamp connections – General requirements, test methods and
practical guidance

Connexions sans soudure –
Partie 7: Connexions à ressort – Règles générales, méthodes d’essai et guide
pratique

IEC 60352-7:2020-12(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.