Respiratory protective devices — Performance requirements — Part 6: Special application escape - Filtering RPD and supplied breathable gas RPD

This document specifies the requirements for supplied breathable gas RPD and for filtering RPD to be used for special application escape for use in the workplace to protect the wearer.

Appareils de protection respiratoire — Exigences de performances — Partie 6: Application particulière d'évacuation - APR alimentés en gaz respirable et APR filtrants

Le présent document spécifie les exigences pour les APR alimentés en gaz respirable et les APR filtrants utilisés pour des applications particulières d'évacuation pour utilisation sur le lieu de travail afin de protéger le porteur.

General Information

Status
Published
Publication Date
07-Feb-2021
Current Stage
6060 - International Standard published
Start Date
08-Feb-2021
Due Date
06-Nov-2021
Completion Date
08-Feb-2021
Ref Project

Buy Standard

Standard
ISO 17420-6:2021 - Respiratory protective devices -- Performance requirements
English language
32 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 17420-6:2021 - Appareils de protection respiratoire -- Exigences de performances
French language
33 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 17420-6:Version 14-nov-2020 - Respiratory protective devices -- Performance requirements
English language
32 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 17420-6:Version 26-dec-2020 - Appareils de protection respiratoire -- Exigences de performances
French language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17420-6
First edition
2021-02
Respiratory protective devices —
Performance requirements —
Part 6:
Special application escape - Filtering
RPD and supplied breathable gas RPD
Appareils de protection respiratoire — Exigences de performances —
Partie 6: Application particulière d'évacuation - APR alimentés en gaz
respirable et APR filtrants
Reference number
ISO 17420-6:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 17420-6:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17420-6:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviations . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 3
4 Classification overview . 3
4.1 General . 3
4.2 Supplied breathable gas RPD for escape . 3
4.3 Filtering RPD for escape . 4
5 General requirements for RPD . 4
6 Basic requirements for supplied breathable gas RPD and filtering RPD .4
7 Special application for supplied breathable gas escape RPD and filtering escape RPD .4
7.1 Special application escape RPD - Requirement matrices . 4
7.1.1 General. 4
7.1.2 Supplied breathable gas RPD — Escape . 4
7.1.3 Filtering escape RPD . . 6
7.2 Requirements for special application escape RPD . 8
7.2.1 Exposure to dust . 8
7.2.2 Contact with hot or cold surfaces generated by the RPD . 8
7.2.3 Avoidance of frictional sparks - Filtering escape RPD and supplied
breathable gas escape RPD . 9
7.2.4 Resistance to flame . 9
7.2.5 Mechanical Requirement .10
7.2.6 Requirements for escape RPD used in explosive atmospheres and
electromagnetic compatibility .10
7.2.7 Antistatic properties - Filtering escape RPD and supplied breathable gas
escape RPD . .11
7.2.8 Eye irritation (external) - Filtering escape RPD and supplied breathable
gas escape RPD .11
7.2.9 Determination of duration .12
7.2.10 Validation of escape RPD performance requirements .14
7.3 Pre-conditioning .28
7.3.1 Exposure to impact from drop — Filtering escape RPD and supplied
breathable gas escape RPD .28
7.3.2 Resistance to changes in atmospheric pressure .28
7.3.3 Intermittent exposure to salt spray .28
7.3.4 Exposure to vibration and shock for supplied breathable gas escape RPD .29
7.3.5 Exposure to vibration and shock - marine .29
7.3.6 Exposure to vibration and shock - mining .30
7.3.7 Filtering escape RPD . .31
8 Inspection .31
8.1 General .31
8.2 Inspection .31
8.3 Testing of leak tightness using positive pressure .32
9 Marking .32
10 Information supplied by the RPD manufacturer .32
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 17420-6:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 94, Personal safety – Personal protective
equipment, Subcommittee SC 15, Respiratory protective devices.
A list of all parts in the ISO 17420 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 17420-6:2021(E)

Introduction
This document describes requirements for RPD including its elements and components used for special
applications for escape devices.
Some test methods are described. For other test methods references are given to the ISO 16900 series
"Methods of test and test equipment" or other test methods not developed by ISO/TC 94/SC 15.
The sequence of testing follows the principle to minimize the necessary number of samples by carrying
out destructive tests at the end. It also includes for safety reason that tests with test subjects are only
carried out after the test samples have shown their safe performance in other tests.
© ISO 2021 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 17420-6:2021(E)
Respiratory protective devices — Performance
requirements —
Part 6:
Special application escape - Filtering RPD and supplied
breathable gas RPD
1 Scope
This document specifies the requirements for supplied breathable gas RPD and for filtering RPD to be
used for special application escape for use in the workplace to protect the wearer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 8031, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and
conductivity
ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests
ISO 16900-1:2019, Respiratory protective devices — Methods of test and test equipment — Part 1:
Determination of inward leakage
ISO 16900-4, Respiratory protective devices — Methods of test and test equipment — Part 4: Determination
of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
ISO 16900-5, Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing
machine, metabolic simulator, RPD headforms and torso, tools and verification tools
ISO 16900-6, Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical
resistance/strength of components and connections
ISO 16900-8, Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement
of RPD air flow rates of assisted filtering RPD
ISO 16900-9, Respiratory protective devices — Methods of test and test equipment — Part 9: Determination
of carbon dioxide content of the inhaled gas
ISO 16900-10, Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance
to ignition, flame, radiant heat and heat
ISO 16900-12, Respiratory protective devices — Methods of test and test equipment — Part 12:
Determination of volume-averaged work of breathing and peak respiratory pressures
ISO 16972, Respiratory protective devices — Vocabulary and graphical symbols
ISO 17420-1:2021, Respiratory protective devices — Performance requirements — Part 1: General
ISO 17420-2:2021, Respiratory protective devices — Performance requirements — Part 2: Requirements
for filtering RPD
© ISO 2021 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 17420-6:2021(E)

ISO 17420-4:2021, Respiratory protective devices — Performance requirements — Part 4: Requirements
for supplied breathable gas RPD
ISO 23269-2:2011, Ships and marine technology — Breathing apparatus for ships — Part 2: Self-contained
breathing apparatus for shipboard firefighters
IEC 60068-2-27:2010, Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock
IEC 60068-2-64:2009, Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband random
and guidance
IEC 60079-0, Explosive atmospheres — Part 0: Equipment — General requirements
IEC 60079-11, Explosive atmospheres — Part 11: Equipment protection by intrinsic safety “i”
IEC 60079-32-1:2013, Explosive atmospheres — Part 32-1: Electrostatics hazards — Guidance
IEC 60079-32-2:2015, Explosive atmospheres — Part 32-2: Electrostatics hazards — Tests
IEC 60721-1:2003, Classification of environmental conditions — Part 1: Environmental parameters and
their severities
IEC 60721-3-2:2018, Classification of environmental conditions — Part 3-2: Classification of groups of
environmental parameters and their severities — Transportation and Handling
IEC 61000-6-2, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity standard
for industrial environments
EN 50303, Group 1, category M1 equipment intended to remain functional in atmospheres endangered by
firedamp and/or coal dust
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 16972 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1.1
non pre-conditioned state
without pre-conditioning but possibly modified to carry out tests or already used in non-destructive tests
Note 1 to entry: This includes e.g. cleaning and disinfection.
3.1.2
RPD in as worn state
RPD where all components are connected and assembled in the way that it is intended to be used (e.g.
worn by the wearer, adapted to an RPD headform or RPD headform and torso or suitable holder).
Note 1 to entry: All of the various components (e.g. for an assisted filtering RPD: blower unit, battery, RI, filters,
etc.) have been completely assembled and then connected (RI connected to the hose of the blower unit) together
in accordance with the information supplied by the manufacturer.
3.1.3
component in ready for assembly state
component with seals, plugs, packaging or other environmental protective means, still in place
2 © ISO 2021 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 17420-6:2021(E)

3.1.4
RPD in ready for assembly state
RPD with seals, plug, or other environmental protective means, still in place
Note 1 to entry: In line with the information supplied by the manufacturer for donning the RPD, further actions
can be necessary.
3.1.5
RPD in ready for use state
RPD ready to be donned as described by the manufacturer, but seals, plug, or other environmental
protective means are already removed
Note 1 to entry: In line with the information supplied by the manufacturer for donning the RPD, further actions
can be necessary.
Note 2 to entry: For escape devices this includes also the RPD in its container unopened.
3.2 Abbreviated terms
RI Respiratory Interface
RPD Respiratory Protective Devices
V Tidal volume
T
WoB Work of Breathing
4 Classification overview
ISO 17420-2:2021, Clause 4 or ISO 17420-4:2021, Clause 4 applies.
4.1 General
ISO 17420-1:2021, 4.1 applies.
The following subclause applies in addition to ISO 17420-2:2021, Clause 4:
4.2 Supplied breathable gas RPD for escape
In addition, supplied breathable gas RPD may be classified for one or more special applications, as given
in Table 1.
Table 1 — Special application classification supplied breathable gas RPD
Special application Classes
a
ES MN t (Underground mining escape)
a
ES MA t (Marine escape)
Escape
a
ES FF t (Escape from fire)
a
ES t (Escape general supplied breathable gas)
a
Nominal service life in t minutes, e.g. ES 15.
Example for a special application escape with Protection class (PC4), RI class (dL) and special application
class (ES 15).
EXAMPLE PC4 dL ES 15.
The following subclause applies in addition to ISO 17420-2:2021, Clause 4.
© ISO 2021 – All rights reserved 3

---------------------- Page: 8 ----------------------
ISO 17420-6:2021(E)

4.3 Filtering RPD for escape
In addition, filtering RPD may be classified for one or more special applications, as given in Table 2.
Table 2 — Special application classification of filtering RPD
Special application Classes
a
ES MN t (Underground Mining Escape)
a
Escape ES FF t (Escape from fire)
b a
ES XX t (Escape general filtering)
a
Nominal service life in "t" minutes, e.g. ES 10.
b
Gas type.
Example for a special application escape general with Protection class (PC3), RI class (bT) and special
application escape (ES), particle filter performance class (F3) and gas filter class (AC) and class t (10).
EXAMPLE PC3 bT ES F3 AC10.
Multi-functional filtering RPD have separate classifications for each function, i.e. one classification for
the unassisted mode and one classification for the assisted mode.
5 General requirements for RPD
ISO 17420-1:2021, Clause 5 and ISO 17420-2:2021, Clause 5 or ISO 17420-4:2021, Clause 5 apply.
6 Basic requirements for supplied breathable gas RPD and filtering RPD
All requirements of ISO 17420-2:2021, Clause 6 or ISO 17420-4:2021, Clause 6 apply unless superseded
by this document and indicated in the relevant clauses.
NOTE 1 Optional features are also given in ISO 17420-2 or ISO 17420-4.
NOTE 2 Where requirements are superseded by those in Clause 7 of this document test schedules given in
ISO 17420-2:2021, Annex C or ISO 17420-4:2021, Annex C can be used as a guideline.
7 Special application for supplied breathable gas escape RPD and filtering
escape RPD
7.1 Special application escape RPD - Requirement matrices
7.1.1 General
Supplied breathable gas escape RPD shall fulfil all requirements given in Table 3
Filtering escape RPD shall fulfil all requirements given in Table 4.
7.1.2 Supplied breathable gas RPD — Escape
Table 3 gives an overview about requirements and preconditioning of special application supplied
breathable gas RPD — Escape.
For each line in the table, at least one RPD shall be tested after the required preconditioning or set of
pre-conditionings where combined by “&”. Combined preconditioning shall be completed in the order
specified.
Table 3 shall be read as follows:
4 © ISO 2021 – All rights reserved

---------------------- Page: 9 ----------------------
ISO 17420-6:2021(E)

In the first column the clause numbers of the requirements are given. In the third to sixth column the
required pre-conditioning for different escape classes are given.
In the second column the requirement is titled.
For each pre-conditioning within one line of the cell different sample(s) shall be used.
For the requirement 7.2.10.1 and class marine escape the following applies:
At least one sample shall be pre-conditioned TH&VSS&IE (Exposure to temperature and humidity,
exposure to vibration and shock – marine and intermittend exposure).
At least one further sample shall be pre-conditioned DR (Exposure to impact from drop)
For the total number of samples see ISO 17420-1:2021, 5.1.
Table 3 — Special application requirement overview — Supplied breathable gas RPD — Escape
Supplied
breathable Escape Marine Underground
gas escape from fire escape mining escape
general
a a a a
ES t ES FF t ES MA t ES MN t
Requirement Title
Protection Protection Protection
Protection class
class class class
≥PC3
≥PC3 ≥PC3 ≥PC3
Pre-conditioning
b b b b
7.2.1 Exposure to dust X X X X
Contact with hot and cold
c
7.2.2.1 surfaces – Supplied breath- TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
able gas escape RPD
7.2.3 Avoidance of frictional sparks AR/NP AR/NP AR/NP AR/NP
d
7.2.4.1 Six burner dynamic — AR AR AR
d d d
7.2.6.2 Intrinsic Safety – Firefighting — AR/NP — —
d d d
7.2.6.3 Intrinsic Safety – Mining — — — AR/NP
d d
7.2.6.4 Intrinsic Safety – Marine — — AR/NP —
d
Antistatic properties - Gen- —
7.2.7.1 AR/NP AR/NP AR/NP
eral
a
Nominal service life in “t” min, see also 7.2.9.1.
b
X means exposure to dust has to be addressed by the FMEA (see 7.2.1).
c
Will be determined during the validation of escape RPD performance regime specified in 7.2.10.
d
— means that a test is not required for this combination of requirement and special application class.
AR as received.
AR/NP as received or in non pre-conditioned state.
TH&VS&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock
(ISO 17420-4:2021, 6.11.1.1.3) and intermittent exposure to salt spray (7.3.3).
TH&VSF&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock-fire
fighting (ISO 17420-5:—, 7.3.2) and intermittent exposure to salt spray (7.3.3).
TH&VSS&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock marine
(7.3.5) and intermittent exposure to salt spray (7.3.3).
TH&VSM&PR&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock
mining (7.3.6), resistance to changes in atmospheric pressure (7.3.2) and intermittent exposure to salt spray (7.3.3).
DR Exposure to impact from drop (7.3.1).
© ISO 2021 – All rights reserved 5

---------------------- Page: 10 ----------------------
ISO 17420-6:2021(E)

Table 3 (continued)
d d d
Antistatic properties – — — —
7.2.7.2 AR/NP
Fire-fighting
d d d
7.2.7.3 Antistatic properties - Mining — — — AR/NP
d
Antistatic properties - Ex- —
7.2.7.4 AR/NP AR/NP AR/NP
posed RPD hoses
7.2.8 Eye irritation (external) AR/NP AR/NP AR/NP AR/NP
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Determination of duration
7.2.9.2
(t) of Escape RPD
DR DR DR DR
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Validation of escape RPD
7.2.10.1
performance requirements
DR DR DR DR
7.2.10.4 Donning and doffing AR/NP AR/NP AR/NP AR/NP
a
Nominal service life in “t” min, see also 7.2.9.1.
b
X means exposure to dust has to be addressed by the FMEA (see 7.2.1).
c
Will be determined during the validation of escape RPD performance regime specified in 7.2.10.
d
— means that a test is not required for this combination of requirement and special application class.
AR as received.
AR/NP as received or in non pre-conditioned state.
TH&VS&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock
(ISO 17420-4:2021, 6.11.1.1.3) and intermittent exposure to salt spray (7.3.3).
TH&VSF&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock-fire
fighting (ISO 17420-5:—, 7.3.2) and intermittent exposure to salt spray (7.3.3).
TH&VSS&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock marine
(7.3.5) and intermittent exposure to salt spray (7.3.3).
TH&VSM&PR&IE Exposure to temperature and humidity (ISO 17420-4:2021, 6.11.1.1.2), exposure to vibration and shock
mining (7.3.6), resistance to changes in atmospheric pressure (7.3.2) and intermittent exposure to salt spray (7.3.3).
DR Exposure to impact from drop (7.3.1).
7.1.3 Filtering escape RPD
Table 4 gives an overview about requirements and preconditioning of filtering RPD.
At least one RPD shall be tested after each required preconditioning. Pre-conditionings shall not be
combined.
Table 4 shall be read as follows:
In the first column the requirements are given. In the third to fifth column the required pre-conditioning
for different escape classes are given.
In the second column the requirement is titled.
For each pre-conditioning within one line of the cell different sample(s) shall be used.
For the requirement 7.2.10.2.2 and class mining escape the following applies:
At least one sample shall be pre-conditioned TH&VSM&PR&IE (Exposure to temperature and humidity,
exposure to vibration and shock – mining, exposure to positive pressure and intermittent exposure).
At least one further sample shall be pre-conditioned DR (Exposure to impact from drop).
For the total number of samples see ISO 17420-1:2021, 5.1.
6 © ISO 2021 – All rights reserved

---------------------- Page: 11 ----------------------
ISO 17420-6:2021(E)

Table 4 — Special application requirement overview — Filtering RPD — Escape
Filtering es- Escape Underground
cape general from fire mining escape
a b b b
ES XX t ES FF t ES MN t
Requirement Title Protection Protection
Protection class
class class
≥PC3
≥PC3 ≥PC3
Pre-conditioning
c c c
7.2.1 Exposure to dust X X X
TH&MR
Contact with hot surfaces - Filtering
d
7.2.2.2 TH&VSF TH&VSM&PR&IE
escape RPD
DR
e
7.2.3 Avoidance of frictional sparks — AR AR
e
7.2.4.1 Six burner dynamic — AR AR
e e
7.2.6.2 Intrinsic Safety – Firefighting — AR —
e e
7.2.6.3 Intrinsic Safety – Mining — — AR
7.2.7.1 Antistatic properties - General AR AR AR
e e
7.2.7.2 Antistatic properties Firefighting — AR —
e e
7.2.7.3 Antistatic properties - Mining — — AR
e
7.2.7.4 Antistatic properties - Exposed RPD hoses — AR AR
7.2.8 Eye irritation (external) AR AR AR
TH&MR TH&VSF TH&VSM&PR
Determination of duration (t) of filtering
7.2.9.3
escape RPD
DR DR DR
TH&MR&IE TH&VSF&IE TH&VSM&PR&IE
Performance of work of breathing /
7.2.10.2.1
breathing resistance/ elastance for un-
DR DR DR
TH&MR&IE TH&VSF&IE TH&VSM&PR&IE
Performance of work of breathing/breath-
7.2.10.2.2
ing resistance/elastance for assisted
DR DR DR
7.2.10.3 CO concentration limits AR AR AR
2
7.2.10.4 Donning and doffing AR/NP AR/NP AR/NP
a
Gas type.
b
nominal service life in “t” min, see also 7.2.9.1.
c
X means exposure to dust has to be addressed by the FMEA (7.2.1).
d
Will be determined during the performance of work of breathing/breathing resistance/elastance for unassisted
(7.2.10.2.1) or assisted escape RPD (7.2.10.2.2).
e
— means that a test is not required for this combination of requirement and special application class.
AR as received (or in non pre-conditioned state).
DR Exposure to impact from drop (7.3.1).
TH&MR Exposure to temperature and humidity (ISO 17420-2:2021, 6.9.2.2), Mechanical resistance test (ISO 17420-2:2021,
6.9.2.3).
TH&MR&IE Exposure to temperature and humidity (ISO 17420-2:2021, 6.9.2.2), Mechanical resistance test (ISO 17420-
2:2021, 6.9.2.3) and intermittent exposure (7.3.3).
TH&VSF Exposure to temperature and humidity (ISO 17420-2:2021, 6.9.2.2), Vibration and shock–fire-fighting (ISO
17420-5:—, 7.3.2).
TH&VSF&IE Exposure to temperature and humidity (ISO 17420-2:2021, 6.9.2.2), Vibration and shock–fire-fighting
(ISO 17420-5:—, 7.3.2) an
...

NORME ISO
INTERNATIONALE 17420-6
Première édition
2021-02
Appareils de protection
respiratoire — Exigences de
performances —
Partie 6:
Application particulière d'évacuation
- APR alimentés en gaz respirable et
APR filtrants
Respiratory protective devices — Performance requirements —
Part 6: Special application escape - Filtering RPD and supplied
breathable gas RPD
Numéro de référence
ISO 17420-6:2021(F)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 17420-6:2021(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 17420-6:2021(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes, définitions et abréviations . 2
3.1 Termes et définitions . 2
3.2 Abréviations . 3
4 Présentation des classifications . 3
4.1 Généralités . 3
4.2 APR alimentés en gaz respirable pour évacuation . 3
4.3 APR filtrants pour évacuation . 4
5 Exigences générales applicables aux APR . 4
6 Exigences de base pour APR alimentés en gaz respirable et APR filtrants .4
7 Application particulière pour APR d'évacuation alimentés en gaz respirable et APR
d'évacuation filtrants . 5
7.1 APR pour application particulière d'évacuation — Matrices d'exigences. 5
7.1.1 Généralités . 5
7.1.2 APR alimentés en gaz respirable — Évacuation . 5
7.1.3 APR d'évacuation filtrants . 7
7.2 Exigences pour les APR pour application particulière d'évacuation . 9
7.2.1 Exposition à la poussière . 9
7.2.2 Contact avec les surfaces chaudes ou froides générées par l'APR .10
7.2.3 Absence d'étincelles par frottement — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .10
7.2.4 Résistance à la flamme . .10
7.2.5 Exigences mécaniques .11
7.2.6 Exigences relatives aux APR d'évacuation utilisés dans des atmosphères
explosives et compatibilité électromagnétique . .11
7.2.7 Propriétés antistatiques — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .12
7.2.8 Irritation oculaire (externe) — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .13
7.2.9 Détermination de la durée de fonctionnement .13
7.2.10 Validation des exigences de performance de l'APR d'évacuation .16
7.3 Préconditionnement .29
7.3.1 Exposition aux chocs dus aux chutes — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .29
7.3.2 Résistance aux changements de pression atmosphérique .29
7.3.3 Exposition intermittente au brouillard salin .29
7.3.4 Exposition aux vibrations et aux chocs pour APR d'évacuation alimentés
en gaz respirable .30
7.3.5 Exposition aux vibrations et aux chocs — Environnement marins .30
7.3.6 Exposition aux vibrations et aux chocs — Exploitation minière .31
7.3.7 APR d'évacuation filtrants .32
8 Inspection .32
8.1 Généralités .32
8.2 Inspection .32
8.3 Essai d'étanchéité par pression positive.33
9 Marquage .33
10 Informations fournies par le fabricant d'APR .33
© ISO 2021 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 17420-6:2021(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/ iso/ fr/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 94, Sécurité individuelle — Équipement
de protection individuelle, sous-comité SC 15, Appareils de protection respiratoire.
Une liste de toutes les parties de la série ISO 17420 se trouve sur le site web de l'ISO.
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l'adresse www .iso .org/ fr/ members .html.
iv © ISO 2021 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 17420-6:2021(F)

Introduction
Le présent document décrit les exigences relatives aux APR, y compris ses éléments et composants,
utilisés pour des applications particulières de dispositifs d'évacuation.
Certaines méthodes d'essai sont décrites. Pour les autres méthodes d'essai, il est fait référence à la série
ISO 16900, «Méthodes d'essai et équipement d'essai» ou à d'autres méthodes d'essai non élaborées par
l'ISO/TC 94/SC 15.
Les séquences d'essais ont pour principe de réduire autant que possible le nombre d'échantillons
nécessaires en prévoyant des essais destructifs à la fin. Pour des raisons de sécurité, il est également
prévu que les essais faisant intervenir des sujets d'essai ne soient effectués qu'après que les échantillons
pour essai ont prouvé la sécurité de leur fonctionnement, lors d'autres essais.
© ISO 2021 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 17420-6:2021(F)
Appareils de protection respiratoire — Exigences de
performances —
Partie 6:
Application particulière d'évacuation - APR alimentés en
gaz respirable et APR filtrants
1 Domaine d'application
Le présent document spécifie les exigences pour les APR alimentés en gaz respirable et les APR filtrants
utilisés pour des applications particulières d'évacuation pour utilisation sur le lieu de travail afin de
protéger le porteur.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu'ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l'édition citée s'applique.
Pour les références non datées, la dernière édition du document de référence s'applique (y compris les
éventuels amendements).
ISO 8031, Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la résistance et de la
conductivité électriques
ISO 9227, Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins
ISO 16900-1:2019, Appareils de protection respiratoire — Méthodes d’essai et équipement d’essai —
Partie 1: Détermination des fuites vers l’intérieur
ISO 16900-4, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie
4: Détermination de la capacité d'un filtre à gaz et essais de migration, de désorption et dynamique au
monoxyde de carbone
ISO 16900-5, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 5:
Machine respiratoire, simulateur métabolique, têtes factices et torses APR, outils et outils de vérification
ISO 16900-6, Appareils de protection respiratoire — Méthodes d’essai et équipement d’essai —
Partie 6: Résistance mécanique — Résistance des composants
ISO 16900-8, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 8:
Mesurage des débit d'air des APR filtrants à ventilation assistée
ISO 16900-9, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 9:
Détermination de la teneur en dioxyde de carbone du gaz inhalé
ISO 16900-10, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 10:
Résistance à la combustion, à la flamme, à la chaleur radiante et à la chaleur
ISO 16900-12, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie
12: Détermination du travail respiratoire en fonction du volume respiratoire et détermination des pics de
pressions respiratoires
ISO 16972, Appareils de protection respiratoire — Vocabulaire et symboles graphiques
ISO 17420-1:2021, Appareils de protection respiratoire — Exigences de performances — Partie 1: Généralités
© ISO 2021 – Tous droits réservés 1

---------------------- Page: 6 ----------------------
ISO 17420-6:2021(F)

ISO 17420-2:2021, Appareils de protection respiratoire — Exigences de performances — Partie 2:
Dispositifs de filtration
ISO 17420-4:2021, Appareils de protection respiratoire — Exigences de performances — Partie 4:
Exigences pour les équipements de protection respiratoire alimentés en gaz respirable
ISO 23269-2:2011, Navires et technologie maritime — Appareils respiratoires pour les navires — Partie 2:
Appareils respiratoires autonomes pour les pompiers à bord de navires
IEC 60068-2-27:2010, Essais d’environnement — Partie 2-27: Essais — Essai Ea et guide: Chocs
IEC 60068-2-64:2009, Essais d’environnement — Partie 2-64: Essais — Essai Fh: Vibrations aléatoires à
large bande et guide
IEC 60079-0, Atmosphères explosives — Partie 0: Matériel — Exigences générales
IEC 60079-11, Atmosphères explosives — Partie 11: Protection de l’équipement par sécurité intrinsèque «i»
IEC 60079-32-1:2013, Atmosphères explosives — Partie 32-1: Dangers électrostatiques — Lignes directrices
IEC 60079-32-2:2015, Atmosphères explosives — Partie 32-2: Dangers électrostatiques — Essais
IEC 60721-1:2003, Classification des conditions d’environnement — Partie 1: Agents d’environnement et
leurs sévérités
IEC 60721-3-2:2018, Classification des conditions d’environnement — Partie 3-2: Classification des
groupements des agents d’environnement et de leurs sévérités — Transport et manutention
IEC 61000-6-2, Compatibilité électromagnétique (CEM) — Partie 6-2: Normes génériques — Immunité
pour les environnements industriels
EN 50303, Appareils du groupe I de catégorie M1 destinés à rester en opération dans les atmosphères
exposées au grisou et/ou à la poussière de charbon
3 Termes, définitions et abréviations
3.1 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO 16972 ainsi que les
suivants s'appliquent.
L'ISO et l'IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l'adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l'adresse http:// www .electropedia .org/
3.1.1
état non préconditionné
sans préconditionnement, mais éventuellement modifié pour effectuer des essais ou déjà utilisé dans
des essais non destructifs
Note 1 à l'article: Cela inclut, par exemple, le nettoyage et la désinfection.
2 © ISO 2021 – Tous droits réservés

---------------------- Page: 7 ----------------------
ISO 17420-6:2021(F)

3.1.2
APR tel qu'il est porté
APR où tous les composants sont connectés et assemblés de la manière dont ils sont destinés à être
utilisés (par exemple, porté par l'utilisateur, adapté à une tête factice pour APR ou à un ensemble tête
factice-torse pour APR, ou encore, à un support approprié)
Note 1 à l'article: Tous les différents composants (par exemple, pour un APR filtrant à ventilation assistée:
ventilateur, batterie, IR, filtres, etc.) sont entièrement assemblés, puis raccordés (IR raccordée au tuyau du
ventilateur) selon les informations fournies par le fabricant.
3.1.3
composant prêt à assembler
composant équipé de joints, d'obturateur, d'emballages ou d'autres moyens de protection contre
l'environnement toujours en place
3.1.4
APR prêt à assembler
APR équipé de joints, d'obturateurs ou d'autres moyens de protection contre l'environnement toujours
en place
Note 1 à l'article: En fonction des informations fournies par le fabricant concernant la mise en place de l'APR, des
actions complémentaires peuvent être nécessaires.
3.1.5
APR prêt à l'emploi
APR prêt à être mis en place comme décrit par le fabricant, mais avec les joints, obturateur ou autres
moyens de protection contre l'environnement déjà retirés
Note 1 à l'article: En fonction des informations fournies par le fabricant concernant la mise en place de l'APR, des
actions complémentaires peuvent être nécessaires.
Note 2 à l'article: Pour les dispositifs d'évacuation, cela comprend également l'APR dans son conteneur non ouvert.
3.2 Abréviations
IR Interface respiratoire
APR Appareil de protection respiratoire
V Volume courant
T
Travail respiratoire [Work of Brea-
WoB
thing]
4 Présentation des classifications
L'ISO 17420-2:2021, Article 4 ou l'ISO 17420-4:2021, Article 4 s'applique.
4.1 Généralités
L'ISO 17420-1:2021, 4.1 s'applique.
Le paragraphe suivant s'applique en plus de l'ISO 17420-2:2021, Article 4:
4.2 APR alimentés en gaz respirable pour évacuation
Les APR alimentés en gaz respirable peuvent également être classés pour une ou plusieurs applications
particulières, comme indiqué dans le Tableau 1.
© ISO 2021 – Tous droits réservés 3

---------------------- Page: 8 ----------------------
ISO 17420-6:2021(F)

Tableau 1 — Classification des applications particulières des APR alimentés en gaz respirable
Application particulière Classes
a
ES MN t (Évacuation en exploitation minière souterraine)
a
ES MA t (Évacuation en environnements maritimes)
Évacuation
a
ES FF t (Évacuation de lieux d'incendie)
a
ES t (Gaz respirable fourni pour évacuation générale)
a
Durée de fonctionnement nominale en t minutes, par exemple ES 15.
Exemple pour une application particulière d'évacuation avec classe de Protection (PC4), classe d'IR (dL)
et classe d'application particulière (ES 15).
EXEMPLE PC4 dL ES 15.
Le paragraphe suivant s'applique en plus de l'ISO 17420-2:2021, Article 4:
4.3 APR filtrants pour évacuation
Les APR filtrants peuvent également être classés pour une ou plusieurs applications particulières,
comme indiqué dans le Tableau 2.
Tableau 2 — Applications particulières des APR filtrants
Application particulière Classes
a
ES MN t (Évacuation en exploitation minière souterraine)
a
Évacuation ES FF t (Évacuation de lieux d'incendie)
b a
ES XX t (Filtration générale pour les évacuations)
a
Durée de fonctionnement nominale en «t» minutes, par exemple ES 10.
b
Type de gaz.
Exemple pour une application particulière d'évacuation générale avec classe de Protection (PC3), classe
d'IR (bT) et application particulière d'évacuation (ES), classe de performance de filtre à particules (F3)
classe de filtre anti-gaz (AC) et classe t (10).
EXEMPLE PC3 bT ES F3 AC10.
Les APR filtrants multi-fonctionnels ont une classification distincte pour chaque fonction, à savoir une
classification pour le mode sans assistance et une classification pour le mode assisté.
5 Exigences générales applicables aux APR
L'ISO 17420-1:2021, Article 5 et l'ISO 17420-2:2021, Article 5 ou l'ISO 17420-4:2021, Article 5
s'appliquent.
6 Exigences de base pour APR alimentés en gaz respirable et APR filtrants
Toutes les exigences de l'ISO 17420-2:2021, Article 6 ou de l'ISO 17420-4:2021, Article 6 s'appliquent à
moins d'être remplacées par le présent document et indiquées dans les articles pertinents.
NOTE 1 Des fonctionnalités optionnelles sont également indiquées dans l'ISO 17420-2 ou l'ISO 17420-4.
NOTE 2 Lorsque des exigences sont remplacées par celles de l'Article 7 du présent document, les programmes
d'essais donnés dans l'ISO 17420-2:2021, Annexe C ou l'ISO 17420-4:2021, Annexe C peuvent être utilisés comme
lignes directrices.
4 © ISO 2021 – Tous droits réservés

---------------------- Page: 9 ----------------------
ISO 17420-6:2021(F)

7 Application particulière pour APR d'évacuation alimentés en gaz respirable
et APR d'évacuation filtrants
7.1 APR pour application particulière d'évacuation — Matrices d'exigences
7.1.1 Généralités
Les APR d'évacuation alimentés en gaz respirable doivent satisfaire aux exigences spécifiées dans le
Tableau 3.
Les APR d'évacuation filtrants doivent satisfaire aux exigences données dans le Tableau 4.
7.1.2 APR alimentés en gaz respirable — Évacuation
Le Tableau 3 donne une vue d'ensemble des exigences et du préconditionnement des APR alimentés en
gaz respirable pour application particulière — Évacuation.
Pour chaque ligne du tableau, au moins un APR doit être soumis à essai après le préconditionnement ou
l'ensemble de préconditionnements requis en cas d'association par le signe «&». Les préconditionnements
combinés doivent être réalisés dans l'ordre spécifié.
Le Tableau 3 doit être interprété de la manière suivante:
Les exigences sont données dans la première colonne. Le préconditionnement requis pour différentes
classes d'évacuation est spécifié dans la troisième à la sixième colonne.
Les exigences sont intitulées dans la deuxième colonne.
Différents échantillons doivent être utilisés pour chaque préconditionnement dans une rangée de la
cellule.
Pour l'exigence 7.2.10.1 et la classe d'évacuation en environnements maritimes, les exigences suivantes
s'appliquent:
Au moins un échantillon doit être préconditionné TH&VSS&IE (Exposition à la température et
à l'humidité, exposition aux vibrations et aux chocs — environnements marins et exposition
intermittente).
Au moins un échantillon supplémentaire doit être préconditionné DR (Exposition aux chocs dus aux
chutes).
Pour le nombre total d'échantillon, voir l'ISO 17420-1:2021, 5.1.
© ISO 2021 – Tous droits réservés 5

---------------------- Page: 10 ----------------------
ISO 17420-6:2021(F)

Tableau 3 — Vue d'ensemble des exigences d'applications particulières — APR alimentés en gaz
respirable — Évacuation
APR alimen-
tés en gaz Évacuation en
Évacuation Évacuation en
respirable exploitation
de lieux environnements
pour éva- minière souter-
d'incendie maritimes
cuation raine
générale
Exigence Titre
a a a a
ES t ES FF t ES MA t ES MN t
Classe de Classe de Classe de protec- Classe de protec-
protection protection tion tion
≥PC3 ≥PC3 ≥PC3 ≥PC3
Préconditionnement
Exposition à la pous-
b b b b
7.2.1 X X X X
sière
Contact avec les
surfaces chaudes et
c
7.2.2.1 froides — APR d'éva- TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
cuation alimentés en
gaz respirable
Absence d'étincelles par
7.2.3 AR/NP AR/NP AR/NP AR/NP
frottement
Essai dynamique à six
d
7.2.4.1 — AR AR AR
brûleurs
d d
Sécurité intrinsèque – — —
d
7.2.6.2 AR/NP —
Lutte contre les feux
d d d
Sécurité intrinsèque – — — —
7.2.6.3 AR/NP
Exploitation minière
d d
Sécurité intrinsèque – — —
7.2.6.4 AR/NP —
Environnements marins
d
Propriétés antista- —
7.2.7.1 AR/NP AR/NP AR/NP
tiques - Généralités
d d d
Propriétés antistatiques — — —
7.2.7.2 AR/NP
- Lutte contre les feux
d d d
Propriétés antistatiques — — —
7.2.7.3 AR/NP
- Exploitation minière
a
  Durée de fonctionnement nominale en «t» min, voir également 7.2.9.1.
b
  X signifie que l'exposition à la poussière doit être traitée via l'AMDEC (voir 7.2.1).
c
  Sera déterminée durant la validation du programme de performance de l'APR d'évacuation spécifié en 7.2.10.
d
  — signifie qu'un essai n'est pas nécessaire pour cette combinaison d'exigence et de classe d'application particulière.
AR tel que reçu.
AR/NP tel que reçu ou à l'état non préconditionné.
TH&VS&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs (ISO 17420-4:2021, 6.11.1.1.3) et exposition intermittente au brouillard salin (7.3.3).
TH&VSF&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs-lutte contre les feux (ISO 17420-5:—, 7.3.2) et exposition intermittente au brouillard salin (7.3.3).
TH&VSS&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs-environnements marins (7.3.5) et exposition intermittente au brouillard salin (7.3.3).
TH&VSM&PR&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations
et aux chocs-exploitation minière (7.3.6), résistance aux changements de pression atmosphérique (7.3.2) et exposition
intermittente au brouillard salin (7.3.3).
DR Exposition aux chocs dus aux chutes (7.3.1).
6 © ISO 2021 – Tous droits réservés

---------------------- Page: 11 ----------------------
ISO 17420-6:2021(F)

Tableau 3 (suite)
d
Propriétés antista- —
7.2.7.4 tiques – Flexibles AR/NP AR/NP AR/NP
d'APR exposés
Irritation oculaire
7.2.8 AR/NP AR/NP AR/NP AR/NP
(externe)
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Détermination de la
7.2.9.2
durée de fonction-
DR DR DR DR
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Validation des exi-
7.2.10.1
gences de performance
DR DR DR DR
7.2.10.4 Mise en place et retrait AR/NP AR/NP AR/NP AR/NP
a
  Durée de fonctionnement nominale en «t» min, voir également 7.2.9.1.
b
  X signifie que l'exposition à la poussière doit être traitée via l'AMDEC (voir 7.2.1).
c
  Sera déterminée durant la validation du programme de performance de l'APR d'évacuation spécifié en 7.2.10.
d
  — signifie qu'un essai n'est pas nécessaire pour cette combinaison d'exigence et de classe d'application particulière.
AR tel que reçu.
AR/NP tel que reçu ou à l'état non préconditionné.
TH&VS&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs (ISO 17420-4:2021, 6.11.1.1.3) et exposition intermittente au brouillard salin (7.3.3).
TH&VSF&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs-lutte contre les feux (ISO 17420-5:—, 7.3.2) et exposition intermittente au brouillard salin (7.3.3).
TH&VSS&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations et aux
chocs-environnements marins (7.3.5) et exposition intermittente au brouillard salin (7.3.3).
TH&VSM&PR&IE Exposition à la température et à l'humidité (ISO 17420-4:2021, 6.11.1.1.2), exposition aux vibrations
et aux chocs-exploitation minière (7.3.6), résistance aux changements de pression atmosphérique (7.3.2) et exposition
intermittente au brouillard salin (7.3.3).
DR Exposition aux chocs dus aux chutes (7.3.1).
7.1.3 APR d'évacuation filtrants
Le Tableau 4 donne une vue d'ensemble des exigences et du préconditionnement des APR filtrants.
Au moins un APR doit être soumis à essai après chaqu
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17420-6
ISO/TC 94/SC 15
Respiratory protective devices —
Secretariat: DIN
Performance requirements —
Voting begins on:
2020-11-16
Part 6:
Voting terminates on:
Special application escape - Filtering
2021-01-11
RPD and supplied breathable gas RPD
Appareils de protection respiratoire — Exigences de performances —
Partie 6: Application particulière d'évacuation - APR filtrants et APR
alimentés en gaz respirable
Member bodies are requested to consult relevant national interests in ISO/TC
94/SC 14 before casting their ballot to the e-Balloting application.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 17420-6:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2020

---------------------- Page: 1 ----------------------
ISO/FDIS 17420-6:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 17420-6:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviations . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 3
4 Classification overview . 3
4.1 General . 3
4.2 Supplied breathable gas RPD for escape . 3
4.3 Filtering RPD for escape . 4
5 General requirements for RPD . 4
6 Basic requirements for supplied breathable gas RPD and filtering RPD .4
7 Special application for supplied breathable gas escape RPD and filtering escape RPD .4
7.1 Special application escape RPD - Requirement matrices . 4
7.1.1 General. 4
7.1.2 Supplied breathable gas RPD — Escape . 4
7.1.3 Filtering escape RPD . . 6
7.2 Requirements for special application escape RPD . 8
7.2.1 Exposure to dust . 8
7.2.2 Contact with hot or cold surfaces generated by the RPD . 8
7.2.3 Avoidance of frictional sparks - Filtering escape RPD and supplied
breathable gas escape RPD . 9
7.2.4 Resistance to flame . 9
7.2.5 Mechanical Requirement .10
7.2.6 Requirements for escape RPD used in explosive atmospheres and
electromagnetic compatibility .10
7.2.7 Antistatic properties - Filtering escape RPD and supplied breathable gas
escape RPD . .11
7.2.8 Eye irritation (external) - Filtering escape RPD and supplied breathable
gas escape RPD .11
7.2.9 Determination of duration .12
7.2.10 Validation of escape RPD performance requirements .14
7.3 Pre-conditioning .28
7.3.1 Exposure to impact from drop — Filtering escape RPD and supplied
breathable gas escape RPD .28
7.3.2 Resistance to changes in atmospheric pressure .28
7.3.3 Intermittent exposure to salt spray .28
7.3.4 Exposure to vibration and shock for supplied breathable gas escape RPD .29
7.3.5 Exposure to vibration and shock - marine .29
7.3.6 Exposure to vibration and shock - mining .30
7.3.7 Filtering escape RPD . .31
8 Inspection .31
8.1 General .31
8.2 Inspection .31
8.3 Testing of leak tightness using positive pressure .32
9 Marking .32
10 Information supplied by the manufacturer .32
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 17420-6:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 94, Personal safety – Personal protective
equipment, Subcommittee SC 15, Respiratory protective devices.
A list of all parts in the ISO 17420 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/FDIS 17420-6:2020(E)

Introduction
This document describes requirements for RPD including its elements and components used for special
applications for escape devices.
Some test methods are described. For other test methods references are given to the ISO 16900 series
"Methods of test and test equipment" or other test methods not developed by ISO/TC 94/SC 15.
The sequence of testing follows the principle to minimize the necessary number of samples by carrying
out destructive tests at the end. It also includes for safety reason that tests with test subjects are only
carried out after the test samples have shown their safe performance in other tests.
© ISO 2020 – All rights reserved v

---------------------- Page: 5 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 17420-6:2020(E)
Respiratory protective devices — Performance
requirements —
Part 6:
Special application escape - Filtering RPD and supplied
breathable gas RPD
1 Scope
This document specifies the requirements for supplied breathable gas RPD and for filtering RPD to be
used for special application escape for use in the workplace to protect the wearer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 8031, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and
conductivity
ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests
ISO 16900-1:2014, Respiratory protective devices — Methods of test and test equipment — Part 1:
Determination of inward leakage
ISO 16900-4, Respiratory protective devices — Methods of test and test equipment — Part 4: Determination
of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
ISO 16900-5, Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing
machine, metabolic simulator, RPD headforms and torso, tools and verification tools
ISO 16900-6, Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical
resistance/strength of components and connections
ISO 16900-8, Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement
of RPD air flow rates of assisted filtering RPD
ISO 16900-9, Respiratory protective devices — Methods of test and test equipment — Part 9: Determination
of carbon dioxide content of the inhaled gas
ISO 16900-10, Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance
to ignition, flame, radiant heat and heat
ISO 16900-12, Respiratory protective devices — Methods of test and test equipment — Part 12:
Determination of volume-averaged work of breathing and peak respiratory pressures
ISO 16972, Respiratory protective devices — Vocabulary and graphical symbols
ISO 17420-1:—, Respiratory protective devices — Performance requirements — Part 1: General
ISO 17420-2:—, Respiratory protective devices — Performance requirements — Part 2: Requirements for
filtering RPD
© ISO 2020 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO/FDIS 17420-6:2020(E)

ISO 17420-4:—, Respiratory protective devices — Performance requirements — Part 4: Requirements for
supplied breathable gas RPD
ISO 23269-2:2011, Ships and marine technology — Breathing apparatus for ships — Part 2: Self-contained
breathing apparatus for shipboard firefighters
IEC 60068-2-27:2010, Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock
IEC 60068-2-64:2009, Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband random
and guidance
IEC 60079-0, Explosive atmospheres — Part 0: Equipment — General requirements
IEC 60079-11, Explosive atmospheres — Part 11: Equipment protection by intrinsic safety “i”
IEC 60079-32-1:2013, Explosive atmospheres — Part 32-1: Electrostatics hazards — Guidance
IEC 60079-32-2:2015, Explosive atmospheres — Part 32-2: Electrostatics hazards — Tests
IEC 60721-1:2003, Classification of environmental conditions — Part 1: Environmental parameters and
their severities
IEC 60721-3-2:2018, Classification of environmental conditions — Part 3-2: Classification of groups of
environmental parameters and their severities — Transportation and Handling
IEC 61000-6-2, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity standard
for industrial environments
EN 50303, Group 1, category M1 equipment intended to remain functional in atmospheres endangered by
firedamp and/or coal dust
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 16972 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1.1
non pre-conditioned state
without pre-conditioning but possibly modified to carry out tests or already used in non-destructive tests
Note 1 to entry: This includes e.g. cleaning and disinfection.
3.1.2
RPD in as worn state
RPD where all components are connected and assembled in the way that it is intended to be used (e.g.
worn by the wearer, adapted to an RPD headform or RPD headform and torso or suitable holder).
Note 1 to entry: All of the various components (e.g. for an assisted filtering RPD: blower unit, battery, RI, filters,
etc.) have been completely assembled and then connected (RI connected to the hose of the blower unit) together
in accordance with the information supplied by the manufacturer.
3.1.3
component in ready for assembly state
component with seals, plugs, packaging or other environmental protective means, still in place
2 © ISO 2020 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/FDIS 17420-6:2020(E)

3.1.4
RPD in ready for assembly state
RPD with seals, plug, or other environmental protective means, still in place
Note 1 to entry: In line with the information supplied by the manufacturer for donning the RPD, further actions
can be necessary.
3.1.5
RPD in ready for use state
RPD ready to be donned as described by the manufacturer, but seals, plug, or other environmental
protective means are already removed
Note 1 to entry: In line with the information supplied by the manufacturer for donning the RPD, further actions
can be necessary.
Note 2 to entry: For escape devices this includes also the RPD in its container unopened.
3.2 Abbreviated terms
RI Respiratory Interface
RPD Respiratory Protective Devices
V Tidal volume
T
WoB Work of Breathing
4 Classification overview
ISO 17420-2:—, Clause 4 or ISO 17420-4:—, Clause 4 applies.
4.1 General
ISO 17420-1:—, 4.1 applies.
The following subclause applies in addition to ISO 17420-2:—, Clause 4:
4.2 Supplied breathable gas RPD for escape
In addition, supplied breathable gas RPD may be classified for one or more special applications, as given
in Table 1.
Table 1 — Special application classification supplied breathable gas RPD
Special application Classes
a
ES MN t (Underground mining escape)
a
ES MA t (Marine escape)
Escape
a
ES FF t (Escape from fire)
a
ES t (Escape general supplied breathable gas)
a
Nominal service life in t minutes, e.g. ES 15.
Example for a special application escape with Protection class (PC4), RI class (dL) and special application
class (ES 15).
EXAMPLE PC4 dL ES 15.
The following subclause applies in addition to ISO 17420-2:—, Clause 4.
© ISO 2020 – All rights reserved 3

---------------------- Page: 8 ----------------------
ISO/FDIS 17420-6:2020(E)

4.3 Filtering RPD for escape
In addition, filtering RPD may be classified for one or more special applications, as given in Table 2.
Table 2 — Special application classification of filtering RPD
Special application Classes
a
ES MN t (Underground Mining Escape)
a
Escape ES FF t (Escape from fire)
b a
ES XX t (Escape general filtering)
a
Nominal service life in "t" minutes, e.g. ES 10.
b
Gas type.
Example for a special application escape general with Protection class (PC3), RI class (bT) and special
application escape (ES), particle filter performance class (F3) and gas filter class (AC) and class t (10).
EXAMPLE PC3 bT ES F3 AC10.
Multi-functional filtering RPD have separate classifications for each function, i.e. one classification for
the unassisted mode and one classification for the assisted mode.
5 General requirements for RPD
ISO 17420-1: —, Clause 5 and ISO 17420-2: —, Clause 5 or ISO 17420-4: —, Clause 5 apply.
6 Basic requirements for supplied breathable gas RPD and filtering RPD
All requirements of ISO 17420-2: —, Clause 6 or ISO 17420-4: —, Clause 6 apply unless superseded by
this document and indicated in the relevant clauses.
NOTE 1 Optional features are also given in ISO 17420-2 or ISO 17420-4.
NOTE 2 Where requirements are superseded by those in Clause 7 of this document test schedules given in
ISO 17420-2: —, Annex C or ISO 17420-4: —, Annex C can be used as a guideline.
7 Special application for supplied breathable gas escape RPD and filtering
escape RPD
7.1 Special application escape RPD - Requirement matrices
7.1.1 General
Supplied breathable gas escape RPD shall fulfil all requirements given in Table 3
Filtering escape RPD shall fulfil all requirements given in Table 4.
7.1.2 Supplied breathable gas RPD — Escape
Table 3 gives an overview about requirements and preconditioning of special application supplied
breathable gas RPD — Escape.
For each line in the table, at least one RPD shall be tested after the required preconditioning or set of
pre-conditionings where combined by “&”. Combined preconditioning shall be completed in the order
specified.
Table 3 shall be read as follows:
4 © ISO 2020 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/FDIS 17420-6:2020(E)

In the first column the requirements are given. In the third to sixth column the required pre-
conditioning for different escape classes are given.
For each pre-conditioning within one line of the cell different sample(s) shall be used.
For the requirement 7.2.10.1.1 and class marine escape the following applies:
At least one sample shall be preconditioned TH&VSS&IE (Exposure to temperature and humidity,
exposure to vibration and shock – marine and intermittend exposure).
At least one further sample shall be preconditioned DR (Exposure to impact from drop)
For the total number of samples see ISO 17420-1: —, 5.1.
Table 3 — Special application requirement overview — Supplied breathable gas RPD — Escape
Supplied
breathable Escape Marine Underground
gas escape from fire escape mining escape
general
a a a a
ES t ES FF t ES MA t ES MN t
Requirement Title
Protection Protection Protection
Protection class
class class class
≥PC3
≥PC3 ≥PC3 ≥PC3
Pre-conditioning
b b b b
7.2.1 Exposure to dust X X X X
Contact with hot and cold
c
7.2.2.1 surfaces – Supplied breath- TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
able gas escape RPD
7.2.3 Avoidance of frictional sparks AR/NP AR/NP AR/NP AR/NP
d
7.2.4.1 Six burner dynamic — AR AR AR
d d d
7.2.6.2 Intrinsic Safety – Firefighting — AR/NP — —
d d d
7.2.6.3 Intrinsic Safety – Mining — — — AR/NP
d d
7.2.6.4 Intrinsic Safety – Marine — — AR/NP —
d
Antistatic properties - Gen- —
7.2.7.1 AR/NP AR/NP AR/NP
eral
d d d
Antistatic properties – — — —
7.2.7.2 AR/NP
Fire-fighting
d d d
7.2.7.3 Antistatic properties - Mining — — — AR/NP
a
Nominal service life in “t” min, see also 7.2.9.1.
b
X means exposure to dust has to be addressed by the FMEA (see 7.2.1).
c
Will be determined during the validation of escape RPD performance regime specified in 7.2.10.
d
— means that a test is not required for this combination of requirement and special application class.
AR as received.
AR/NP as received or in non pre-conditioned state.
TH&VS&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock
(ISO 17420-4:—, 6.11.1.1.3 ) and intermittent exposure (7.3.3).
TH&VSF&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock-fire
fighting ( ISO 17420-5:201x, 7.2.2) and intermittent exposure (7.3.3).
TH&VSS&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock marine
(7.3.5 ) and intermittent exposure (7.3.3).
TH&VSM&PR&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2), exposure to vibration and shock
mining (7.3.6 ), resistance to changes in atmospheric pressure (7.3.2) and intermittent exposure (7.3.3).
DR Exposure to impact from drop (7.3.1).
© ISO 2020 – All rights reserved 5

---------------------- Page: 10 ----------------------
ISO/FDIS 17420-6:2020(E)

Table 3 (continued)
d
Antistatic properties - Ex- —
7.2.7.4 AR/NP AR/NP AR/NP
posed RPD hoses
7.2.8 Eye irritation (external) AR/NP AR/NP AR/NP AR/NP
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Determination of duration
7.2.9.2
(t) of Escape RPD
DR DR DR DR
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Validation of escape RPD
7.2.10.1.1
performance requirements
DR DR DR DR
7.2.10.4 Donning and doffing AR/NP AR/NP AR/NP AR/NP
a
Nominal service life in “t” min, see also 7.2.9.1.
b
X means exposure to dust has to be addressed by the FMEA (see 7.2.1).
c
Will be determined during the validation of escape RPD performance regime specified in 7.2.10.
d
— means that a test is not required for this combination of requirement and special application class.
AR as received.
AR/NP as received or in non pre-conditioned state.
TH&VS&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock
(ISO 17420-4:—, 6.11.1.1.3 ) and intermittent exposure (7.3.3).
TH&VSF&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock-fire
fighting ( ISO 17420-5:201x, 7.2.2) and intermittent exposure (7.3.3).
TH&VSS&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2 ), exposure to vibration and shock marine
(7.3.5 ) and intermittent exposure (7.3.3).
TH&VSM&PR&IE Exposure to temperature and humidity (ISO 17420-4:—, 6.11.1.1.2), exposure to vibration and shock
mining (7.3.6 ), resistance to changes in atmospheric pressure (7.3.2) and intermittent exposure (7.3.3).
DR Exposure to impact from drop (7.3.1).
7.1.3 Filtering escape RPD
Table 4 gives an overview about requirements and preconditioning of filtering RPD.
At least one RPD shall be tested after each required preconditioning. Pre-conditionings shall not be
combined.
Table 4 shall be read as follows:
In the first column the requirements are given. In the third to sixth column the required pre-
conditioning for different escape classes are given.
For each pre-conditioning within one line of the cell different sample(s) shall be used.
For the requirement 7.2.10.6.3 and class mining escape the following applies:
At least one sample shall be preconditioned VSM&PR&IE (Vibration and shock –mining, exposure to
positive pressure and intermittent exposure)
At least one further sample shall be preconditioned DR (Exposure to impact from drop)
For the total number of samples see ISO 17420-1:—, 5.1.
6 © ISO 2020 – All rights reserved

---------------------- Page: 11 ----------------------
ISO/FDIS 17420-6:2020(E)

Table 4 — Special application requirement overview — Filtering RPD — Escape
Filtering es- Escape Underground
cape general from fire mining escape
a b b b
ES XX t ES FF t ES MN t
Requirement Title Protection Protection
Protection class
class class
≥PC3
≥PC3 ≥PC3
Pre-conditioning
c c c
7.2.1 Exposure to dust X X X
TH&MR
Contact with hot surfaces - Filtering
d
7.2.2.2 TH&VSF TH&VSM&PR&IE
escape RPD
DR
e
7.2.3 Avoidance of frictional sparks — AR AR
e
7.2.4.1 Six burner dynamic — AR AR
e e
7.2.6.2 Intrinsic Safety – Firefighting — AR —
e e
7.2.6.3 Intrinsic Safety – Mining — — AR
7.2.7.1 Antistatic properties - General AR AR AR
e e
7.2.7.2 Antistatic properties Firefighting — AR —
e e
7.2.7.3 Antistatic properties - Mining — — AR
e
7.2.7.4 Antistatic properties - Exposed RPD hoses — AR AR
7.2.8 Eye irritation (external) AR AR AR
TH&MR TH&VSF TH&VSM&PR
Determination of duration (t) of filtering
7.2.9.3
escape RPD
DR DR DR
TH&MR&IE TH&VSF&IE TH&VSM&PR&IE
Performance of work of breathing /
7.2.10.2.1
breathing resistance/ elastance for un-
DR DR DR
TH&MR&IE TH&VSF TH&VSM&PR&IE
Performance of work of breathing/breath-
7.2.10.2.2
ing resistance/elastance for assisted
DR DR DR
7.2.10.3 CO concentration limits AR AR AR
2
7.2.10.4 Donning and doffing AR/NP AR/NP AR/NP
a
Gas type.
b
nominal service life in “t” min, see also 7.2.9.1.
c
X means exposure to dust has to be addressed by the FMEA (7.2.1).
d
Will be determined during the performance of work of breathing/breathing resistance/elastance for unassisted
(7.2.10.2.1) or assisted escape RPD (7.2.10.2.2).
e
— means that a test is not required for this combination of requirement and special application class.
AR as received (or in non pre-conditioned state).
DR Exposure to impact from drop- escape RPD (7.3.1).
TH&MR Exposure to temperature and humidity (ISO 17420-2:—, 6.11.1.1.2), Mechanical resis
...

PROJET
NORME ISO/FDIS
FINAL
INTERNATIONALE 17420-6
ISO/TC 94/SC 15
Appareils de protection
Secrétariat: DIN
respiratoire — Exigences de
Début de vote:
2020-11-16 performances —
Vote clos le:
Partie 6:
2021-01-11
Application particulière d'évacuation
- APR alimentés en gaz respirable et
APR filtrants
Respiratory protective devices — Performance requirements —
Part 6: Special application escape - Filtering RPD and supplied
breathable gas RPD
Il est demandé aux comités membres de consulter les intérêts nationaux
respectifs concernant l’ISO/TC 94/SC 14 avant de donner leur position sur la
plateforme de e-Balloting.
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSER-
VATIONS, NOTIFICATION DES DROITS DE PRO-
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT
CONNAISSANCE ET À FOURNIR UNE DOCUMEN-
TATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-
Numéro de référence
MERCIALES, AINSI QUE DU POINT DE VUE
ISO/FDIS 17420-6:2020(F)
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR POSSI-
BILITÉ DE DEVENIR DES NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTA-
©
TION NATIONALE. ISO 2020

---------------------- Page: 1 ----------------------
ISO/FDIS 17420-6:2020(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2020 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/FDIS 17420-6:2020(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes, définitions et abréviations . 2
3.1 Termes et définitions . 2
3.2 Abréviations . 3
4 Présentation des classifications . 3
4.1 Généralités . 3
4.2 APR alimentés en gaz respirable pour évacuation . 3
4.3 APR filtrants pour évacuation . 4
5 Exigences générales applicables aux APR . 4
6 Exigences de base pour APR alimentés en gaz respirable et APR filtrants .4
7 Application particulière pour APR d'évacuation alimentés en gaz respirable et APR
d'évacuation filtrants . 5
7.1 APR pour application particulière d'évacuation — Matrices d'exigences. 5
7.1.1 Généralités . 5
7.1.2 APR alimentés en gaz respirable — Évacuation . 5
7.1.3 APR d'évacuation filtrants . 7
7.2 Exigences pour les APR pour application particulière d'évacuation . 9
7.2.1 Exposition à la poussière . 9
7.2.2 Contact avec les surfaces chaudes ou froides générées par l'APR .10
7.2.3 Absence d'étincelles par frottement — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .10
7.2.4 Résistance à la flamme . .10
7.2.5 Exigences mécaniques .11
7.2.6 Exigences relatives aux APR d'évacuation utilisés dans des atmosphères
explosives et compatibilité électromagnétique . .11
7.2.7 Propriétés antistatiques — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .12
7.2.8 Irritation oculaire (externe) — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .13
7.2.9 Détermination de la durée de fonctionnement .13
7.2.10 Validation des exigences de performance de l'APR d'évacuation .16
7.3 Préconditionnement .29
7.3.1 Exposition aux chocs dus aux chutes — APR d'évacuation filtrants et APR
d'évacuation alimentés en gaz respirable .29
7.3.2 Résistance aux changements de pression atmosphérique .29
7.3.3 Exposition intermittente au brouillard salin .30
7.3.4 Exposition aux vibrations et aux chocs pour APR d'évacuation alimentés
en gaz respirable .30
7.3.5 Exposition aux vibrations et aux chocs — Environnement marins .30
7.3.6 Exposition aux vibrations et aux chocs — Exploitation minière .31
7.3.7 APR d'évacuation filtrants .32
8 Inspection .32
8.1 Généralités .32
8.2 Inspection .32
8.3 Essai d'étanchéité par pression positive.33
9 Marquage .33
10 Informations fournies par le fabricant .33
© ISO 2020 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO/FDIS 17420-6:2020(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/ iso/ fr/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 94, Sécurité individuelle — Équipement
de protection individuelle, sous-comité SC 15, Appareils de protection respiratoire.
Une liste de toutes les parties de la série ISO 17420 se trouve sur le site web de l'ISO.
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l'adresse www .iso .org/ fr/ members .html.
iv © ISO 2020 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO/FDIS 17420-6:2020(F)

Introduction
Le présent document décrit les exigences relatives aux APR, y compris ses éléments et composants,
utilisés pour des applications particulières de dispositifs d'évacuation.
Certaines méthodes d'essai sont décrites. Pour les autres méthodes d'essai, il est fait référence à la série
ISO 16900, «Méthodes d'essai et équipement d'essai» ou à d'autres méthodes d'essai non élaborées par
l'ISO/TC 94/SC 15.
Les séquences d'essais ont pour principe de réduire autant que possible le nombre d'échantillons
nécessaires en prévoyant des essais destructifs à la fin. Pour des raisons de sécurité, il est également
prévu que les essais faisant intervenir des sujets d'essai ne soient effectués qu'après que les échantillons
pour essai ont prouvé la sécurité de leur fonctionnement, lors d'autres essais.
© ISO 2020 – Tous droits réservés v

---------------------- Page: 5 ----------------------
PROJET FINAL DE NORME INTERNATIONALE ISO/FDIS 17420-6:2020(F)
Appareils de protection respiratoire — Exigences de
performances —
Partie 6:
Application particulière d'évacuation - APR alimentés en
gaz respirable et APR filtrants
1 Domaine d'application
Le présent document spécifie les exigences pour les APR alimentés en gaz respirable et les APR filtrants
utilisés pour des applications particulières d'évacuation pour utilisation sur le lieu de travail afin de
protéger le porteur.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu'ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l'édition citée s'applique.
Pour les références non datées, la dernière édition du document de référence s'applique (y compris les
éventuels amendements).
ISO 8031, Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la résistance et de la
conductivité électriques
ISO 9227, Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins
ISO 16900-1:2014, Appareils de protection respiratoire — Méthodes d’essai et équipement d’essai —
Partie 1: Détermination des fuites vers l’intérieur
ISO 16900-4, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie
4: Détermination de la capacité d'un filtre à gaz et essais de migration, de désorption et dynamique au
monoxyde de carbone
ISO 16900-5, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 5:
Machine respiratoire, simulateur métabolique, têtes factices et torses APR, outils et outils de vérification
ISO 16900-6, Appareils de protection respiratoire — Méthodes d’essai et équipement d’essai —
Partie 6: Résistance mécanique — Résistance des composants
ISO 16900-8, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 8:
Mesurage des débit d'air des APR filtrants à ventilation assistée
ISO 16900-9, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 9:
Détermination de la teneur en dioxyde de carbone du gaz inhalé
ISO 16900-10, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie 10:
Résistance à la combustion, à la flamme, à la chaleur radiante et à la chaleur
ISO 16900-12, Appareils de protection respiratoire — Méthodes d'essai et équipement d'essai — Partie
12: Détermination du travail respiratoire en fonction du volume respiratoire et détermination des pics de
pressions respiratoires
ISO 16972, Appareils de protection respiratoire — Vocabulaire et symboles graphiques
ISO 17420-1:—, Appareils de protection respiratoire — Exigences de performances — Partie 1: Généralités
© ISO 2020 – Tous droits réservés 1

---------------------- Page: 6 ----------------------
ISO/FDIS 17420-6:2020(F)

ISO 17420-2:—, Appareils de protection respiratoire — Exigences de performances — Partie 2: Dispositifs
de filtration
ISO 17420-4:—, Appareils de protection respiratoire — Exigences de performances — Partie 4: Exigences
pour les équipements de protection respiratoire alimentés en gaz respirable
ISO 23269-2:2011, Navires et technologie maritime — Appareils respiratoires pour les navires — Partie 2:
Appareils respiratoires autonomes pour les pompiers à bord de navires
IEC 60068-2-27:2010, Essais d’environnement — Partie 2-27: Essais — Essai Ea et guide: Chocs
IEC 60068-2-64:2009, Essais d’environnement — Partie 2-64: Essais — Essai Fh: Vibrations aléatoires à
large bande et guide
IEC 60079-0, Atmosphères explosives — Partie 0: Matériel — Exigences générales
IEC 60079-11, Atmosphères explosives — Partie 11: Protection de l’équipement par sécurité intrinsèque «i»
IEC 60079-32-1:2013, Atmosphères explosives — Partie 32-1: Dangers électrostatiques — Lignes directrices
IEC 60079-32-2:2015, Atmosphères explosives — Partie 32-2: Dangers électrostatiques — Essais
IEC 60721-1:2003, Classification des conditions d’environnement — Partie 1: Agents d’environnement et
leurs sévérités
IEC 60721-3-2:2018, Classification des conditions d’environnement — Partie 3-2: Classification des
groupements des agents d’environnement et de leurs sévérités — Transport et manutention
IEC 61000-6-2, Compatibilité électromagnétique (CEM) — Partie 6-2: Normes génériques — Immunité
pour les environnements industriels
EN 50303, Appareils du groupe I de catégorie M1 destinés à rester en opération dans les atmosphères
exposées au grisou et/ou à la poussière de charbon
3 Termes, définitions et abréviations
3.1 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO 16972 ainsi que les
suivants s'appliquent.
L'ISO et l'IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l'adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l'adresse http:// www .electropedia .org/
3.1.1
état non préconditionné
sans préconditionnement, mais éventuellement modifié pour effectuer des essais ou déjà utilisé dans
des essais non destructifs
Note 1 à l'article: Cela inclut, par exemple, le nettoyage et la désinfection.
2 © ISO 2020 – Tous droits réservés

---------------------- Page: 7 ----------------------
ISO/FDIS 17420-6:2020(F)

3.1.2
APR tel qu'il est porté
APR où tous les composants sont connectés et assemblés de la manière dont ils sont destinés à être
utilisés (par exemple, porté par l'utilisateur, adapté à une tête factice pour APR ou à un ensemble tête
factice-torse pour APR, ou encore, à un support approprié)
Note 1 à l'article: Tous les différents composants (par exemple, pour un APR filtrant à ventilation assistée:
ventilateur, batterie, IR, filtres, etc.) sont entièrement assemblés, puis raccordés (IR raccordée au tuyau du
ventilateur) selon les informations fournies par le fabricant.
3.1.3
composant prêt à assembler
composant équipé de joints, d'obturateur, d'emballages ou d'autres moyens de protection contre
l'environnement toujours en place
3.1.4
APR prêt à assembler
APR équipé de joints, d'obturateurs ou d'autres moyens de protection contre l'environnement toujours
en place
Note 1 à l'article: En fonction des informations fournies par le fabricant concernant la mise en place de l'APR, des
actions complémentaires peuvent être nécessaires.
3.1.5
APR prêt à l'emploi
APR prêt à être mis en place comme décrit par le fabricant, mais avec les joints, obturateur ou autres
moyens de protection contre l'environnement déjà retirés
Note 1 à l'article: En fonction des informations fournies par le fabricant concernant la mise en place de l'APR, des
actions complémentaires peuvent être nécessaires.
Note 2 à l'article: Pour les dispositifs d'évacuation, cela comprend également l'APR dans son conteneur non ouvert.
3.2 Abréviations
IR Interface respiratoire
APR Appareil de protection respiratoire
V Volume courant
T
Travail respiratoire [Work of Brea-
WoB
thing]
4 Présentation des classifications
L'ISO 17420-2:—, Article 4 ou l'ISO 17420-4:—, Article 4 s'applique.
4.1 Généralités
L'ISO 17420-1:—, 4.1 s'applique.
Le paragraphe suivant s'applique en plus de l'ISO 17420-2:—, Article 4:
4.2 APR alimentés en gaz respirable pour évacuation
Les APR alimentés en gaz respirable peuvent également être classés pour une ou plusieurs applications
particulières, comme indiqué dans le Tableau 1.
© ISO 2020 – Tous droits réservés 3

---------------------- Page: 8 ----------------------
ISO/FDIS 17420-6:2020(F)

Tableau 1 — Classification des applications particulières des APR alimentés en gaz respirable
Application particulière Classes
a
ES MN t (Évacuation en exploitation minière souterraine)
a
ES MA t (Évacuation en environnements maritimes)
Évacuation
a
ES FF t (Évacuation de lieux d'incendie)
a
ES t (Gaz respirable fourni pour évacuation générale)
a
Durée de fonctionnement nominale en t minutes, par exemple ES 15.
Exemple pour une application particulière d'évacuation avec classe de Protection (PC4), classe d'IR (dL)
et classe d'application particulière (ES 15).
EXEMPLE PC4 dL ES 15.
Le paragraphe suivant s'applique en plus de l'ISO 17420-2:—, Article 4:
4.3 APR filtrants pour évacuation
Les APR filtrants peuvent également être classés pour une ou plusieurs applications particulières,
comme indiqué dans le Tableau 2.
Tableau 2 — Applications particulières des APR filtrants
Application particulière Classes
a
ES MN t (Évacuation en exploitation minière souterraine)
a
Évacuation ES FF t (Évacuation de lieux d'incendie)
b a
ES XX t (Filtration générale pour les évacuations)
a
Durée de fonctionnement nominale en «t» minutes, par exemple ES 10.
b
Type de gaz.
Exemple pour une application particulière d'évacuation générale avec classe de Protection (PC3), classe
d'IR (bT) et application particulière d'évacuation (ES), classe de performance de filtre à particules (F3)
classe de filtre anti-gaz (AC) et classe t (10).
EXEMPLE PC3 bT ES F3 AC10.
Les APR filtrants multi-fonctionnels ont une classification distincte pour chaque fonction, à savoir une
classification pour le mode sans assistance et une classification pour le mode assisté.
5 Exigences générales applicables aux APR
L'ISO 17420-1:—, Article 5 et l'ISO 17420-2:—, Article 5 ou l'ISO 17420-4:—, Article 5 s'appliquent.
6 Exigences de base pour APR alimentés en gaz respirable et APR filtrants
Toutes les exigences de l'ISO 17420-2:—, Article 6 ou de l'ISO 17420-4:—, Article 6 s'appliquent à moins
d'être remplacées par le présent document et indiquées dans les articles pertinents.
NOTE 1 Des fonctionnalités optionnelles sont également indiquées dans l'ISO 17420-2 ou l'ISO 17420-4.
NOTE 2 Lorsque des exigences sont remplacées par celles de l'Article 7 du présent document, les programmes
d'essais donnés dans l'ISO 17420-2:—, Annexe C ou l'ISO 17420-4:—, Annexe C peuvent être utilisés comme lignes
directrices.
4 © ISO 2020 – Tous droits réservés

---------------------- Page: 9 ----------------------
ISO/FDIS 17420-6:2020(F)

7 Application particulière pour APR d'évacuation alimentés en gaz respirable
et APR d'évacuation filtrants
7.1 APR pour application particulière d'évacuation — Matrices d'exigences
7.1.1 Généralités
Les APR d'évacuation alimentés en gaz respirable doivent satisfaire aux exigences spécifiées dans le
Tableau 3.
Les APR d'évacuation filtrants doivent satisfaire aux exigences données dans le Tableau 4.
7.1.2 APR alimentés en gaz respirable — Évacuation
Le Tableau 3 donne une vue d'ensemble des exigences et du préconditionnement des APR alimentés en
gaz respirable pour application particulière — Évacuation.
Pour chaque ligne du tableau, au moins un APR doit être soumis à essai après le préconditionnement ou
l'ensemble de préconditionnements requis en cas d'association par le signe «&». Les préconditionnements
combinés doivent être réalisés dans l'ordre spécifié.
Le Tableau 3 doit être interprété de la manière suivante:
Les exigences sont données dans la première colonne. Le préconditionnement requis pour différentes
classes d'évacuation est spécifié dans la troisième à la sixième colonne.
Différents échantillons doivent être utilisés pour chaque préconditionnement dans une rangée de la
cellule.
Pour l'exigence 7.2.10.1.1 et la classe d'évacuation en environnements maritimes, les exigences suivantes
s'appliquent:
Au moins un échantillon doit être préconditionné TH&VSS&IE (Exposition à la température et
à l'humidité, exposition aux vibrations et aux chocs — environnements marins et exposition
intermittente).
Au moins un échantillon supplémentaire doit être préconditionné DR (Exposition aux chocs dus aux
chutes).
Pour le nombre total d'échantillon, voir l'ISO 17420-1:—, 5.1.
© ISO 2020 – Tous droits réservés 5

---------------------- Page: 10 ----------------------
ISO/FDIS 17420-6:2020(F)

Tableau 3 — Vue d'ensemble des exigences d'applications particulières — APR alimentés en gaz
respirable — Évacuation
APR alimen-
tés en gaz Évacuation en
Évacuation Évacuation en
respirable exploitation
de lieux environnements
pour éva- minière souter-
d'incendie maritimes
cuation raine
générale
Exigence Titre
a a a a
ES t ES FF t ES MA t ES MN t
Classe de Classe de Classe de protec- Classe de protec-
protection protection tion tion
≥ PC3 ≥ PC3 ≥ PC3 ≥ PC3
Préconditionnement
Exposition à la pous-
b b b b
7.2.1 X X X X
sière
Contact avec les
surfaces chaudes et
c
7.2.2.1 froides — APR d'éva- TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
cuation alimentés en
gaz respirable
Absence d'étincelles par
7.2.3 AR/NP AR/NP AR/NP AR/NP
frottement
Essai dynamique à six
d
7.2.4.1 — AR AR AR
brûleurs
d d
Sécurité intrinsèque – — —
d
7.2.6.2 AR/NP —
Lutte contre les feux
d d d
Sécurité intrinsèque – — — —
7.2.6.3 AR/NP
Exploitation minière
d d
Sécurité intrinsèque – — —
7.2.6.4 AR/NP —
Environnements marins
d
Propriétés antista- —
7.2.7.1 AR/NP AR/NP AR/NP
tiques - Généralités
d d d
Propriétés antistatiques — — —
7.2.7.2 AR/NP
- Lutte contre les feux
d d d
Propriétés antistatiques — — —
7.2.7.3 AR/NP
- Exploitation minière
a
  Durée de fonctionnement nominale en «t» min, voir également 7.2.9.1.
b
  X signifie que l'exposition à la poussière doit être traitée via l'AMDEC (voir 7.2.1).
c
  Sera déterminée durant la validation du programme de performance de l'APR d'évacuation spécifié au
paragraphe 7.2.10.
d
  — signifie qu'un essai n'est pas nécessaire pour cette combinaison d'exigence et de classe d'application particulière.
AR tel que reçu.
AR/NP tel que reçu ou à l'état non préconditionné.
TH&VS&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et aux chocs
(ISO 17420-4:—, 6.11.1.1.3) et exposition intermittente (7.3.3).
TH&VSF&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et aux chocs-
lutte contre les feux (ISO 17420-5:201x, 7.2.2) et exposition intermittente (7.3.3).
TH&VSS&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et aux chocs-
environnements marins (7.3.5) et exposition intermittente (7.3.3).
TH&VSM&PR&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et
aux chocs-exploitation minière (7.3.6), résistance aux changements de pression atmosphérique (7.3.2) et exposition
intermittente (7.3.3).
DR Exposition aux chocs dus aux chutes (7.3.1).
6 © ISO 2020 – Tous droits réservés

---------------------- Page: 11 ----------------------
ISO/FDIS 17420-6:2020(F)

Tableau 3 (suite)
d
Propriétés antista- —
7.2.7.4 tiques – Flexibles AR/NP AR/NP AR/NP
d'APR exposés
Irritation oculaire
7.2.8 AR/NP AR/NP AR/NP AR/NP
(externe)
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Détermination de la
7.2.9.2
durée de fonction-
DR DR DR DR
TH&VS&IE TH&VSF&IE TH&VSS&IE TH&VSM&PR&IE
Validation des exi-
7.2.10.1.1
gences de performance
DR DR DR DR
7.2.10.4 Mise en place et retrait AR/NP AR/NP AR/NP AR/NP
a
  Durée de fonctionnement nominale en «t» min, voir également 7.2.9.1.
b
  X signifie que l'exposition à la poussière doit être traitée via l'AMDEC (voir 7.2.1).
c
  Sera déterminée durant la validation du programme de performance de l'APR d'évacuation spécifié au
paragraphe 7.2.10.
d
  — signifie qu'un essai n'est pas nécessaire pour cette combinaison d'exigence et de classe d'application particulière.
AR tel que reçu.
AR/NP tel que reçu ou à l'état non préconditionné.
TH&VS&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et aux chocs
(ISO 17420-4:—, 6.11.1.1.3) et exposition intermittente (7.3.3).
TH&VSF&IE Exposition à la température et à l'humidité (ISO 17420-4:—, 6.11.1.1.2), exposition aux vibrations et aux chocs-
lutte contre les feux (ISO 17420-5:201x, 7.2.2) et exposition intermittente (7.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.