Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement

ISO 10302-1:2011 specifies methods for measuring the airborne noise emitted by small air-moving devices (AMDs), such as those used for cooling electronic, electrical, and mechanical equipment where the sound power level of the AMD is of interest. Examples of these AMDs include propeller fans, tube-axial fans, vane-axial fans, centrifugal fans, motorized impellers, and their variations. ISO 10302-1:2011 describes the test apparatus and methods for determining the airborne noise emitted by small AMDs as a function of the volume flow rate and the fan static pressure developed by the AMD on the test apparatus. It is intended for use by AMD manufacturers, by manufacturers who use AMDs for cooling electronic equipment and similar applications, and by testing laboratories. It provides a method for AMD manufacturers, equipment manufacturers and testing laboratories to obtain comparable results. Results of measurements made in accordance with ISO 10302-1:2011 are expected to be used for engineering information and performance verification, and the methods can be cited in purchase specifications and contracts between buyers and sellers. The ultimate purpose of the measurements is to provide data to assist the designers of electronic, electrical or mechanical equipment which contains one or more AMDs. Based on experimental data, a method is given for calculating the maximum volume flow rate of the scaled plenum up to which ISO 10302-1:2011 is applicable.

Acoustique — Mesurage du bruit aérien émis et des vibrations de structure induites par les petits équipements de ventilation — Partie 1: Mesurage du bruit aérien

General Information

Status
Withdrawn
Publication Date
05-Jan-2011
Current Stage
9599 - Withdrawal of International Standard
Completion Date
02-Feb-2024
Ref Project

Relations

Buy Standard

Standard
ISO 10302-1:2011 - Acoustics -- Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
English language
37 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10302-1
First edition
2011-01-15


Acoustics — Measurement of airborne
noise emitted and structure-borne
vibration induced by small air-moving
devices —
Part 1:
Airborne noise measurement
Acoustique — Mesurage du bruit aérien émis et des vibrations de
structure induites par les petits équipements de ventilation —
Partie 1: Mesurage du bruit aérien





Reference number
ISO 10302-1:2011(E)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 10302-1:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10302-1:2011(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
3.1 General definitions.2
3.2 Acoustical definitions .3
3.3 Aerodynamic definitions.3
4 Limitations of measurement .5
5 Design and performance requirements for test plenum .5
5.1 General .5
5.2 Test plenum: Main assembly .6
5.3 Mounting panel assembly .6
5.4 Adjustable exit port assembly .7
5.5 Insertion loss of test plenum .7
5.6 Instrumentation for static pressure measurement .7
6 Installation.8
6.1 Installation of test plenum in test room .8
6.2 Direction of airflow .8
6.3 Mounting of air-movin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.