Ships and marine technology — Servicing of inflatable life-saving appliances — Part 1: General

This document, in conjunction with ISO 18079‑2, ISO 18079‑3, ISO 18079‑4 and ISO 18079‑5, states general provisions for servicing stations for inflatable life-saving appliances including, but not limited to, those subject to SOLAS III/20.8.

Navires et technologie maritime — Entretien des dispositifs de sauvetage gonflables — Partie 1: Généralités

General Information

Status
Published
Publication Date
29-May-2018
Current Stage
9093 - International Standard confirmed
Completion Date
19-Sep-2023
Ref Project

Buy Standard

Standard
ISO 18079-1:2018 - Ships and marine technology -- Servicing of inflatable life-saving appliances
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18079-1
First edition
2018-06
Ships and marine technology —
Servicing of inflatable life-saving
appliances —
Part 1:
General
Navires et technologie maritime — Entretien des dispositifs
de sauvetage gonflables —
Partie 1: Généralités
Reference number
ISO 18079-1:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 18079-1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18079-1:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Responsibilities of servicing stations . 2
4.1 General . 2
4.2 Responsibilities of Administrations. 2
4.3 Responsibilities of manufacturers . 3
5 Servicing manual . 3
6 Servicing station — Quality assurance . 4
6.1 General . 4
6.2 Quality management system . 4
7 Servicing facilities and provisions . 4
8 Training and certification of servicing personnel . 5
8.1 General . 5
8.2 Training programme . 6
8.2.1 General. 6
8.2.2 Initial certification of new technicians .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.