iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TS 62239-2:2017

(Main)

Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan

Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan

IEC TS 62239-2:2017(E) applies to the development of COTS assembly management plans for the integration and management of electronic COTS assemblies in electronic systems used in the ADHP markets where reliability is generally critical. Depending on program or product line requirements and/or the technical characteristics of the electronic COTS assemblies and in agreement with the customer, the electronic COTS assembly management plans could consider tailoring the requirements of this document. Although developed for the avionics industry, this document can be applied by other high performance and high reliability industries at their discretion.

General Information

Status
Published
Publication Date
20-Feb-2017
ICS
03.100.50 - Production. Production management
31.020 - Electronic components in general
49.060 - Aerospace electric equipment and systems
Technical Committee
TC 107 - Process management for avionics
Drafting Committee
WG 5 - TC 107/WG 5
Current Stage
PPUB - Publication issued
Start Date
16-Feb-2017
Completion Date
21-Feb-2017
Ref Project

Buy Standard

IEC TS 62239-2:2017 - Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management planIEC TS 62239-2:2017 - Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
PreviousNext
Technical specification
IEC TS 62239-2:2017 - Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
English language
64 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TS 62239-2
®

Edition 1.0 2017-02
TECHNICAL
SPECIFICATION



Process management for avionics – Management plan –
Part 2: Preparation and maintenance of an electronic COTS assembly
management plan
IEC TS 62239-2:2017-02(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC TS 62239-2

®


Edition 1.0 2017-02




TECHNICAL



SPECIFICATION



















Process management for avionics – Management plan –

Part 2: Preparation and maintenance of an electronic COTS assembly

management plan


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 03.100.50; 31.020; 49.060 ISBN 978-2-8322-3905-6



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC TS 62239-2:2017  IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions. 8
3.2 Abbreviated terms . 14
4 Technical requirements . 15
4.1 General . 15
4.2 COTS assembly selection .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC TR 62396-8:2020(Main)
Process management for avionics - Atmospheric radiation effects - Part 8: Proton, electron, pion, muon, alpha-ray fluxes and single event effects in avionics electronic equipment - Awareness guidelines

IEC 62396-8:2020 is intended to provide awareness and guidance with regard to the effects of small particles (that is, protons, electrons, pions and muon fluxes) and single event effects on avionics electronics used in aircraft operating at altitudes up to 60 000 feet (18 300 m). This is an emerging topic and lacks substantive supporting data. This document is intended to help aerospace or ground level electronic equipment manufacturers and designers by providing awareness guidance for this new emerging topic.
Details of the radiation environment are provided together with identification of potential problems caused as a result of the atmospheric radiation received. Appropriate methods are given for quantifying single event effect (SEE) rates in electronic components.

  • Technical report
    59 pages
    English language
    sale 15% off
IEC
IEC TS 62686-1:2020(Main)
Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors

IEC TS 62686-1:2020 is available as IEC TS 62686-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TS 62686-1:2020 defines the minimum requirements for general purpose "off the shelf" COTS (commercial off-the-shelf) integrated circuits and discrete semiconductors for ADHP (aerospace, defence and high performance) applications. This Technical Specification applies to all components that can be operated in ADHP applications within the manufacturers' publicly available data sheet limits in conjunction with IEC TS 62239-1. It may be used by other high performance and high reliability industries, at their discretion. This new edition includes the following significant technical changes with respect to the previous edition:
- update related to obsolescence of STACK Specification S/0001 revision 14 notice 3;
- addition of alternative automotive methods of compliance and revision of Annex B initially related to cross-reference to STACK Specification S/0001;
- addition of an Annex C to include a requirement matrix for IEC TS 62686-1 verification.

  • Technical specification
    83 pages
    English language
    sale 15% off
IEC
IEC 62668-1:2019(Main)
Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components

IEC 62668-1:2019 defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised distributor networks are considered in IEC 62668-2. Although developed for the avionics industry, this document can be applied by other high performance and high reliability industries at their discretion.
This first edition cancels and replaces the third edition of IEC TS 62668-1 published in 2016. This edition includes the following significant technical changes with respect to the previous edition:
a) added a reference to AS/EN/JISQ 9100 and AS/EN/JISQ 9110 which contain anti-counterfeit requirements
b) added reference to USA DFAR rule 252.246.7008 and to UK Defence Standard 05-135;
c) added reference to more GAO, OECD and ICC reports
d) updated weblinks and other references;
e) added new Annex E with figures describing how anti-counterfeit documents can be used in supply chains;
f) added a reference to the new IECQ OD 3702 traceability audit;
g) added new definition for re-manufactured components with a warning that these are not recommended.

  • Standard
    183 pages
    English and French language
    sale 15% off
IEC
IEC TR 63238-1:2019(Main)
Process management for avionics - Electronics design - Part 1: Electrical signal properties, naming conventions and interface control document (ICD)

IEC TR 63238-1:2019 provides information and a template to create an interface control document (ICD) for any project which includes electronic assemblies, such as electronic circuit card assemblies (CCAs) or electronic devices, connected together. This document proposes electrical signal naming conventions when interfacing electronic assemblies, and an example containing seven signal naming conventions is included. This document supports original equipment manufacturers (OEMs) in the preparation and maintenance of their electronic assemblies interfaces and integration specifications to avoid misunderstanding of signals which can cause unnecessary design and/or integration errors, and testing complications.

  • Technical report
    15 pages
    English language
    sale 15% off
IEC
IEC 62668-2:2019(Main)
Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources

IEC 62668-2:2019, defines requirements for avoiding the use of counterfeit, recycled and fraudulent components when these components are not purchased from the original component manufacturer (OCM) or are purchased from outside of franchised distributor networks for use in the aerospace, defence and high performance (ADHP) industries. This practice is used, as derogation, only when there are no reasonable or practical alternatives.
NOTE: Typically this document is used in conjunction with IEC 62239-1 and IEC 62668-1, enabling ADHP industries to manage and avoid the use of counterfeit, recycled and fraudulent components in their supply chains.
Although developed for the ADHP industry, this document can be used by other high-performance and high-reliability industries, at their discretion.
This first edition cancels and replaces the second edition of IEC TS 62668-2 published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the second edition of IEC TS 62668-2:
a) updates to the risk assessment process, including reference to SAE AS6081;
b) updates to the test methods, including reference to the SAE AS6171 test methods published and in development;
c) updates in line with IEC 62668-1 for definitions and references to DFARS.

  • Standard
    116 pages
    English and French language
    sale 15% off
IEC
IEC TS 62686-2:2019(Main)
Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components

IEC TS 62686-2:2019 defines the minimum requirements for general purpose "off-the-shelf" COTS (commercial off-the-shelf) passive components for aerospace, defence and high performance (ADHP) applications. This document applies to all passive components that can be operated in ADHP applications within the manufacturers’ publicly available data sheet limits in conjunction with IEC TS 62239-1. This document can be used by other high performance and high reliability industries, at their discretion.
ADHP application requirements are not necessarily fulfilled by this document alone. ADHP original equipment manufacturers (OEMs) could consider redesigning their products or conducting further testing to verify suitability in ADHP applications using their procedures for satisfying their electronic component management plan (ECMP) (see IEC TS 62239-1).
This first edition cancels and replaces IEC PAS 62686-2 published in 2016.

  • Technical specification
    59 pages
    English language
    sale 15% off
IEC
IEC 62239-1:2018(Main)
Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan

IEC 62239-1:2018 defines the requirements for developing an electronic components management plan (ECMP) to guarantee to customers that all of the electronic components in the equipment of the plan owner are selected and applied in controlled processes compatible with the end application and that the technical requirements detailed in Clause 4 are accomplished. In general, the plan owner of a complete electronic components management plan (ECMP) is the avionics original equipment manufacturer (OEM).
This first edition cancels and replaces IEC TS 62239-1 published in 2015. This edition includes the following significant technical changes with respect to the previous edition:
a) added references to SAE EIA-STD-4899, IECQ OD 3702, IECQ OD 3407-1, IEC TR 62240-2, IECQ component schemes, SAE AS6081, SAE AS6171. GEIA-STD-0005-1 GEIA STD 0008;
b) replaced Annex C (which was transferred into IEC TR 62240-2) with a cross-reference table to SAE EIASTD4899 rev C clauses/ subclauses for guidance purposes only;
c) added the analysis of component technical erratum
d) updated Bibliography and reference documents

  • Standard
    159 pages
    English and French language
    sale 15% off
IEC
IEC TR 62240-2:2018(Main)
Process management for avionics - Electronic components capability in operation - Part 2: Semiconductor microcircuit lifetime

IEC TR 62240-2:2018(E) describes a process and a method for selecting digital semiconductor microcircuits by ensuring that their lifetime is compatible with the requirements of aerospace, defence and high performance (ADHP) applications (generally in connection with functional environments). Methods and guidelines are provided to assess the long term reliability of COTS semiconductor microcircuits in such applications; they mainly apply during the electronic design phase when selecting semiconductor microcircuits and assessing the application reliability. focuses on original equipment manufacturers (OEMs) using commercial off the shelf (COTS) semiconductor microcircuits for high performance, high reliability and long duration applications. This document supports OEMs in the preparation and maintenance of their semiconductor electronic component management plan (ECMP).

  • Technical report
    28 pages
    English language
    sale 15% off
IEC
IEC TS 62647-4:2018(Main)
Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 4: Ball grid array (BGA) re-balling

IEC TS 62647-4:2018(E) defines the requirements for replacing solder balls on ball grid array (BGA) component packages in the context of an electronic components management plan (ECMP) for aerospace, defence and high reliability products. The intent of this document is to provide re-balling companies (hereinafter referred to as the re-balling provider) with the administrative and technical requirements to be incorporated within existing processes or for establishing, implementing and maintaining a new set of processes or the creation of a stand-alone re-balling process.

  • Technical specification
    41 pages
    English language
    sale 15% off
IEC
IEC TR 62240-1:2018(Main)
Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating

IEC TR 62240-1:2018 is available as IEC TR 62240-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 62240-1:2018 is a technical report, which provides information when using semiconductor devices in wider temperature ranges than those specified by the device manufacturer. The uprating solutions described herein are considered exceptions, when no reasonable alternatives are available; otherwise devices are utilized within the manufacturers’ specifications. This document describes the methods and processes for implementing this special case of thermal uprating. All of the elements of these methods and processes employ existing, commonly used best engineering practices. No new or unique engineering knowledge is needed to follow these processes, only a rigorous application of the overall approach. The terms “uprating” and “thermal uprating” are being used increasingly in avionics industry discussions and meetings, and clear definitions are included in the present IEC Technical Report. They were coined as shorthand references to a special case of methods commonly used in selecting electronic components for circuit design. This new edition cancels and replaces the first edition published in 2013 and includes a revised wording for subclause 4.1 (Introduction to selection provisions) and the associated flowchart.

  • Technical report
    55 pages
    English language
    sale 15% off