Nickel — Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents — Electrothermal atomic absorption spectrometric method

Applies to the determination of the given elements of high purity, refined, wrought and cast nickel within the ranges specifies in table 1. This method is applicable to the indipendent determination of any one or more of the elements listed. Annex A gives an alternative method for preparation of nickel nitrate solution for electrothermal atomic analysis, and annex B contains a statistical report of interlaboratory tests.

Nickel — Dosage de l'argent, de l'arsenic, du bismuth, du cadmium, du plomb, de l'antimoine, du sélénium, de l'étain, du tellure et du thallium — Méthode par spectrométrie d'absorption atomique électrothermique

Nikelj - Določanje srebra, arzena, bizmuta, kadmija, svinca, antimona, selena, kositra, telurja in talija - Elektrotermična atomska absorpcijska spektrometrična metoda

General Information

Status
Published
Publication Date
18-Dec-1985
Current Stage
9093 - International Standard confirmed
Completion Date
05-Mar-2024

Buy Standard

Standard
ISO 7523:1997
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 7523:1985 - Nickel -- Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -- Electrothermal atomic absorption spectrometric method
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7523:1985 - Nickel -- Dosage de l'argent, de l'arsenic, du bismuth, du cadmium, du plomb, de l'antimoine, du sélénium, de l'étain, du tellure et du thallium -- Méthode par spectrométrie d'absorption atomique électrothermique
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7523:1985 - Nickel -- Dosage de l'argent, de l'arsenic, du bismuth, du cadmium, du plomb, de l'antimoine, du sélénium, de l'étain, du tellure et du thallium -- Méthode par spectrométrie d'absorption atomique électrothermique
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 7523:1997
01-maj-1997
1LNHOM'RORþDQMHVUHEUDDU]HQDEL]PXWDNDGPLMDVYLQFDDQWLPRQDVHOHQD
NRVLWUDWHOXUMDLQWDOLMD(OHNWURWHUPLþQDDWRPVNDDEVRUSFLMVNDVSHNWURPHWULþQD
PHWRGD
Nickel -- Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium,
tin, tellurium and thallium contents -- Electrothermal atomic absorption spectrometric
method
Nickel -- Dosage de l'argent, de l'arsenic, du bismuth, du cadmium, du plomb, de
l'antimoine, du sélénium, de l'étain, du tellure et du thallium -- Méthode par
spectrométrie d'absorption atomique électrothermique
Ta slovenski standard je istoveten z: ISO 7523:1985
ICS:
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST ISO 7523:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7523:1997

---------------------- Page: 2 ----------------------

SIST ISO 7523:1997
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION~MEX~YHAPO~HAR OPI-AHM3AL&lR l-IO CTAH,QAPTM3AL&lM~ORGANISATlON INTERNATIONALE DE NORMALISATION
Nickel - Determination of silver, arsenic, bismuth,
Cadmium, lead, antimony, selenium, tin, tellurium and
thallium contents - Electrothermal atomic absorption
spectrometric method
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du Cadmium, du plomb, de l’antimoine, du selenium, de l’etain, du tellure
et du thallium - M& thode par spectromt5 trie d ‘absorp tion a tomique electro thermique
First edition - 1985-12-15
Ref. No. ISO 7523-1985 (E)
UDC 669.24 : 543.7 : 546
Descriptors : nickel, Chemical analysis, determination of content, silver, arsenic, bismuth, Cadmium, lead, antimony, selenium, tin, tellurium,
thallium, electrothermal atomic absorption method.
Price based on 8 pages

---------------------- Page: 3 ----------------------

SIST ISO 7523:1997
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 7523 was prepared by Technical Committee ISO/TC 155,
Nickel and nicke1 alloys.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
International Organkation for Standardkation, 1985
0
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 7523:1997
INTERNATIONAL STANDARD ISO 7523-1985 (E)
Nickel - Determination of silver, arsenic, bismuth,
Cadmium, lead, antimony, selenium, tin, tellurium and
Electrothermal atomic absorption
thallium contents -
spectrometric method
3 Principle
1 Scope and field of application
Dissolution of a test Portion in nitric acid and dilution of the
This International Standard specifies an electrothermal atomic
Solution to a known volume.
absorption spectrometric method for the determination of the
silver, arsenic, bismuth, Cadmium, lead, antimony, selenium,
Introduction of a known volume of the Solution into an elec-
tin, tellurium and thallium contents of high purity, refined,
trothermal atomizer of an atomic absorption spectrometer.
wrought and cast nicke1 within the ranges specified in table 1.
This method is applicable to the independent determination of
Measurement of the absorption of the resonance line energy
any one or more of the elements listed without including all
from the spectrum of each element and comparison with that
elements specified in the Standard solutions.
of calibration solutions of the same element in a matched nicke1
matrix using background correction.
Table 1 - Concentration ranges of elements
to be determined
4 Reagents
Concentration range”
Element
(pg/g)""
During the analysis, unless otherwise stated, use only reagents
0,l to 10
Ag
of recognized analytical grade and only deionized water or
As 1 to 20
water of equivalent purity.
Bi 0,5 to 15
Cd 0,l to 2
0,l to 10
Pb
4.1 Nitrit acid, !p20 = 1,41 g/ml.
Sb 1 to 10
1 to 10
Se
The same batch of nitric acid shall be used throughout the pro-
Sn 1 to 5
0,2 to 10 cedure.
Te
Tl 0,5 to 10
I
...

International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION~MEX~YHAPO~HAR OPI-AHM3AL&lR l-IO CTAH,QAPTM3AL&lM~ORGANISATlON INTERNATIONALE DE NORMALISATION
Nickel - Determination of silver, arsenic, bismuth,
Cadmium, lead, antimony, selenium, tin, tellurium and
thallium contents - Electrothermal atomic absorption
spectrometric method
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du Cadmium, du plomb, de l’antimoine, du selenium, de l’etain, du tellure
et du thallium - M& thode par spectromt5 trie d ‘absorp tion a tomique electro thermique
First edition - 1985-12-15
Ref. No. ISO 7523-1985 (E)
UDC 669.24 : 543.7 : 546
Descriptors : nickel, Chemical analysis, determination of content, silver, arsenic, bismuth, Cadmium, lead, antimony, selenium, tin, tellurium,
thallium, electrothermal atomic absorption method.
Price based on 8 pages

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 7523 was prepared by Technical Committee ISO/TC 155,
Nickel and nicke1 alloys.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
International Organkation for Standardkation, 1985
0
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD ISO 7523-1985 (E)
Nickel - Determination of silver, arsenic, bismuth,
Cadmium, lead, antimony, selenium, tin, tellurium and
Electrothermal atomic absorption
thallium contents -
spectrometric method
3 Principle
1 Scope and field of application
Dissolution of a test Portion in nitric acid and dilution of the
This International Standard specifies an electrothermal atomic
Solution to a known volume.
absorption spectrometric method for the determination of the
silver, arsenic, bismuth, Cadmium, lead, antimony, selenium,
Introduction of a known volume of the Solution into an elec-
tin, tellurium and thallium contents of high purity, refined,
trothermal atomizer of an atomic absorption spectrometer.
wrought and cast nicke1 within the ranges specified in table 1.
This method is applicable to the independent determination of
Measurement of the absorption of the resonance line energy
any one or more of the elements listed without including all
from the spectrum of each element and comparison with that
elements specified in the Standard solutions.
of calibration solutions of the same element in a matched nicke1
matrix using background correction.
Table 1 - Concentration ranges of elements
to be determined
4 Reagents
Concentration range”
Element
(pg/g)""
During the analysis, unless otherwise stated, use only reagents
0,l to 10
Ag
of recognized analytical grade and only deionized water or
As 1 to 20
water of equivalent purity.
Bi 0,5 to 15
Cd 0,l to 2
0,l to 10
Pb
4.1 Nitrit acid, !p20 = 1,41 g/ml.
Sb 1 to 10
1 to 10
Se
The same batch of nitric acid shall be used throughout the pro-
Sn 1 to 5
0,2 to 10 cedure.
Te
Tl 0,5 to 10
It may be necessary to redistil the nitric acid if high blanks are
NOTE -
* For specific compositions, see ISO 6283.
obtained.
** 1 j.Jg/g = 1 g/t
4.2 Nitrit acid, ~20 = 1,41 glml, diluted 1 + 19.
For potential interferences and precautions, see clause 9.
The same batch of nitric acid shall be used throughout the pro-
cedure.
2 References
4.3 Mixed analyte Standard solutions.
ISO 38511, Laboratory glassware - Burettes - Part 7: General
requiremen ts.
4.3.1 Analyte stock Standard solutions, corresponding to
1,000 g of Ag, As, Bi, Cd, Pb, Sb, Se, Sn, Te and Tl per litre.
ISO 648, Laboratory glassware - One-mark pipettes.
Prepare separately for each metal of interest.
ISO 1042, Laboratory glassware - One-mark volumetric flasks.
4.3.1 .l Silver, arsenic, bismuth, Cadmium, lead, selenium and
ISO 5725, Precision of test methods - Determination of
tellurium.
repea tability and reproducibility b y in ter-labora tory tests.

---------------------- Page: 3 ----------------------
ISO 75234985 (EI
4.3.3 Mixe dard Solution corresponding
Weigh, to the n
...

Norme internationale
7523
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoMElKfiYHAPOfiHAR OPrAHM3ALWlR Il0 CTAHllAPTl’l3ALlMM~ORGANISATION INTERNATIONALE DE NORMALISATION
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du
cadmium, du plomb, de l’antimoine, du sélénium, de
l’étain, du tellure et du thallium - Méthode par
spectrométrie d’absorption atomique électrothermique
Nickel - Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -
Electre thermal a tomic absorption spectrometric method
Première édition - 1985-12-15
Réf. no : ISO 75234985 (F)
CDU 669.24 : 543.7 : 546
: nickel, analyse chimique, dosage, argent, arsenic, bismuth, cadmium, plomb, antimoine, sélénium, étain, tellure, thallium,
Descripteurs
méthode d’absorption atomique électrothermique.
Prix basé sur 8 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 7523 a été élaborée par le comité technique ISO/TC 155,
Nickel et alliages de nickel.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
Organisation internationale de normalisation, 1985
0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 75234985 (FI
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du
cadmium, du plomb, de l’antimoine, du sélénium, de
l’étain, du tellure et du thallium - Méthode par
spectrométrie d’absorption atomique électrothermique
3 Principe
1 Objet et domaine d’application
Mise en solution d’une prise d’essai dans de l’acide nitrique et
La présente Norme internationale spécifie une méthode de
dilution de la solution à un volume connu.
dosage par spectrométrie d’absorption atomique électrothermi-
que de l’argent, de l’arsenic, du bismuth, du cadmium, du
Introduction d’un volume connu de la solution dans un atomiseur
plomb, de l’antimoine, du sélénium, de l’étain, du tellure et du
électrothermique d’un spectrométre d’absorption atomique.
thallium contenus aux teneurs indiquées dans le tableau 1, dans
le nickel trés pur, raffiné, de corroyage ou de fonderie. Cette
Mesure de l’absorption de l’énergie de la raie de résonance sur
méthode est applicable au dosage séparé d’un ou plusieurs des
le spectre de chaque élément et comparaison de celle-ci avec
éléments indiqués, sans qu’il soit besoin que les solutions éta-
l’absorption des solutions d’étalonnage du même élément dans
lons les contiennent tous.
une matrice de nickel appariée avec correction de fond.
Tableau 1 - Gammes de concentration
des éléments à doser 4 Réactifs
Gamme de concentration*
ÉMment
Au cours de l’analyse, sauf indications différentes, utiliser uni-
(pg/g)“”
quement des réactifs de qualité analytique reconnue, et de l’eau
0,l à 10
Ag
déionisée ou de l’eau de pureté équivalente.
As 1 à 20
Bi 0,5 à 15
Cd 0,l à 2 4.1 Acide nitrique, ,920 = 1,41 g/ml.
Pb 0,l à 10
Sb 1 à 10
Le même échantillon d’acide nitrique doit servir pour toute
Se 1 à 10
l’analyse.
Sn là5
Te
0,2 à 10
NOTE - II peut s’avérer nécessaire de redistiller l’acide nitrique si l’on
TI 0,5 à 10
obtient des valeurs élevées d’essai à blanc.
* Pour les compositions spécifiques, voir ISO 6283.
4.2 Acide nitrique, e20 = 1,41 g/ml, dilué 1 + 19.
** 1 pglg = 1 glt
Le même échantillon d’acide nitrique doit servir pour toute
Pour les interférences potentielles, voir chapitre 9.
l’analyse.
4.3 Solutions étalons mixtes des éléments 6 doser.
2 Références
4.3.1 Solutions mères étalons des éléments à doser, cor-
ISO 38511, Verrerie de laboratoire - Burettes - Partie 7:
respondant à 1,000 g de Ag, As, Bi, Cd, Pb, Sb, Se, Sn, Te et
Spécifications générales.
TI par litre.
ISO 648, Verrerie de laboratoire - Pipettes à un trait.
À préparer séparément pour chaque métal considéré.
I SO 1042, Verrerie de labora taire - Fioles jaugées
...

Norme internationale
7523
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONoMElKfiYHAPOfiHAR OPrAHM3ALWlR Il0 CTAHllAPTl’l3ALlMM~ORGANISATION INTERNATIONALE DE NORMALISATION
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du
cadmium, du plomb, de l’antimoine, du sélénium, de
l’étain, du tellure et du thallium - Méthode par
spectrométrie d’absorption atomique électrothermique
Nickel - Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -
Electre thermal a tomic absorption spectrometric method
Première édition - 1985-12-15
Réf. no : ISO 75234985 (F)
CDU 669.24 : 543.7 : 546
: nickel, analyse chimique, dosage, argent, arsenic, bismuth, cadmium, plomb, antimoine, sélénium, étain, tellure, thallium,
Descripteurs
méthode d’absorption atomique électrothermique.
Prix basé sur 8 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 7523 a été élaborée par le comité technique ISO/TC 155,
Nickel et alliages de nickel.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
Organisation internationale de normalisation, 1985
0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 75234985 (FI
Nickel - Dosage de l’argent, de l’arsenic, du bismuth, du
cadmium, du plomb, de l’antimoine, du sélénium, de
l’étain, du tellure et du thallium - Méthode par
spectrométrie d’absorption atomique électrothermique
3 Principe
1 Objet et domaine d’application
Mise en solution d’une prise d’essai dans de l’acide nitrique et
La présente Norme internationale spécifie une méthode de
dilution de la solution à un volume connu.
dosage par spectrométrie d’absorption atomique électrothermi-
que de l’argent, de l’arsenic, du bismuth, du cadmium, du
Introduction d’un volume connu de la solution dans un atomiseur
plomb, de l’antimoine, du sélénium, de l’étain, du tellure et du
électrothermique d’un spectrométre d’absorption atomique.
thallium contenus aux teneurs indiquées dans le tableau 1, dans
le nickel trés pur, raffiné, de corroyage ou de fonderie. Cette
Mesure de l’absorption de l’énergie de la raie de résonance sur
méthode est applicable au dosage séparé d’un ou plusieurs des
le spectre de chaque élément et comparaison de celle-ci avec
éléments indiqués, sans qu’il soit besoin que les solutions éta-
l’absorption des solutions d’étalonnage du même élément dans
lons les contiennent tous.
une matrice de nickel appariée avec correction de fond.
Tableau 1 - Gammes de concentration
des éléments à doser 4 Réactifs
Gamme de concentration*
ÉMment
Au cours de l’analyse, sauf indications différentes, utiliser uni-
(pg/g)“”
quement des réactifs de qualité analytique reconnue, et de l’eau
0,l à 10
Ag
déionisée ou de l’eau de pureté équivalente.
As 1 à 20
Bi 0,5 à 15
Cd 0,l à 2 4.1 Acide nitrique, ,920 = 1,41 g/ml.
Pb 0,l à 10
Sb 1 à 10
Le même échantillon d’acide nitrique doit servir pour toute
Se 1 à 10
l’analyse.
Sn là5
Te
0,2 à 10
NOTE - II peut s’avérer nécessaire de redistiller l’acide nitrique si l’on
TI 0,5 à 10
obtient des valeurs élevées d’essai à blanc.
* Pour les compositions spécifiques, voir ISO 6283.
4.2 Acide nitrique, e20 = 1,41 g/ml, dilué 1 + 19.
** 1 pglg = 1 glt
Le même échantillon d’acide nitrique doit servir pour toute
Pour les interférences potentielles, voir chapitre 9.
l’analyse.
4.3 Solutions étalons mixtes des éléments 6 doser.
2 Références
4.3.1 Solutions mères étalons des éléments à doser, cor-
ISO 38511, Verrerie de laboratoire - Burettes - Partie 7:
respondant à 1,000 g de Ag, As, Bi, Cd, Pb, Sb, Se, Sn, Te et
Spécifications générales.
TI par litre.
ISO 648, Verrerie de laboratoire - Pipettes à un trait.
À préparer séparément pour chaque métal considéré.
I SO 1042, Verrerie de labora taire - Fioles jaugées
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.