Paints and varnishes — Determination of solar reflectance

This document specifies a method to determine the solar reflectance of coating systems using a spectrophotometer with a wide spectral range (300 nm to 2 500 nm) and global solar radiation. This document is applicable to coating systems.

Peintures et vernis — Détermination du facteur de réflexion solaire

Le présent document spécifie une méthode permettant de déterminer le facteur de réflexion (réflectance) solaire de systèmes de peinture à l'aide d'un spectrophotomètre à large plage spectrale (300 nm à 2 500 nm) et le rayonnement solaire global. Le présent document s'applique à tous les systèmes de peinture.

General Information

Status
Published
Publication Date
18-Jul-2019
Current Stage
6060 - International Standard published
Start Date
18-Jul-2019
Due Date
30-Oct-2020
Completion Date
19-Jul-2019
Ref Project

Buy Standard

Standard
ISO 22969:2019 - Paints and varnishes -- Determination of solar reflectance
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 22969:2019 - Peintures et vernis -- Détermination du facteur de réflexion solaire
French language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22969
First edition
2019-07
Paints and varnishes — Determination
of solar reflectance
Peintures et vernis — Détermination de réflexion solaire
Reference number
ISO 22969:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 22969:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22969:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
4.1 Spectrophotometer . 2
5 Procedure. 2
5.1 Spectral reflectance of test specimen . 2
5.2 Reference global solar radiation . 2
5.3 Determination of solar reflectance . 3
6 Test report . 3
Annex A (informative) The reference global radiation table . 4
Annex B (informative) Example of a determination method of solar reflectance.8
Bibliography .14
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 22969:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 22969:2019(E)

Introduction
The solar reflectance property of a coating system is determined by the absorbed solar energy
(especially heat) of a building or an object.
This property can be expressed by a numerical value determined by calculation, thanks to which the
impact of solar energy (especially heat) on the environment can be easily understood.
Reduction of greenhouse gases and carbon dioxide (CO ) is achieved by reflecting the solar energy back
2
into the atmosphere, which, reduces global warming. The effect of energy saving by coating system can
be determined using solar reflectance.
© ISO 2019 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 22969:2019(E)
Paints and varnishes — Determination of solar reflectance
1 Scope
This document specifies a method to determine the solar reflectance of coating systems using a
spectrophotometer with a wide spectral range (300 nm to 2 500 nm) and global solar radiation.
This document is applicable to coating systems.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning
and testing
ISO 4618, Paints and varnishes — Terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4618 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1
global solar radiation
total of the direct solar radiation incident on a horizontal surface plus all sky and horizontal ground
reflected radiation within the 2π steradian field of view of the surface
−2
Note 1 to entry: It is expressed in watts per square metre (W·m ).
3.2
radiant flux
radiant power
power emitted, transmitted or received in the form of radiation
Note 1 to entry: It is expressed in watts (W).
[SOURCE: IEC 60050-845:1987, 845-01-24]
3.3
reflectance
ρ
ratio of the reflected radiant or luminous flux to the incident flux in the given spectral composition,
polarization and geometrical distribution
[SOURCE: IEC 60050-845:1987, 845-04-58]
© ISO 2019 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 22969:2019(E)

3.4
solar reflectance
SR
total solar reflectance
TSR
solar reflectance index
SRI
ratio of reflected radiant flux to global solar radiation (3.1) on coating system
3.5
integrating sphere
hollow sphere whose internal surface is a diffuse reflector, as non-selective as possible
Note 1 to entry: An integrating sphere is frequently used with a radiometer or photometer.
[SOURCE: IEC 60050-845:1987, 845-05-24]
3.6
spectrophotometer
instrument for measuring the ratio of two values of a radiometric quantity at the same wavelength
[SOURCE: IEC 60050-845:1987, 845-05-08]
4 Apparatus
4.1 Spectrophotometer
Spectrophotometer with a spectrometer capable of collecting radiations from 300 nm to 2 500 nm
utilizing an integrating sphere with either 8°:di or di:8° geometry so that the regular or specular
reflection may be included. See CIE 15 for details.
5 Procedure
5.1 Spectral reflectance of test specimen
Measurement of spectral reflectance of test specimens shall use the apparatus described in Clause 4
and the scale used for reflectometers shall be traceable to national metrology institutions. Unless
otherwise specified, spectral reflectance is measured from 300 nm to 2 500 nm and sampling interval
is 5 nm.
The test specimens shall be measured at the standard conditions, a temperature of (23 ± 2) °C and a
relative humidity of (50 ± 5) %, as specified in ISO 3270. If the alternative conditions are used, it shall
be stated in the test report.
5.2 Reference global solar radiation
Reference global solar radiation as defined by the SMARTS 2.9.5 model shall be used. The parameters
of reference global solar radiation are: at sea level for air mass, 1,0; aerosol optical depth, 0,10; water
vapor, 1,42 atm-cm; ozone, 0,340 atm-cm. The reference global solar radiation from 300 nm to 2 500 nm
for 5 nm interval is described in Annex A. If the parameter to calculate reference global solar radiation
is different, it shall be reported.
NOTE SMARTS 2.9.5 is a free software. It can be downloaded from the following website: https: //www .nrel
.gov/grid/solar -resource/smarts .html
2 © ISO 2019 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 22969:2019(E)

5.3 Determination of solar reflectance
Solar reflectance is determined by the spectral reflectance of test specimen and the reference global
solar radiation using Formula (1):
λ
2
∫ Edλρ⋅ λλ
() ()
λ
1
ρ = (1)
S
λ
2
∫ Edλλ
()
λ
1
where
ρ is the solar reflectance;
s
−2 −1
E(λ) is the reference global solar radiation (W∙m ∙nm );
ρ(λ) is the spectral reflectance of specimen;
λ is the range of wavelength from λ to λ .
1 2
NOTE In case of the wavelength interval is 1 nm instead of 5 nm, the formula becomes as follows:
λ λ
2 2
ρλ= EE()⋅ρλ()/ ()λ
s
∑∑
λ λ
1 1
Example of a determination of solar reflectance is shown in Annex B.
6 Test report
Test report shall include the followings.
a) a reference to this document, i.e. ISO 22969:2019;
b) a description of test specimen;
c) the type of spectrophotometer;
d) the reflection measurement geometry;
e) the spectral wavelength range and measuring wavelength increments band width and nm-steps
used to scan;
f) the spectral reflectance of test specimen;
g) the solar reflectance;
h) any deviation from the test procedure specified;
i) any unusual features observed;
j) the date of the test.
© ISO 2019 – All rights reserved 3

---------------------- Page: 8 ----------------------
ISO 22969:2019(E)

Annex A
(informative)

The reference global radiation table
Reference global solar radiation at sea level for air mass 1,0; aerosol optical depth 0,10; water vapor
1,42 atm-cm; ozone 0,340 atm-cm is described in Table A.1.
Table A.1 — The table of reference global radiation
Wave- Wave- Wave-
Irradiance Irradiance Irradiance Wavelength Irradiance
length length length
−2 −1 −2 −1 −2 −1 −2 −1
nm W·m ·nm nm W·m ·nm nm W·m ·nm nm W·m ·nm
300 1,48E-02 440 1,72E+00 580 1,66E+00 720 1,14E+00
305 7,65E-02 445 1,83E+00 585 1,66E+00 725 1,15E+00
310 1,89E-01 450 1,93E+00 590 1,57E+00 730 1,16E+00
315 3,11E-01 455 1,94E+00 595 1,59E+00 735 1,24E+00
320 4,24E-01 460 1,96E+00 600 1,59E+00 740 1,24E+00
325 5,70E-01 465 1,94E+00 605 1,60E+00 745 1,26E+00
330 7,22E-01 470 1,91E+00 610 1,59E+00 750 1,25E+00
335 7,10E-01 475 1,93E+00 615 1,55E+00 755 1,23E+00
340 7,56E-01 480 1,95E+00 620 1,55E+00 760 8,01E-01
345 7,48E-01 485 1,82E+00 625 1,51E+00 765 8,25E-01
350 7,93E-01 490 1,84E+00 630 1,50E+00 770 1,14E+00
355 8,21E-01 495 1,87E+00 635 1,52E+00 775 1,17E+00
360 7,79E-01 500 1,82E+00 640 1,51E+00 780 1,16E+00
365 9,43E-01 505 1,82E+00 645 1,49E+00 785 1,14E+00
370 9,90E-01 510 1,80E+00 650 1,47E+00 790 1,11E+00
375 9,24E-01 515 1,71E+00 655 1,40E+00 795 1,10E+00
380 9,70E-01 520 1,71E+00 660 1,42E+00 800 1,09E+00
385 8,45E-01 525 1,75E+00 665 1,43E+00 805 1,08E+00
390 9,89E-01 530 1,78E+00 670 1,45E+00 810 1,06E+00
395 9,29E-01 535 1,77E+00 675 1,45E+00 815 9,46E-01
400 1,40E+00 540 1,74E+00 680 1,42E+00 820 9,21E-01
405 1,53E+00 545 1,75E+00 685 1,35E+00 825 9,43E-01
410 1,56E+00 550 1,75E+00 690 1,26E+00 830 9,48E-01
415 1,63E+00 555 1,74E+00 695 1,32E+00 835 9,80E-01
420 1,62E+00 560 1,69E+00 700 1,33E+00 840 1,00E+00
425 1,59E+00 565 1,68E+00 705 1,34E+00 845 9,98E-01
430 1,44E+00 570 1,65E+00 710 1,35E+00 850 9,55E-01
435 1,61E+00 575 1,66E+00 715 1,28E+00 855 9,21E-01
4 © ISO 2019 – All rights reserved

---------------------- Page: 9 ----------------------
ISO 22969:2019(E)

Table A.1 (continued)
Wave- Wave- Wave-
Irradiance Irradiance Irradiance Wavelength Irradiance
length length length
−2 −1 −2 −1 −2 −1 −2 −1
nm W·m ·nm nm W·m ·nm nm W·m ·nm nm W·m ·nm
860 9,77E-01 1 035 6,67E-01 1 210 4,31E-01 1 385 4,11E-04
865 9,42E-01 1 040 6,62E-01 1 215 4,43E-01 1 390 1,88E-03
870 9,56E-01 1 045 6,53E-01 1 220 4,48E-01 1 395 1,06E-03
875 9,46E-01 1 050 6,48E-01 1 225 4,46E-01 1 400 3,26E-03
880 9,33E-01 1 055 6,40E-01 1 230 4,50E-01 1 405 4,44E-03
885 9,21E-01 1 060 6,26E-01 1 235 4,51E-01 1 410 8,15E-03
890 9,09E-01 1 065 6,20E-01 1 240 4,48E-01 1 415 2,29E-02
895 8,09E-01 1 070 6,07E-01 1 245 4,44E-01 1 420 2,69E-02
900 6,97E-01 1 075 6,05E-01 1 250 4,40E-01 1 425 4,24E-02
905 7,57E-01 1 080 5,94E-01 1 255 4,32E-01 1 430 5,51E-02
910 6,93E-01 1 085 5,80E-01 1 260 4,17E-01 1 435 4,78E-02
915 6,83E-01 1 090 5,71E-01 1 265 3,91E-01 1 440 5,99E-02
920 7,29E-01 1 095 5,37E-01 1 270 3,80E-01 1 445 7,21E-02
925 7,20E-01 1 100 5,11E-01 1 275 4,07E-01 1 450 8,59E-02
930 5,10E-01 1 105 4,83E-01 1 280 4,00E-01 1 455 1,27E-01
935 2,82E-01 1 110 4,29E-01 1 285 4,05E-01 1 460 1,43E-01
940 4,05E-01 1 115 2,80E-01 1 290 4,06E-01 1 465 1,14E-01
945 3,73E-01 1 120 1,88E-01 1 295 3,97E-01 1 470 8,45E-02
950 3,98E-01 1 125 1,58E-01 1 300 3,79E-01 1 475 1,19E-01
955 4,08E-01 1 130 1,94E-01 1 305 3,61E-01 1 480 1,17E-01
960 4,67E-01 1 135 1,77E-01 1 310 3,44E-01 1 485 1,43E-01
965 5,44E-01 1 140 2,78E-01 1 315 3,22E-01 1 490 1,84E-01
970 6,63E-01 1 145 2,16E-01 1 320 3,06E-01 1 495 2,10E-01
975 6,30E-01 1 150 2,35E-01 1 325 2,94E-01 1 500 2,37E-01
980 6,62E-01 1 155 2,94E-01 1 330 2,29E-01 1 505 2,26E-01
985 7,09E-01 1 160 3,59E-01 1 335 2,18E-01 1 510 2,53E-01
990 7,26E-01 1 165 4,14E-01 1 340 1,97E-01 1 515 2,58E-01
995 7,29E-01 1 170 4,42E-01 1 345 1,15E-01 1 520 2,66E-01
1 000 7,21E-01 1 175 4,38E-01 1 350 2,80E-02 1 525 2,71E-01
1 005 7,00E-01 1 180 4,32E-01 1 355 1,90E-03 1 530 2,70E-01
1 010 7,06E-01 1 185 4,29E-01 1 360 9,10E-05 1 535 2,71E-01
1 015 6,98E-01 1 190 4,39E-01 1 365 7,79E-05 1 540 2,68E-01
1 020 6,88E-01 1 195 4,47E-01 1 370 1,47E-04 1 545 2,70E-01
1 025 6,87E-01 1 200 4,26E-01 1 375 1,59E-03 1 550 2,67E-01
1 030 6,78E-01 1 205 4,26E-01 1 380 1,12E-03 1 555 2,64E-01
© ISO 2019 – All rights reserved 5

---------------------- Page: 10 ----------------------
ISO 22969:2019(E)

Table A.1 (continued)
Wave- Wave- Wave-
Irradiance Irradiance Irradiance Wavelength Irradiance
length length length
−2 −1 −2 −1 −2 −1 −2 −1
nm W·m ·nm nm W·m ·nm nm W·m ·nm nm W·m ·nm
1 560 2,64E-01 1 735 1,65E-01 1 910 2,39E-04 2 085 9,04E-02
1 565 2,61E-01 1 740 1,66E-01 1 915 2,53E-04 2 090 9,25E-02
1 570 2,48E-01 1 745 1,60E-01 1 920 1,82E-03 2 095 9,25E-02
1 575 2,38E-01 1 750 1,67E-01 1 925 3,11E-03 2 100 9,02E-02
1 580 2,41E-01 1 755 1,58E-01 1 930 2,35E-03 2 105 9,44E-02
1 585 2,46E-01 1 760 1,61E-01 1 935 7,91E-03 2 110 9,22E-02
1 590 2,41E-01 1 765 1,41E-01 1 940 7,87E-03 2 115 9,29E-02
1 595 2,48E-01 1 770 1,47E-01 1 945 1,83E-02 2 120 8,97E-02
1 600 2,37E-01 1 775 1,27E-01 1 950 2,49E-02 2 125 9,01E-02
1 605 2,32E-01 1 780 1,12E-01 1 955 1,91E-02 2 130 9,05E-02
1 610 2,28E-01 1 785 9,29E-02 1 960 3,21E-02 2 135 9,07E-02
1 615 2,32E-01 1 790 1,00E-01 1 965 4,28E-02 2 140 9,09E-02
1 620 2,34E-01 1 795 6,12E-02 1 970 6,17E-02 2 145 8,99E-02
1 625 2,37E-01 1 800 4,09E-02 1 975 7,76E-02 2 150 8,65E-02
1 630 2,34E-01 1 805 2,24E-02 1 980 8,30E-02 2 155 8,61E-02
1 635 2,27E-01 1 810 1,74E-02 1 985 8,86E
...

NORME ISO
INTERNATIONALE 22969
Première édition
2019-07
Peintures et vernis — Détermination
du facteur de réflexion solaire
Paints and varnishes — Determination of solar reflectance
Numéro de référence
ISO 22969:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 22969:2019(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 22969:2019(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Appareillage . 2
4.1 Spectrophotomètre . 2
5 Mode opératoire. 2
5.1 Facteur de réflexion spectral d’une éprouvette . 2
5.2 Rayonnement solaire global de référence . 3
5.3 Détermination du facteur de réflexion solaire . 3
6 Rapport d’essai . 3
Annexe A (informative) Tableau donnant le rayonnement global de référence .5
Annexe B (informative) Exemple de méthode de détermination du facteur de réflexion solaire .8
Bibliographie .15
© ISO 2019 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 22969:2019(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 35, Peintures et vernis, sous-comité
SC 9, Méthodes générales d'essais des peintures et vernis.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/ fr/ members .html.
iv © ISO 2019 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 22969:2019(F)

Introduction
Le facteur de réflexion (réflectance) solaire d’un système de peinture est déterminé d’après l’énergie
solaire absorbée (en particulier la chaleur) par un bâtiment ou un objet.
Cette propriété peut être exprimée sous la forme d’une valeur numérique obtenue par calcul et permet
de comprendre facilement l’impact de l’énergie solaire (en particulier la chaleur) sur l’environnement.
La réduction des gaz à effet de serre et du monoxyde de carbone (CO ) est assurée par la réflexion de
2
l’énergie solaire vers l’atmosphère qui réduit le réchauffement global. L’effet d’économie d’énergie dû à
un système de peinture peut être déterminé à l’aide du facteur de réflexion solaire.
© ISO 2019 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 22969:2019(F)
Peintures et vernis — Détermination du facteur de
réflexion solaire
1 Domaine d’application
Le présent document spécifie une méthode permettant de déterminer le facteur de réflexion
(réflectance) solaire de systèmes de peinture à l’aide d’un spectrophotomètre à large plage spectrale
(300 nm à 2 500 nm) et le rayonnement solaire global.
Le présent document s’applique à tous les systèmes de peinture.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique.
Pour les références non datées, la dernière édition du document de référence s’applique (y compris les
éventuels amendements).
ISO 3270, Peintures et vernis et leurs matières premières — Températures et humidités pour le
conditionnement et l'essai
ISO 4618, Peintures et vernis — Termes et définitions
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions de l’ISO 4618 ainsi que les suivants
s’appliquent.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l’adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l’adresse http:// www .electropedia .org/
3.1
rayonnement solaire global
total du rayonnement solaire direct incident sur une surface horizontale plus tout le rayonnement
réfléchi par le ciel et le sol horizontal dans le champ de vision selon un angle de 2π stéradian par rapport
à la surface
−2
Note 1 à l'article: Il est exprimé en watts par mètre carré (W·m ).
3.2
flux énergétique
puissance rayonnante
puissance émise, transmise ou reçue sous forme de rayonnement
Note 1 à l'article: Il est exprimé en watts (W).
[SOURCE: IEC 60050-845:1987, 845-01-24]
© ISO 2019 – Tous droits réservés 1

---------------------- Page: 6 ----------------------
ISO 22969:2019(F)

3.3
facteur de réflexion
ρ
rapport du flux énergétique ou lumineux réfléchi au flux incident dans la composition spectrale, la
polarisation et la distribution géométrique données
[SOURCE: IEC 60050-845:1987, 845-04-58]
3.4
facteur de réflexion solaire
SR
facteur de réflexion solaire total
TSR
indice de réflectance solaire
SRI
rapport entre le flux énergétique réfléchi et le rayonnement solaire global (3.1) sur le système de
peinture
3.5
sphère intégrante
sphère creuse dont la surface interne est réfléchissante par diffusion, d’une façon aussi peu sélective
que possible
Note 1 à l'article: La sphère intégrante est souvent utilisée avec un radiomètre ou un photomètre.
[SOURCE: IEC 60050-845:1987, 845-05-24]
3.6
spectrophotomètre
appareil destiné à la mesure du rapport de deux valeurs d’une grandeur radiométrique à la même
longueur d’onde
[SOURCE: IEC 60050-845:1987, 845-05-08]
4 Appareillage
4.1 Spectrophotomètre
Spectrophotomètre équipé d’un spectromètre pouvant recueillir les rayonnements de 300 nm à
2 500 nm, utilisant une sphère intégrante avec une géométrie 8°:di ou di:8° pour pouvoir inclure la
réflexion régulière ou spéculaire. Pour les détails, voir la CIE 15.
5 Mode opératoire
5.1 Facteur de réflexion spectral d’une éprouvette
Le mesurage du facteur de réflexion spectral d’éprouvettes doit se faire au moyen de l’appareillage
décrit à l’Article 4 et la traçabilité de la balance utilisée pour les réflectomètres doit pouvoir remonter
jusqu’à des institutions de métrologie nationales. Sauf indication contraire, le facteur de réflexion
spectral est mesuré de 300 nm à 2 500 nm et l’intervalle d’échantillonnage est de 5 nm.
Les éprouvettes doivent être mesurées dans les conditions normalisées, à une température de (23 ± 2) °C
et une humidité relative de (50 ± 5) %, comme spécifiées dans l’ISO 3270. Si les autres conditions sont
utilisées, l’indiquer dans le rapport d’essai.
2 © ISO 2019 – Tous droits réservés

---------------------- Page: 7 ----------------------
ISO 22969:2019(F)

5.2 Rayonnement solaire global de référence
Il faut utiliser la définition du rayonnement solaire global de référence indiquée par le modèle
SMARTS 2.9.5. Les paramètres du rayonnement solaire global de référence sont les suivants: au niveau
de la mer pour 1,0 de masse d’air; 0,10 de profondeur optique des aérosols; 1,42 atm-cm pour la vapeur
d’eau; 0,340 atm-cm pour l’ozone. Le rayonnement solaire global de référence de 300 nm à 2 500 nm
pour un intervalle de 5 nm est décrit à l’Annexe A. Si le paramètre utilisé pour calculer le rayonnement
solaire global de référence est différent, il faut l’indiquer.
NOTE SMARTS 2.9.5 est un logiciel libre. Il peut être téléchargé depuis le site internet suivant: https:// www
.nrel .gov/ grid/ solar -resource/ smarts .html
5.3 Détermination du facteur de réflexion solaire
Le facteur de réflexion solaire est déterminé par le facteur de réflexion spectral de l’éprouvette et le
rayonnement solaire global de référence en utilisant la Formule (1):
λ
2
∫ Edλρ⋅ λλ
() ()
λ
1
ρ = (1)
S
λ
2
∫ Edλλ
()
λ
1

ρ est le facteur de réflexion solaire;
s
−2 −1
E(λ) est le rayonnement solaire global de référence (W∙m ∙nm );
ρ(λ) est le facteur de réflexion spectral de l’éprouvette;
λ est la plage de longueurs d’onde allant de λ à λ .
1 2
NOTE Pour un intervalle de longueur d’onde de 1 nm au lieu de 5 nm, la formule devient:
λ λ
2 2
ρλ= EE⋅ρλ / λ
() () ()
s
∑∑
λ λ
1 1
L’Annexe B présente un exemple de détermination du facteur de réflexion solaire.
6 Rapport d’essai
Le rapport d’essai doit comprendre les éléments suivants:
a) une référence au présent document, à savoir ISO 22969:2019;
b) une description de l’éprouvette;
c) le type du spectrophotomètre;
d) la géométrie utilisée pour mesurer la réflexion;
e) la plage de longueurs d’onde, la largeur de bande des incréments de longueur d’onde utilisée pour
les mesurages et les paliers de nm utilisés pour le balayage;
f) le facteur de réflexion spectral de l’éprouvette;
g) le facteur de réflexion solaire;
h) tout écart par rapport au mode opératoire d’essai spécifié;
© ISO 2019 – Tous droits réservés 3

---------------------- Page: 8 ----------------------
ISO 22969:2019(F)

i) tout phénomène inhabituel observé;
j) la date de l’essai.
4 © ISO 2019 – Tous droits réservés

---------------------- Page: 9 ----------------------
ISO 22969:2019(F)

Annexe A
(informative)

Tableau donnant le rayonnement global de référence
Le Tableau A.1 décrit le rayonnement solaire global de référence dans les conditions suivantes: au
niveau de la mer pour 1,0 de masse d’air; 0,10 de profondeur optique des aérosols; 1,42 atm-cm pour la
vapeur d’eau; 0,340 atm-cm pour l’ozone.
Tableau A.1 — Tableau du rayonnement solaire global de référence
Longueur Éclairement Longueur Éclairement Longueur Éclairement Longueur Éclairement
d’onde énergétique d’onde énergétique d’onde énergétique d’onde énergétique
−2 −1 −2 −1 −2 −1 −2 −1
nm W·m ·nm nm W·m ·nm nm W·m ·nm nm W·m ·nm
300 1,48E-02 440 1,72E+00 580 1,66E+00 720 1,14E+00
305 7,65E-02 445 1,83E+00 585 1,66E+00 725 1,15E+00
310 1,89E-01 450 1,93E+00 590 1,57E+00 730 1,16E+00
315 3,11E-01 455 1,94E+00 595 1,59E+00 735 1,24E+00
320 4,24E-01 460 1,96E+00 600 1,59E+00 740 1,24E+00
325 5,70E-01 465 1,94E+00 605 1,60E+00 745 1,26E+00
330 7,22E-01 470 1,91E+00 610 1,59E+00 750 1,25E+00
335 7,10E-01 475 1,93E+00 615 1,55E+00 755 1,23E+00
340 7,56E-01 480 1,95E+00 620 1,55E+00 760 8,01E-01
345 7,48E-01 485 1,82E+00 625 1,51E+00 765 8,25E-01
350 7,93E-01 490 1,84E+00 630 1,50E+00 770 1,14E+00
355 8,21E-01 495 1,87E+00 635 1,52E+00 775 1,17E+00
360 7,79E-01 500 1,82E+00 640 1,51E+00 780 1,16E+00
365 9,43E-01 505 1,82E+00 645 1,49E+00 785 1,14E+00
370 9,90E-01 510 1,80E+00 650 1,47E+00 790 1,11E+00
375 9,24E-01 515 1,71E+00 655 1,40E+00 795 1,10E+00
380 9,70E-01 520 1,71E+00 660 1,42E+00 800 1,09E+00
385 8,45E-01 525 1,75E+00 665 1,43E+00 805 1,08E+00
390 9,89E-01 530 1,78E+00 670 1,45E+00 810 1,06E+00
395 9,29E-01 535 1,77E+00 675 1,45E+00 815 9,46E-01
400 1,40E+00 540 1,74E+00 680 1,42E+00 820 9,21E-01
405 1,53E+00 545 1,75E+00 685 1,35E+00 825 9,43E-01
410 1,56E+00 550 1,75E+00 690 1,26E+00 830 9,48E-01
415 1,63E+00 555 1,74E+00 695 1,32E+00 835 9,80E-01
420 1,62E+00 560 1,69E+00 700 1,33E+00 840 1,00E+00
425 1,59E+00 565 1,68E+00 705 1,34E+00 845 9,98E-01
430 1,44E+00 570 1,65E+00 710 1,35E+00 850 9,55E-01
435 1,61E+00 575 1,66E+00 715 1,28E+00 855 9,21E-01
860 9,77E-01 1 035 6,67E-01 1 210 4,31E-01 1 385 4,11E-04
865 9,42E-01 1 040 6,62E-01 1 215 4,43E-01 1 390 1,88E-03
870 9,56E-01 1 045 6,53E-01 1 220 4,48E-01 1 395 1,06E-03
© ISO 2019 – Tous droits réservés 5

---------------------- Page: 10 ----------------------
ISO 22969:2019(F)

Tableau A.1 (suite)
Longueur Éclairement Longueur Éclairement Longueur Éclairement Longueur Éclairement
d’onde énergétique d’onde énergétique d’onde énergétique d’onde énergétique
−2 −1 −2 −1 −2 −1 −2 −1
nm W·m ·nm nm W·m ·nm nm W·m ·nm nm W·m ·nm
875 9,46E-01 1 050 6,48E-01 1 225 4,46E-01 1 400 3,26E-03
880 9,33E-01 1 055 6,40E-01 1 230 4,50E-01 1 405 4,44E-03
885 9,21E-01 1 060 6,26E-01 1 235 4,51E-01 1 410 8,15E-03
890 9,09E-01 1 065 6,20E-01 1 240 4,48E-01 1 415 2,29E-02
895 8,09E-01 1 070 6,07E-01 1 245 4,44E-01 1 420 2,69E-02
900 6,97E-01 1 075 6,05E-01 1 250 4,40E-01 1 425 4,24E-02
905 7,57E-01 1 080 5,94E-01 1 255 4,32E-01 1 430 5,51E-02
910 6,93E-01 1 085 5,80E-01 1 260 4,17E-01 1 435 4,78E-02
915 6,83E-01 1 090 5,71E-01 1 265 3,91E-01 1 440 5,99E-02
920 7,29E-01 1 095 5,37E-01 1 270 3,80E-01 1 445 7,21E-02
925 7,20E-01 1 100 5,11E-01 1 275 4,07E-01 1 450 8,59E-02
930 5,10E-01 1 105 4,83E-01 1 280 4,00E-01 1 455 1,27E-01
935 2,82E-01 1 110 4,29E-01 1 285 4,05E-01 1 460 1,43E-01
940 4,05E-01 1 115 2,80E-01 1 290 4,06E-01 1 465 1,14E-01
945 3,73E-01 1 120 1,88E-01 1 295 3,97E-01 1 470 8,45E-02
950 3,98E-01 1 125 1,58E-01 1 300 3,79E-01 1 475 1,19E-01
955 4,08E-01 1 130 1,94E-01 1 305 3,61E-01 1 480 1,17E-01
960 4,67E-01 1 135 1,77E-01 1 310 3,44E-01 1 485 1,43E-01
965 5,44E-01 1 140 2,78E-01 1 315 3,22E-01 1 490 1,84E-01
970 6,63E-01 1 145 2,16E-01 1 320 3,06E-01 1 495 2,10E-01
975 6,30E-01 1 150 2,35E-01 1 325 2,94E-01 1 500 2,37E-01
980 6,62E-01 1 155 2,94E-01 1 330 2,29E-01 1 505 2,26E-01
985 7,09E-01 1 160 3,59E-01 1 335 2,18E-01 1 510 2,53E-01
990 7,26E-01 1 165 4,14E-01 1 340 1,97E-01 1 515 2,58E-01
995 7,29E-01 1 170 4,42E-01 1 345 1,15E-01 1 520 2,66E-01
1 000 7,21E-01 1 175 4,38E-01 1 350 2,80E-02 1 525 2,71E-01
1 005 7,00E-01 1 180 4,32E-01 1 355 1,90E-03 1 530 2,70E-01
1 010 7,06E-01 1 185 4,29E-01 1 360 9,10E-05 1 535 2,71E-01
1 015 6,98E-01 1 190 4,39E-01 1 365 7,79E-05 1 540 2,68E-01
1 020 6,88E-01 1 195 4,47E-01 1 370 1,47E-04 1 545 2,70E-01
1 025 6,87E-01 1 200 4,26E-01 1 375 1,59E-03 1 550 2,67E-01
1 030 6,78E-01 1 205 4,26E-01 1 380 1,12E-03 1 555 2,64E-01
1 560 2,64E-01 1 735 1,65E-01 1 910 2,39E-04 2 085 9,04E-02
1 565 2,61E-01 1 740 1,66E-01 1 915 2,53E-04 2 090 9,25E-02
1 570 2,48E-01 1 745 1,60E-01 1 920 1,82E-03 2 095 9,25E-02
1 575 2,38E-01 1 750 1,67E-01 1 925 3,11E-03 2 100 9,02E-02
1 580 2,41E-01 1 755 1,58E-01 1 930 2,35E-03 2 105 9,44E-02
1 585 2,46E-01 1 760 1,61E-01 1 935 7,91E-03 2 110 9,22E-02
1 590 2,41E-01 1 765 1,41E-01 1 940 7,87E-03 2 115 9,29E-02
1 595 2,48E-01 1 770 1,47E-01 1 945 1,83E-02 2 120 8,97E-02
1 600 2,37E-01 1 775 1,27E-01 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.