Safety of machinery - Laser processing machines - Part 1: Laser safety requirements

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).
Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.
This document is applicable to machines using laser radiation to process materials.
It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications:
- photolithography;
- stereolithography;
- holography;
- medical applications (per IEC 60601-2-22);
- data storage.

General Information

Status
Published
Publication Date
01-Apr-2020
Current Stage
PPUB - Publication issued
Start Date
01-Jul-2020
Completion Date
28-Apr-2020
Ref Project

Buy Standard

Standard
ISO 11553-1:2020 - Safety of machinery - Laser processing machines - Part 1: Laser safety requirements
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11553-1
Second edition
2020-04
Safety of machinery — Laser
processing machines —
Part 1:
Laser safety requirements
Sécurité des machines — Machines à laser —
Partie 1: Exigences de sécurité laser
Reference number
ISO 11553-1:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 11553-1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11553-1:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Hazards generated by laser radiation . 5
4.1 General . 5
4.2 Laser radiation hazards/sources of laser radiation emission . 6
4.3 Laser radiation hazards induced by external effects (interferences) . 7
4.4 Characteristics of laser radiation . 7
5 Safety requirements and measures . 8
5.1 General requirements . 8
5.2 Risk assessment with regard to laser radiation hazards . 8
5.3 Implementation of risk reduction measures. 9
5.3.1 General. 9
5.3.2 Safety measures against laser radiation hazards in dependence of the locations . 9
5.3.3 Safety measures against laser radiation hazards.10
5.3.4 Engineering control measures .13
6 Verification of the safety requirements and risk reduction measures .14
7 Information for use .15
8 Labelling .16
Annex A (informat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.