Systems and software engineering — Content of life-cycle information items (documentation)

ISO/IEC/IEEE 15289:2015 provides requirements for identifying and planning the specific information items (information products, documentation) to be developed and revised during systems and software life cycles and service processes. It specifies the purpose and content of all identified systems and software data records and life-cycle information items, as well as records and information items for information technology service management. The information item contents are defined according to generic document types (description, plan, policy, procedure, report, request, and specification) and the specific purpose of the document. For simplicity of reference, each information item is described as if it were published as a separate document. However, information items may be unpublished but available in a repository for reference, divided into separate documents or volumes, or combined with other information items into one document. ISO/IEC/IEEE 15289:2014 is based on the life-cycle processes specified in ISO/IEC 12207:2008 (IEEE Std 12207-2008) and ISO/IEC 15288:2008 (IEEE Std 15288-2008), and the service management processes specified in ISO/IEC 20000-1:2011 (IEEE Std 20000-1:2013) and ISO/IEC 20000-2:2012 (IEEE Std 20000-2:2013).

Ingénierie des systèmes et du logiciel — Contenu des articles d'information du cycle de vie (documentation)

General Information

Status
Withdrawn
Publication Date
20-May-2015
Withdrawal Date
20-May-2015
Current Stage
9599 - Withdrawal of International Standard
Completion Date
01-Jun-2017
Ref Project

Relations

Buy Standard

Standard
ISO/IEC/IEEE 15289:2015 - Systems and software engineering -- Content of life-cycle information items (documentation)
English language
84 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
15289
Second edition
2015-05-15

Systems and software engineering —
Content of life-cycle information items
(documentation)
Ingénierie des systèmes et du logiciel — Contenu des articles
d'information du cycle de vie (documentation)




Reference number
ISO/IEC/IEEE 15289:2015(E)
©
ISO/IEC 2015
©
IEEE 2015

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 15289:2015(E)

PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat,
the IEC Central Office and IEEE do not accept any liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies
and IEEE members. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat or IEEE at the
address given below.













COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2015
©  IEEE 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from ISO, IEC or IEEE at the respective
address below.
ISO copyright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 3, rue de Varembé 3 Park Avenue, New York
CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA
Tel. + 41 22 749 01 11 Switzerland E-mail stds.ipr@ieee.org
Fax + 41 22 749 09 47 E-mail inmail@iec.ch Web www.ieee.org
E-mail copyright@iso.org Web www.iec.ch
Web www.iso.org
Published in Switzerland

© ISO/IEC 2015 – All rights reserved
ii © IEEE 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 15289:2015(E)
Contents Page
Foreword . vi
Introduction . vii
1 Scope . 1
2 Applicability . 2
2.1 Purpose . 2
2.2 Intended users of this International Standard . 3
2.3 Applicability to work efforts . 3
2.4 Applicability to information item audiences . 3
3 Conformance . 4
3.1 Definition of conformance . 4
3.2 Conformance situations . 4
3.3 Type of conformance . 5
4 Normative references . 5
5 Terms and definitions . 5
6 Life-cycle data and information items . 8
6.1 Life-cycle data characteristics . 8
6.2 Records compared to information items (documents) . 9
6.3 Management of life-cycle data (records) . 9
6.4 Management of information items (documents) . 9
6.4.1 Developing the documentation plan . 10
6.4.2 Managing and controlling information items . 10
7 Generic types of information items . 10
7.1 General . 10
7.2 Description – generic content . 11
7.3 Plan – generic content . 11
7.4 Policy – generic content . 13
7.5 Procedure – generic content . 13
7.6 Report – generic content . 14
7.7 Request – generic content . 15
7.8 Specification – generic content . 15
8 Mapping of information items to the life cycle and service management processes . 16
8.1 Mapping of information items to the system life cycle . 16
8.2 Mapping of information items to the software life cycle . 20
8.3 Mapping of information items to the service management processes . 29
9 Records . 35
9.1 Record – generic content . 35
9.2 Specific record contents . 36
10 Specific information item (document) contents . 40
10.1 General . 40
10.2 Acceptance plan . 41
10.3 Acceptance review and testing report . 41
10.4 Acquisition plan . 41
10.5 Asset management plan . 42
10.6 Audit acknowledgement report . 42
10.7 Audit plan . 42
© ISO/IEC 2015 – All rights reserved
© IEEE 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC/IEEE 15289:2015(E)

10.8 Audit procedure .42
10.9 Audit report .42
10.10 Capacity plan .43
10.11 Capacity management procedure .43
10.12 Change request .43
10.13 Communication procedure.44
10.14 Complaint procedure .44
10.15 Concept of operations .44
10.16 Configuration management plan and policy .45
10.17 Configuration management procedure .46
10.18 Configuration status report .46
10.19 Contract .47
10.20 Customer satisfaction survey .47
10.21 Database design description .47
10.22 Development plan .48
10.23 Disposal plan .49
10.24 Documentation plan .49
10.25 Documentation procedure .49
10.26 Domain engineering plan .50
10.27 Evaluation report .50
10.28 Implementation procedure .50
10.29 Improvement plan .50
10.30 Improvement procedure .51
10.31 Incident management procedure .51
10.32 Incident report .52
10.33 Information management plan .52
10.34 Information management procedure .53
10.35 Information security plan .53
10.36 Information security policy .54
10.37 Information security procedure .54
10.38 Installation plan .54
10.39 Installation report .54
10.40 Integration and test report .55
10.41 Integration plan .55
10.42 Interface description .55
10.43 Life-cycle policy and procedure .56
10.44 Maintenance plan .56
10.45 Maintenance procedure .56
10.46 Measurement plan .57
10.47 Monitoring and control report .57
10.48 Operational test procedure .57
10.49 Problem management procedure .58
10.50 Problem report .58
10.51 Process assessment procedure .59
10.52 Process improvement analysis report .59
10.53 Product need assessment .59
10.54 Progress report .60
10.55 Project management plan .60
10.56 Proposal .61
10.57 Qualification test procedure .61
10.58 Qualification test report .61
10.59 Quality management plan .62
10.60 Quality management policy and procedure .62
10.61 Release plan .62
10.62 Request for proposal (RFP) .63
10.63 Resource request .64
© ISO/IEC 2015 – All rights reserved
iv © IEEE 2015 – All rights reserved.

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 15289:2015(E)

10.64 Reuse plan . 64
10.65 Review minutes . 64
10.66 Risk action request . 64
10.67 Risk management policy and plan . 65
10.68 Service catalog . 65
10.69 Service continuity and availability plan . 65
10.70 Service level agreement (SLA) . 66
10.71 Service management plan . 66
10.72 Service plan . 67
10.73 Service report . 67
10.74 Software architecture description . 68
10.75 Software design description . 69
10.76 Software requirements specification . 70
10.77 Software unit description . 70
10.78 Software unit test procedure . 70
10.79 Software unit test report . 71
10.80 Supplier management procedure . 71
10.81 Supplier selection procedure . 71
10.82 System architecture description . 71
10.83 System element description . 72
10.84 System requirements specification . 72
10.85 Training documentation . 73
10.86 Training plan . 73
10.87 User documentation . 73
10.88 User notification . 74
10.89 Validation plan . 74
10.90 Validation report . 74
10.91 Validation test specification . 75
10.92 Verification plan . 75
10.93 Verification report . 76
Annex A (informative) Procedure for identifying information items and their contents . 77
Annex B (informative) Information items and records by source . 79
Bibliography . 83
List of Tables
Table 1 — Mapping of ISO/IEC 15288:2008 (IEEE Std 15288-2008), clauses to information items
for each system life-cycle process . 17
Table 2 — Mapping of ISO/IEC 12207:2008 (IEEE Std 12207-2008) clauses to information items
for each software life-cycle process . 22
Table 3 — Mapping of ISO/IEC 20000-1:2011 (IEEE Std 20000-1:2013) and ISO/IEC 20000-2:2012 (IEEE
Std 20000-2:2013) clauses to information items for each service management process . 30
Table 4 — Record references and contents . 36
Table B.1 — Information items by source . 79
Table B.2 — Records by source . 81



© ISO/IEC 2015 – All rights reserved
© IEEE 2015 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 15289:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards ISO (the
International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the
specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in
the development of International Standards through technical committees established by the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in
fields of mutual interest. Other international organizations, governmental and non- governmental, in liaison with
ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a
joint technical committee, ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees
of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a
consensus development process, approved by the American National Standards Institute, which brings together
volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not
necessarily members of the Institute and serve without compensation. While the IEEE administers the process
and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted by
the joint technical committee are circulated to national bodies for voting. Publication as an International Standard
requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or
patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of
patents or patent claims or determining whether any licensing terms or conditions provided in connection with
submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any
licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own
responsibility. Further information may be obtained from ISO or the IEEE Standards Association.
ISO/IEC/IEEE 15289 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 7, Software and systems engineering, in cooperation with the Software & Systems Engineering
Standards Committee of the IEEE Computer Society, under the Partner Standards Development Organization
cooperation agreement between ISO and IEEE.
This second edition cancels and replaces the first edition (ISO/IEC 15289:2011), of which it constitutes a minor
revision. This second edition reflects ISO/IEC 20000-1:2011 (IEEE Std 20000-1-2013) and ISO/IEC 20000-2:2012
(IEEE Std 20000-2-2013), which replaced ISO/IEC 20000-1:2005 and ISO/IEC 20000-2:2005.
© ISO/IEC 2015 – All rights reserved
vi © IEEE 2015 – All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 15289:2015(E)
Introduction
The purpose of this International Standard is to provide requirements for identifying and planning the specific
information items (information products) to be developed and revised during systems and software life cycles
and service processes. This International Standard specifies the purpose and content of all identified systems
and software life-cycle information items, as well as information items for information technology service
management. The information item contents are defined according to generic document types and the specific
purpose of the document. Information items may be combined or subdivided as needed for project or
organizational purposes.
This International Standard is based on the life-cycle processes specified in ISO/IEC 12207:2008 (IEEE Std
12207-2008), Systems and software engineering — Software life cycle processes; ISO/IEC 15288:2008 (IEEE
Std 15288-2008), Systems and software engineering — System life cycle processes; and the service
management processes specified in ISO/IEC 20000-1:2011 (IEEE Std 20000-1-2013), Information technology —
Service management — Part 1: Service Management System Requirements; and ISO/IEC 20000-2:2012 (IEEE
Std 20000-2-2013), Information technology — Service management — Part 2: Guidance on the application of
service management systems.
IEEE contributed IEEE Std 12207.1-1997, IEEE Guide for Information Technology — Software Life Cycle
Processes — Life Cycle Data. (ISO/IEC 12207) IEEE Guide for Standard for Information Technology — Software
life cycle processes — Life cycle data, as a source for this International Standard

© ISO/IEC 2015 – All rights reserved
© IEEE 2015 – All rights reserved vii

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 15289:2015(E)
Systems and software engineering — Content of life-cycle
information items (documentation)
1 Scope
This International Standard specifies the purpose and content of all identified systems and sof
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.