iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 62368-2:2019

(Main)

Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1:2018

Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1:2018

IEC TR 62368-2:2019 is available as IEC TR 62368-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 62368-2:2019 provides explanatory information related to IEC 62368-1. Only those subclauses considered to need further background reference information or explanation of their content to benefit the reader are included. Therefore, not all numbered subclauses are cited. Unless otherwise noted, all references are to clauses, subclauses, annexes, figures or tables located in IEC 62368-1:2018. This third edition updates the second edition of IEC 62368-2 published in 2014 to take into account changes made to IEC 62368-1:2014 as identified in the Foreword of IEC 62368-1:2018. This Technical Report is informative only. In case of a conflict between IEC 62368-1 and IEC TR 62368-2, the requirements in IEC 62368-1 prevail over this Technical Report.
Key words: Audio/Video, Safeguards, Information, Communication

Équipements des technologies de l'audio/vidéo, de l'information et de la communication - Partie 2 : Précisions relatives à l'IEC 62368-1:2018

IEC TR 62368-2:2019 est disponible sous forme de IEC TR 62368-2:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC TR 62368-2:2019 fournit des explications au sujet de l'IEC 62368-1. Ne sont inclus que les paragraphes qui nécessitent des informations complémentaires ou des explications pouvant bénéficier au lecteur. Par conséquent, certains numéros de paragraphes ne sont pas cités. Sauf indication contraire, toutes les références à des articles, paragraphes, annexes, figures ou tableaux renvoient à l'IEC 62368-1:2018 Cette troisième édition actualise la deuxième édition de l'IEC 62368-2 publiée en 2014 et intègre les modifications faites dans l'IEC 62368-1:2014 telles qu'indiquées dans l'Avant-propos de l'IEC 62368-1:2018. Le présent Rapport technique est un document informatif. En cas de conflits entre l'IEC 62368-1 et l'IEC TR 62368-2, les exigences de l'IEC 62368-1 prévalent sur le présent Rapport technique.
Mots-clés: Audio/Vidéo, Protection, Information, Communication

General Information

Status
Published
Publication Date
06-May-2019
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
33.160.01 - Audio, video and audiovisual systems in general
35.020 - Information technology (IT) in general
Technical Committee
TC 108 - Safety of electronic equipment within the field of audio/video, information technology and communication technology
Drafting Committee
WG HBSDT - TC 108/WG HBSDT
Current Stage
PPUB - Publication issued
Start Date
26-Apr-2019
Completion Date
07-May-2019
Ref Project

Relations

Revises
IEC TR 62368-2:2015 - Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
Effective Date
05-Sep-2023

Buy Standard

IEC TR 62368-2:2019 - Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1:2018IEC TR 62368-2:2019 - Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1:2018
PreviousNext
Technical report
IEC TR 62368-2:2019 - Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1:2018
English and French language
405 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TR 62368-2
®

Edition 3.0 2019-05
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
colour
inside


Audio/video, information and communication technology equipment –
Part 2: Explanatory information related to IEC 62368-1:2018

Équipements des technologies de l'audio/vidéo, de l'information
et de la communication –
Partie 2: Précisions relatives à l'IEC 62368-1:2018

IEC TR 62368-2:2019-05(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2019 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,
webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en
La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues
en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire
comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.

projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary
IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais
Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et Définitions des
Published détaille les nouvelles publications parues. publications IEC parues depuis 2002. Plus certaines entrées
Disponible en ligne et une fois par mois par email. antérieures extraites de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62368-1:2018(Main)
Audio/video, information and communication technology equipment - Part 1: Safety requirements

IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This document does not include requirements for performance or functional characteristics of equipment.
This is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards.
The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– addition of requirements for outdoor equipment;
– new requirements for optical radiation;
– addition of requirements for insulating liquids;
– addition of requirements for work cells;
– addition of requirements for wireless power transmitters;
– addition of requirements for fully insulated winding wire (FIW);
– alternative method for determination of top, bottom and side openings for fire enclosures;
– alternative requirements for sound pressure.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
The contents of the corrigendum of April 2020 have been included in this copy.
Key words: Audio, Video, Communication, Safety

  • Standard
    775 pages
    English and French language
    sale 15% off
IEC
IEC 62368-3:2017(Main)
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports

IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD).
The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3.
Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery.
This International Standard is to be used in conjunction with IEC 62368-1:2014.
It has the status of a group safety publication in accordance with IEC Guide 104.
The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.

  • Standard
    51 pages
    English and French language
    sale 15% off
IEC
IEC 62911:2016(Main)
Audio, video and information technology equipment - Routine electrical safety testing in production

IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test

  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC 62368-1:2018(Main)
Audio/video, information and communication technology equipment - Part 1: Safety requirements

IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This document does not include requirements for performance or functional characteristics of equipment.
This is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards.
The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– addition of requirements for outdoor equipment;
– new requirements for optical radiation;
– addition of requirements for insulating liquids;
– addition of requirements for work cells;
– addition of requirements for wireless power transmitters;
– addition of requirements for fully insulated winding wire (FIW);
– alternative method for determination of top, bottom and side openings for fire enclosures;
– alternative requirements for sound pressure.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
The contents of the corrigendum of April 2020 have been included in this copy.
Key words: Audio, Video, Communication, Safety

  • Standard
    775 pages
    English and French language
    sale 15% off
IEC
IEC 62368-3:2017(Main)
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports

IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD).
The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3.
Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery.
This International Standard is to be used in conjunction with IEC 62368-1:2014.
It has the status of a group safety publication in accordance with IEC Guide 104.
The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.

  • Standard
    51 pages
    English and French language
    sale 15% off
IEC
IEC 62911:2016(Main)
Audio, video and information technology equipment - Routine electrical safety testing in production

IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test

  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC 62386-104:2019/AMD1:2023(Amendment)
Amendment 1 - Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components
  • Standard
    6 pages
    English and French language
    sale 15% off
IEC
IEC 61851-24:2023(Main)
Electric vehicle conductive charging system - Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging

IEC 61851-24:2023, together with IEC 61851-23, applies to digital communication between a DC EV supply equipment and an electric road vehicle (EV) for control of conductive DC power transfer, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 500 V DC.
This document also applies to digital communication between the DC EV charging/discharging station and the EV for system A, as specified in Annex A.
The EV charging mode is mode 4, according to IEC 61851-23.
Annex A, Annex B, and Annex C give descriptions of digital communications for control of DC charging specific to DC EV charging systems A, B and C as defined in IEC 61851-23.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Annex A and Annex B have been updated in line with IEC 61851-23:2023 and relevant standards.

  • Standard
    105 pages
    English and French language
    sale 15% off
IEC
IEC 61851-23:2023(Main)
Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment

IEC 61851-23:2023 applies to the EV supply equipment to provide energy transfer between the supply network and electric vehicles (EVs), with a rated maximum voltage at side A of up to 1 000 V AC or up to 1 500 V DC and a rated maximum voltage at side B up to 1 500 V DC.
This document specifies the EV supply equipment of system A, system B and system C as defined in Annex AA, Annex BB and Annex CC. Other systems are under consideration.
This document provides the requirements for bidirectional power transfer (BPT) EV supply equipment for system A, with a rated maximum voltage at side A up to 1 000 V AC or 1 500 V DC. The requirements for reverse power transfer (RPT) and BPT for system B and system C are under consideration and are not specified in this document.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the structure has been rearranged according to IEC 61851-1:2017;
b) electrical safety requirements in Clause 8 and Clause 12 have been revised based on the requirements in IEC 62477-1 and inspired by the hazard based safety approach of IEC 62368-1;
c) test methods for checking conformity to the stated requirements have been mostly added; general provisions for compliance tests have been specified in Clause 102;
d) specific requirements and/or information for the following functions have been added: energy transfer with thermal management system (101.2), bi-directional power transfer control (Annex DD), multi- side B separated EV supply equipment (Annex FF), and communication and energy transfer process (Annex GG);
e) Annex AA (system A), Annex BB (system B) and Annex CC (system C) have been updated including additions in conjunction with b) and c). This document has been limited to be applicable to system A, system B and system C;
f) the former Annex DD and Annex EE have been deleted. A new Annex EE, with the requirements for the artificial test load, has been added.
g) a new informative annex for the touch current and the touch impulse current (Annex HH) has been added

  • Standard
    383 pages
    English language
    sale 15% off
IEC
IEC 62977-2-11:2023(Main)
Electronic displays - Part 2-11: Measurement of optical characteristics - Local luminance and uniformity

IEC 62977-2-11:2023 specifies the local luminance and uniformity measurement methods of emissive displays. The light measuring device’s (LMD) measurement field will cover more than 500 pixels of TVs, monitors or signage displays. The local luminance and uniformity measurement methods identify optical variations within the local block where over 500 emission pixels are regularly placed.

  • Standard
    20 pages
    English language
    sale 15% off