Textiles -- Test methods for evaluating the electrostatic propensity of fabrics -- Part 3: Test method using manual friction

ISO 18080-3:2015 specifies a test method using manual friction with measurement of frictional charge density on specimens of fabric. The test method is suitable for fabrics of all types of composition and construction that are capable of withstanding frictional charging. Some fabrics, e.g. fabrics of low strength or loose construction, may not be physically capable of withstanding the manual friction used in this test method or may give false results. In such cases, the test method described in ISO 18080-1 can be used to evaluate electrostatic propensity. The test method described may not be suitable for evaluating garments and garment materials in relation to safety of personnel and protection of electrostatic discharge sensitive devices.

General Information

Status
Published
Publication Date
10-Dec-2015
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
31-Dec-2015
Completion Date
14-Dec-2015
Ref Project

Buy Standard

Standard
ISO 18080-3:2015 - Textiles -- Test methods for evaluating the electrostatic propensity of fabrics -- Part 3: Test method using manual friction
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18080-3
First edition
2015-12-15
Textiles — Test methods for
evaluating the electrostatic
propensity of fabrics —
Part 3:
Test method using manual friction
Textiles — Méthodes d’essai pour l’évaluation de la propension des
étoffes électrostatique —
Partie 3: Méthode d’essai de friction manuelle
Reference number
ISO 18080-3:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 18080-3:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18080-3:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Conditioning and testing atmosphere . 2
6 Apparatus . 2
7 Preparation of specimen . 5
7.1 Sampling . 5
7.2 Cleansing . 5
7.2.1 General. 5
7.2.2 Wash by water . 5
7.2.3 Dry cleaning . 5
7.3 Conditioning of sample . 5
8 Testing method . 5
9 Test report . 9
Annex A (informative) Round robin test results .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.