IEC 60286-3:2022
(Main)Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
IEC 60286-3:2022 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips). This edition includes the following significant technical changes with respect to the previous edition:
addition terms and definitions.
addition of a table of the classification to symbols concerning drive hole diameter and distance between the reel hole centre and the drive hole centre;
addition of drive hole to the reel (optional);
revision of reel hole diameter tolerances;
revision of 72 mm tape size carrier tape width dimension tolerances;
addition of Annex B (informative);
addition of component size 0201M.
Emballage de composants pour opérations automatisées - Partie 3: Emballage des composants pour montage en surface en bandes continues
L’IEC 60286-3:2022 s’applique à la mise sur bande des composants électroniques sans fils de sortie ou avec tronçons de sortie destinés à être connectés à des circuits électroniques. Elle fournit uniquement les dimensions essentielles pour la mise sur bande des composants destinés aux opérations susmentionnées. Le présent document inclut également des exigences relatives à l’emballage de produits à puce isolée incluant puces nues et puces à contact (puces retournées). Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
ajout de termes et définitions;
ajout d’un tableau de classification des symboles relatifs au diamètre du trou d’entraînement et à la distance entre le centre de l’orifice de la bobine et le centre du trou d’entraînement;
ajout du trou d’entraînement par rapport à la bobine (facultatif);
révision des tolérances du diamètre de l’orifice de la bobine;
révision des tolérances de dimension de la largeur de la bande d’entraînement de 72 mm;
ajout de l’Annexe B (informative);
ajout de la taille de composant 0201M.
General Information
Relations
Standards Content (Sample)
IEC 60286-3
®
Edition 7.0 2022-11
COMMENTED VERSION
INTERNATIONAL
STANDARD
colour
inside
Packaging of components for automatic handling –
Part 3: Packaging of surface mount components on continuous tapes
IEC 60286-3:2022-11 CMV(en)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2022 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a
Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60286-3
®
Edition 7.0 2022-11
COMMENTED VERSION
INTERNATIONAL
STANDARD
colour
inside
Packaging of components for automatic handling –
Part 3: Packaging of surface mount components on continuous tapes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.020; 31.240 ISBN 978-2-8322-6100-2
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 3 ----------------------
– 2 – IEC 60286-3:2022 CMV © IEC 2022
CONTENTS
FOREWORD .6
INTRODUCTION .8
1 Scope .9
2 Normative references .9
3 Terms, definitions and symbols.9
3.1 Terms and definitions .9
3.2 Symbols . 11
4 Structure of the specification . 13
5 Dimensional requirements for taping . 13
5.1 Component cavity positioning requirements . 13
5.1.1 Requirements for type 1a, type 1b, type 2a, type 2b and type 3. 13
5.1.2 Requirements for type 4. 13
5.2 Component cavity dimension requirements (tape type 1a, type 1b, type 2a,
type 2b and type 3) . 14
5.3 Type 1a – Punched carrier tape, with top
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.