iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

ISO/IEC 15045-2:2012

(Main)

Information technology - Home electronic system (HES) gateway - Part 2: Modularity and protocol

Information technology - Home electronic system (HES) gateway - Part 2: Modularity and protocol

ISO/IEC 15045-2:2012(E) specifies a gateway architecture that provides an interconnection between one or more Wide Area Networks (WANs) and one or more Home Area Networks (HANs). It is not needed for a "simple gateway" linking one WAN to one HAN where there is no intention of future expansion. It applies to a "distributed gateway," and is also referred to in ISO/IEC 15045-1 as the Complex Modular Gateway. Also, it specifies how separate gateways in a single house can interoperate to provide co-ordinated functions.

General Information

Status
Published
Publication Date
04-Jul-2012
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
35.200 - Interface and interconnection equipment
Technical Committee
ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
Drafting Committee
WG 1 - ISO/IEC JTC 1/SC 25/WG 1
Current Stage
PPUB - Publication issued
Start Date
15-Aug-2012
Completion Date
05-Jul-2012
Ref Project

Buy Standard

ISO/IEC 15045-2:2012 - Information technology - Home electronic system (HES) gateway - Part 2: Modularity and protocolISO/IEC 15045-2:2012 - Information technology - Home electronic system (HES) gateway - Part 2: Modularity and protocol
PreviousNext
Standard
ISO/IEC 15045-2:2012 - Information technology - Home electronic system (HES) gateway - Part 2: Modularity and protocol
English language
30 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ISO/IEC 15045-2
Edition 1.0 2012-07
INTERNATIONAL
STANDARD

colour
inside


Information technology – Home electronic system (HES) gateway –
Part 2: Modularity and protocol

ISO/IEC 15045-2:2012(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2012 ISO/IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about ISO/IEC copyright or have an enquiry about obtaining additional rights to this
publication, please contact the address below or your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

---------------------- Page: 2 ----------------------
ISO/IEC 15045-2


Edition 1.0 2012-07




INTERNATIONAL



STANDARD








colour

inside










Information technology – Home electronic system (HES) gateway –

Part 2: Modularity and protocol



























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
P


ICS 35.200 ISBN 978-2-83220-190-9



  Warning! Make sure that you obtained this publication from an authorized distributor.

---------------------- Page: 3 ----------------------
– 2 – 15045-2 © ISO/IEC:2012(E)
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 11
4 Conformance . 12
5 Architecture . 12
5.1 Architectural model . 12
5.2 Design philosophy . 14
5.2.1 General approach . 14
5.2.2 Distributed gateway system (DGS) . 14
5.2.3 Modularity . 15
5.2.4 Common interoperability platform . 15
6 Modularity requ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
ISO/IEC TR 15067-3-8:2020(Main)
Information technology - Home electronic system (HES) application model - Part 3-8: GridWise transactive energy framework

ISO/IEC TR 15067-3-8:2020 (E), which is a Technical Report, provides a conceptual framework for developing architectures and designing solutions related to transactive energy (TE). Transactive energy allows electricity generated locally by consumers using wind, solar, storage, etc., at homes or buildings to be sold into a competitive market. This document provides guidance for enhancing interoperability among distributed energy resources involved in energy management systems at homes and buildings. It addresses gaps identified as problematic for the industry by providing definitions of terms, architectural principles and guidelines, and other descriptive elements that present a common ground for all interested parties to discuss and advance TE. This document builds upon ISO/IEC 15067-3, with technology to accommodate a market for buying and selling electricity generated centrally or locally by consumers. The energy management agent (EMA) specified in ISO/IEC 15067-3 can represent the customer as a participant in TE. Transactive energy is important for achieving electric grid stability as power from renewable sources such as wind and solar fluctuates with time and weather.

  • Technical report
    74 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 15067-3-7:2020(Main)
Information technology - Home electronic system (HES) application model - GridWise transactive energy systems research, development and deployment roadmap

ISO/IEC TR 15067-3-7:2020 (E), which is a Technical Report, explains the organization and structure of the transactive energy systems research, development, and deployment roadmap.

  • Technical report
    34 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 11801-9910:2020(Main)
Information technology ‑ Generic cabling for customer premises - Part 9910: Specifications for modular plug terminated link cabling

ISO/IEC TR 11801-9910:2020, which is a Technical Report, provides definitions for, and examples of, modular plug terminated link configurations.
This document provides performance specifications for Classes D, E, EA, F, FA, I and II modular plug terminated links.
Test methods are provided in Clause 8 and are specified in ISO/IEC 14763-4

  • Technical report
    12 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 11801-9909:2020(Main)
Information technology ‑ Generic cabling for customer premises - Part 9909: Evaluation of balanced cabling in support of 25 Gbit/s for reach greater than 30 metres

ISO/IEC TR 11801-9909:2020, which is a Technical Report, covers evaluation and recommendations for achieving extended reach, greater than 30 m, for 25 Gbit/s applications over balanced cabling channels.
This document covers channel reference implementations, based on Category 8.1 and Category 8.2, 2 000 MHz, components.
The channel and component category specifications covered in this document are not intended to be normative.

  • Technical report
    21 pages
    English language
    sale 15% off
IEC
ISO/IEC TS 29125:2017/AMD1:2020(Amendment)
Amendment 1 - Information technology - Telecommunications cabling requirements for remote powering of terminal equipment
  • Technical specification
    11 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 11801-9908:2020(Main)
Information technology - Generic cabling for customer premises - Part 9908: Guidance for the support of higher speed applications over optical fibre channels

ISO/IEC TR 11801-9908:2020 (E) which is a Technical Report, provides a listing of the data centre application options currently available or in process of standardization utilizing duplex and parallel optical fibre channels. It also identifies migration considerations when upgrading to higher speed applications.

  • Technical report
    15 pages
    English language
    sale 15% off
IEC
ISO/IEC 60559:2020(Main)
Floating-point arithmetic

ISO/IEC 60559:2020(E) specifies formats and methods for floating-point arithmetic in computer systems - standard and extended functions with single, double, extended, and extendable precision - and recommends formats for data interchange. Exception conditions are defined and standard handling of these conditions is specified. It provides a method for computation with floating-point numbers that will yield the same result whether the processing is done in hardware, software, or a combination of the two. The results of the computation will be identical, independent of implementation, given the same input data. Errors, and error conditions, in the mathematical processing will be reported in a consistent manner regardless of implementation. This second edition, published as ISO/IEC 60559, replaces the first edition ISO/IEC/IEEE 60559:2011.

  • Standard
    84 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 11801-9906:2020(Main)
Information technology - Generic cabling for customer premises - Part 9906: Balanced 1-pair cabling channels up to 600 MHz for single pair Ethernet (SPE)

ISO/IEC TR 11801-9906:2020(E) covers channel specifications, for channels constructed from balanced 1 pair cabling components, primarily intended for use in industrial automation and process control applications.
The channel specifications are consistent with corresponding IEEE 802.3 single-pair Ethernet (SPE) applications and are referenced from link segment specifications in the following IEEE SPE physical layer specifications:
• ISO/IEC/IEEE 8802-3:2017/AMD4, 1 000 Mb/s: 1000BASE T1 Type A, ≤ 15 m, 1000BASE T1 Type B, ≤ 40 m;
• ISO/IEC/IEEE 8802-3:2017/AMD1, 100 Mb/s: 100BASE T1, ≤ 15 m;
• IEEE 802.3cg, 10 Mb/s: 10BASE T1S, ≤ 15 m; 10BASE T1L, ≤ 1 000 m.
The channel component specifications are referenced according to corresponding IEC balanced 1 pair cable and connector specifications.
Channel specifications include IL, RL, TCL, coupling attenuation, and alien crosstalk parameters specifications.
Channel EMC related specifications include electromagnetic isolation levels E1, E2 and E3, which are defined according to the MICE standard environmental characterization system specified in ISO/IEC 11801-1

  • Technical report
    38 pages
    English language
    sale 15% off
IEC
ISO/IEC 14763-2:2019(Main)
Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation

ISO/IEC 14763-2:2019 specifies requirements for the planning, installation and operation of telecommunications cabling and cabling infrastructures including cabling, pathways, spaces and telecommunications bonds (other than that specified in ISO/IEC 30129) in support of generic cabling standards and associated documents. The following aspects are addressed: a) specification of the installation; b) quality assurance; c) installation planning; d) installation practice; e) documentation; f) administration; g) testing; h) inspection; i) operation; j) maintenance; k) repair. The requirements and recommendations of Clauses 5 to 14 are premises-independent. Annexes C through G contain premises-specific amendments of and additions to these requirements and recommendations. In addition, this document describes the methodology for the assessment of spaces, pathways, pathway systems and cabling (either installed or planned) in support of remote powering objectives. This document excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems may have on the installation of telecommunications cabling (and vice versa) and gives general advice. This document excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite). This document is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances (e.g. electricity supply and electrified railways). Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations. This second edition includes the following significant technical changes with respect to the previous edition: the inclusion of planning and installation practices to support remote powering over the telecommunications cabling infrastructure and the inclusion of planning and installation practices outside buildings.

  • Standard
    175 pages
    English language
    sale 15% off
IEC
ISO/IEC 14776-481:2019(Main)
Information technology - Small computer system interface (SCSI) - Part 481: Security features for SCSI commands (SFSC)

ISO/IEC 14776-481:2019 defines a device model that is applicable to all SCSI devices. Other command standards expand on the general SCSI device model in ways appropriate to specific types of SCSI devices. ISO/IEC 14776 (all parts) specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This document is a functional description. Conforming implementations employ any design technique that does not violate interoperability. This document defines security features for use by all SCSI devices. This document defines the security model that is basic to every device model and the parameter data that applies to any device model. For additional information on the security goals and threat model discussed in this document see Annex A.

  • Standard
    143 pages
    English language
    sale 15% off