Measurement procedures for materials used in photovoltaic modules - Part 5-2: Edge seals - Durability evaluation guideline

IEC TS 62788-5-2:2020 provides guidelines to assess the ability of an edge seal to prevent moisture ingress from the edges of PV modules. This document does not cover frame adhesives (sometimes colloquially referred to as edge seals) which by design do not serve to prevent moisture ingress to a meaningful degree. Edge seals should keep moisture out, remain adhered, and maintain electrically insulation from the environment. Much of the testing can be done on the material level, but given the fact that there are multiple surfaces, materials interactions, and mechanical stresses, testing on mini modules or modules is necessary. To accomplish this, this document contains three types of test sample types, materials, mini-modules, and full-size modules. It is intended that a quick evaluation and comparison can be made using materials only. This would be followed up by more rigorous tests using mini-modules where all the interfaces are correctly represented. And finally, full-size module tests are used to evaluate the actual construction process to allow unanticipated concerns to be addressed.

General Information

Status
Published
Publication Date
21-Jun-2020
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
22-Jun-2020
Completion Date
22-Jun-2020
Ref Project

Buy Standard

Technical specification
IEC TS 62788-5-2:2020 - Measurement procedures for materials used in photovoltaic modules - Part 5-2: Edge seals - Durability evaluation guideline
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TS 62788-5-2
®

Edition 1.0 2020-06

TECHNICAL
SPECIFICATION

colour
inside


Measurement procedures for materials used in photovoltaic modules –
Part 5-2: Edge seals – Durability evaluation guideline

IEC TS 62788-5-2:2020-06(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC TS 62788-5-2

®


Edition 1.0 2020-06




TECHNICAL



SPECIFICATION








colour

inside










Measurement procedures for materials used in photovoltaic modules –

Part 5-2: Edge seals – Durability evaluation guideline


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 27.160 ISBN 978-2-8322-8387-5




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC TS 62788-5-2:2020  IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Testing . 7
4.1 General . 7
4.2 Material level tests . 7
4.2.1 Moisture ingress . 7
4.2.2 Adhesion . 7
4.2.3 Dielectric strength . 7
4.2.4 Material specimen UV exposure conditions . 7
4.2.5 Volume resistivity .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.