IEC PAS 63267-3-30:2021

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-30: End face geometry - Angled PC end face PPS rectangular ferrule multimode A1b fibres

IEC PAS 63267-3-30:2021 which is a publicly available specification, certain dimensional limits of an 16F MM angled PC rectangular polyphenylene sulphide (PPS) ferrule optical interface in order to meet specific longitudinal offset requirements for fibre-to-fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, OP, OP+, I and E as defined in IEC 61753‑1. Ferrule interface dimensions and features are contained in IEC 61754 (all parts), which deals with fibre optic connector interfaces.

General Information

• Status: Published
• Publication Date: 26-May-2021
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: SC 86B - Fibre optic interconnecting devices and passive components
• Current Stage: PPUB - Publication issued
• Start Date: 11-Jun-2021
• Completion Date: 27-May-2021

Standards Content (Sample)

IEC PAS 63267-3-30
®

Edition 1.0 2021-05
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD


Fibre optic interconnecting devices and passive components – Fibre optic
connector optical interfaces –
Part 3-30: End face geometry – Angled PC end face PPS rectangular ferrule
multimode A1b fibres

IEC PAS 63267-3-30:2021-05(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2021 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].

---------------------- Page: 2 ----------------------
IEC PAS 63267-3-30

®


Edition 1.0 2021-05




PUBLICLY AVAILABLE



SPECIFICATION




PRE-STANDARD















Fibre optic interconnecting devices and passive components – Fibre optic

connector optical interfaces –

Part 3-30: End face geometry – Angled PC end face PPS rectangular ferrule

multimode A1b fibres
























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.20 ISBN 978-2-8322-9837-4




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC 63267-3-30:2021  IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
5 Interface parameters . 6
Annex A (normative) Minus coplanarity . 10
Bibliography . 11

Figure 1 – Fibre numbering conventions . 7
Figure 2 – Interface dimensions related to longitudinal offset . 7
Figure A.1 – Illustration of fibre line and minus coplanarity parameters .
...