Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

Amendement 1 - Dispositifs différentiels résiduels (DDR) pour usages domestique et analogues - Compatibilité électromagnétique

General Information

Status
Published
Publication Date
26-Aug-2004
Current Stage
DELPUB - Deleted Publication
Completion Date
28-Oct-2022
Ref Project

Relations

Buy Standard

Standard
IEC 61543:1995/AMD1:2004 - Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
English and French language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME CEI

INTERNATIONALE IEC



61543
INTERNATIONAL


1995
STANDARD


AMENDEMENT 1
AMENDMENT 1

2004-08

Amendement 1
Dispositifs différentiels résiduels (DDR)
pour usages domestique et analogues –
Compatibilité électromagnétique


Amendment 1
Residual current-operated protective devices
(RCDs) for household and similar use –
Electromagnetic compatibility

© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale G
PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 1 ----------------------
– 2 – 61543 Amend. 1 © CEI:2004
AVANT-PROPOS
Cet amendement a été préparé par le sous-comité 23E: Disjoncteurs et appareillage similaire
pour usage domestique, du comité 23 de la CEI: Petit appareillage.
Le texte de cet amendement est basé sur les documents suivants:
FDIS Rapport de vote
23E/546/FDIS 23E/554/RVD

Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l’approbation de cet amendement.
Le comité a décidé que le contenu de cet amendement et de la publication de base ne sera
pas modifié avant la date de maintenance indiquée sur le site web de la CEI sous
"http://webstore.iec.ch" dans les données relatives à la publication recherchée. A cette date,
la publication sera
• reconduite,
• supprimée,
• remplacée par une édition révisée, ou
• amendée.
⎯⎯⎯⎯⎯⎯⎯

Page 4
INTRODUCTION
Ajouter, après le dernier alinéa, le nouvel alinéa suivant:
Les caractéristiques CEM des produits sont généralement influencées par la conception et
non par le processus de fabrication, c’est pourquoi les essais de la présente norme sont à
faire pour la vérification de la conception et seront refaits seulement dans le cas de
modifications influençant le comportement en CEM.

Page 6
2 Références normatives
Remplacer le texte introductif des références normatives par le nouveau texte suivant :
Les documents de référence suivants sont indispensables pour l'application du présent
document. Pour les références datées, seule l'édition citée s'applique. Pour les références
non datées, la dernière édition du document de référence s'applique (y compris les éventuels
amendements).
Ajouter, à la liste existante, les nouvelles références suivantes:
CEI 61000-4-3, Compatibilité électromagnétique (CEM) – Partie 4-3: Techniques d'essai et de
mesure – Essai d'immunité aux champs électromagnétiques rayonnés aux fréquences
radioélectriques

---------------------- Page: 2 ----------------------
61543 Amend. 1 © IEC: 2004 – 3 –
FOREWORD
This amendment has been prepared by subcommittee 23E: Circuit-breakers and similar
equipment for household use, of IEC technical committee 23: Electrical accessories.
The text of this amendment is based on the following documents:
FDIS Report on voting
23E/546/FDIS 23E/554/RVD

Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________


Page 5

INTRODUCTION
Add, after the last paragraph, the following new paragraph:
The EMC characteristics of a product are generally influenced by the design and not by the
manufacturing process, therefore the tests of this standard are to be made for design
verification and will be repeated only in the case of modifications influencing the EMC
behaviour.

Page 7
2 Normative references
Replace the introductory paragraph to the normative references by the following text:
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
Add, to the existing list, the following new references:
IEC 61000-4-3, Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement
techniques – Radiated, radio-frequency, electromagnetic field immunity test

---------------------- Page: 3 ----------------------
– 4 – 61543 Amend. 1 © CEI:2004
CEI 61000-4-5:1995, Compatibilité électromagnétique (CEM) – Partie 4: Techniques d'essai
et de mesure – Section 5: Essai d'immunité aux ondes de choc

CEI 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.