iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60068-2-65:2013

(Main)

Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

IEC 60068-2-65:2013 provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. This second edition cancels and replaces the second edition, published in 1993, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- minor technical and editorial changes were made throughout the document as originally requested by the DE National Committee;
- following comments at the CD stage, particularly from the UK National Committee, significant technical and editorial additions were made to the standard for acoustic testing employing the progressive wave tube technique.

Essais d'environnement - Partie 2-65: Essais - Essai Fg: Vibrations - Méthode induite acoustiquement

La CEI 60068-2-65:2013 fournit des méthodes normalisées et un guide pour la conduite d'essais acoustiques afin de déterminer l'aptitude d'un spécimen à résister à des vibrations provoquées par un environnement de niveau de pression acoustique spécifié auquel il est, ou est susceptible d'être, exposé. Cette deuxième édition annule et remplace la deuxième édition, publiée en 1993, dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- des modifications techniques et rédactionnelles mineures ont été faites dans toute la norme, tel qu'il a été demandé à l'origine par le Comité national allemand;
- conformément aux commentaires émis au stade CD, en particulier ceux du Comité national britannique, des ajouts techniques et éditoriaux significatifs ont été réalisés dans la norme pour l'essai acoustique employant le technique du tube à ondes progressives.

General Information

Status
Published
Publication Date
05-Feb-2013
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
19.040 - Environmental testing
29.020 - Electrical engineering in general
Technical Committee
TC 104 - Environmental conditions, classification and methods of test
Drafting Committee
MT 17 - TC 104/MT 17
Current Stage
PPUB - Publication issued
Start Date
15-Mar-2013
Completion Date
06-Feb-2013
Ref Project

Buy Standard

IEC 60068-2-65:2013 - Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced methodIEC 60068-2-65:2013 - Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
PreviousNext
Standard
IEC 60068-2-65:2013 - Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
English and French language
61 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 60068-2-65
®

Edition 2.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Environmental testing –
Part 2-65: Tests – Test Fg: Vibration – Acoustically induced method

Essais d’environnement –
Partie 2-65: Essais – Essai Fg: Vibrations – Méthode induite acoustiquement

IEC 60068-2-65:2013

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2013 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC 60068-2-65

®


Edition 2.0 2013-02




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Environmental testing –

Part 2-65: Tests – Test Fg: Vibration – Acoustically induced method




Essais d’env
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should');
- Table 1 has been updated.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-55:2013(Main)
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.
This publication is to be read in conjunction with IEC 60068-1:1988.

  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-78:2012(Main)
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

IEC 60068-2-78:2012 is available as IEC Standards+ 60068-2-78:2012 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-2-78:2012 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity. The object of this standard is to investigate the effect of high humidity at constant temperature without condensation on a specimen over a prescribed period. It is applicable to small equipment or components as well as large equipment, and can be applied to both heat-dissipating and non-heat-dissipating specimens. This second edition cancels and replaced the first edition, published in 2001 and constitutes a technical revision. This edition includes editorial and format changes with respect to the previous edition:
- The test chamber from IEC 60068-3-6 has been introduced.

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-80:2005(Main)
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

IEC 60068-2-80:2005 Intended for general application for testing specimens when simulation is required of vibration excitation of a complex and mixed nature. The purpose of the test is to demonstrate the adequacy of the specimen to resist the specified mixed mode excitation without unacceptable degradation of its functional and/or structural performance. It is particularly useful for tailoring mixed mode environments where measured data are available for the real life environment. The test also helps reveal the accumulated effects of stress induced by random vibration, mixed with sine and/or random, and the resulting mechanical weakness and degradation in specified performances, and to use this information, in conjunction with the relevant specification, to assess the acceptability of specimens. In some cases, this standard may also be used to demonstrate the mechanical robustness of specimens. This standard is applicable to specimens which may be subjected to vibration of a random and/or a combination of random and deterministic nature resulting from transportation or real life environments, for example in aircraft, space vehicles and for items in their transportation container when the latter may be considered as part of the specimen itself. Although primarily intended for electrotechnical specimens, this standard is not restricted to such specimens and may be used in other fields where desired.

  • Standard
    83 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-8:2003(Main)
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

Provides guidance for selecting amongst the IEC 60068-2 stationary vibration test methods Fc sinusoidal, Fh random and F(x) Mixed mode vibration. The different steady-state test methods and their aims are briefly described in Clause 4. Transient test methods are not included. For vibration testing, the environmental conditions, especially the dynamic conditions for the specimen, should be known. This standard helps to collect information about the environmental conditions (Clause 5), to estimate or measure the dynamic conditions (Clause 6) and gives examples to enable decisions to be made on the most applicable environmental vibration test method. Starting from the condition, the method of selecting the appropriate test is given. Since real life vibration conditions are dominated by vibration of a random nature, random testing should be the commonly used method, see Table 1, Clause 7. The methods included hereafter may be used to examine the vibration response of a specimen under test before, during and after vibration testing. The selection for the appropriate excitation method is described in Clause 8 and tabulated in Table 2. In this standard specification, writers will find information concerning vibration test methods and guidance for their selection. For guidance on test parameters, or severities of one of the test methods, reference should be made to the normative references.

  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-4:2001(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

IEC 60068-3-4:2001 Provides the necessary information to assist in preparing relevant specifications, such as standards for components or equipment, in order to select appropriate tests and test severities for specific products and, in some cases, specific types of application. The object of damp heat tests is to determine the ability of products to withstand the stresses occurring in a high relative humidity environment, with or without condensation, and with special regard to variations of electrical and mechanical characteristics. Damp heat tests may also be utilized to check the resistance of a specimen to some forms of corrosion attack.

  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-7:2001(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

Provides a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This standard is destined primarily for users when conducting regular chamber performance monitoring.

  • Standard
    19 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-7:2020(Main)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should');
- Table 1 has been updated.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 61340-5-1:2016(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

IEC 61340-5-1:2016 is available as IEC 61340-5-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-5-1:2016 applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V HBM, 200 V CDM and 35 V for isolated conductors. ESDS with lower withstand voltages may require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this standard. This standard provides the requirements for an ESD control program. IEC TR 61340-5-2 [9] provides guidance on the implementation of this standard. This standard does not apply to electrically initiated explosive devices, flammable liquids, gases and powders. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an ESD control program (hereinafter referred to as the "program"). This edition includes the following significant technical changes with respect to the previous edition:
a) Technical requirements were changed to align IEC 61340-5-1 with other industry ESD standards;
b) Reference documents were updated to reflect newly released IEC standards;
c) A section on product qualification was added;
d) Table 4 was deleted and detailed packaging requirements were deferred to IEC 61340-5-3;
e) Clause A.1 was removed and is now included in IEC 61340-4-6.
The contents of the corrigendum of May 2017 have been included in this copy.

  • Standard
    40 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-55:2013(Main)
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.
This publication is to be read in conjunction with IEC 60068-1:1988.

  • Standard
    38 pages
    English and French language
    sale 15% off