Health informatics — Personal health device communication — Part 10427: Device specialization — Power status monitor of personal health devices

ISO/IEEE 11073-10427:2018 establishes a normative defi nition of communication between devices containing a power source (agents) and managers (e.g., cell phones, personal computers, personal health appliances, set-top boxes) in a manner that enables plug-and-play interoperability. Using existing terminology, information profi les, applica-tion profi le standards, and transport standards as defi ned in other ISO/IEEE 11073 standards, this standard de-fi nes a common core of communication functionality of personal health devices (PHDs) containing a battery, including: 1) current device power status (e.g., on mains or on battery); 2) power charge status (e.g., percent of full charge); and 3) estimated time remaining (e.g., minutes).

Informatique de santé — Communication entre dispositifs de santé personnels — Partie 10427: Spécialisation des dispositifs — Moniteur de l'état de puissance des dispositifs de santé personnels

La présente norme établit une définition normative de la communication entre dispositifs dotés d'une source d'alimentation (agents) et gestionnaires (par exemple, téléphones cellulaires, ordinateurs personnels, appareils de santé personnels et boîtiers décodeurs) de manière à permettre une interopérabilité du type prêt à l'emploi. À l'aide de la terminologie existante, des profils d'information, des normes de profil d'application et des normes de transport tels que définis dans d'autres normes ISO/IEEE 11073, la présente norme définit un tronc commun de fonctionnalités de communication des dispositifs de santé personnels (PHD) contenant une batterie, dont : 1) l'état de puissance actuel du dispositif (par exemple, sur secteur ou sur batterie) ; 2) l'état de charge de puissance (par exemple, pourcentage ou pleine charge) ; et 3) le temps restant estimé (par exemple, nombre de minutes).

General Information

Status
Published
Publication Date
11-Feb-2018
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2028
Ref Project

Buy Standard

Standard
ISO/IEEE 11073-10427:2018 - Health informatics -- Personal health device communication
English language
72 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEEE 11073-10427:2018 - Informatique de santé -- Communication entre dispositifs de santé personnels
French language
84 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL
ISO/IEEE
STANDARD
11073-1042711073-10427
First edition
2018-01
Health informatics — Personal health
device communication —
Part 10427:
Device specialization — Power status
monitor of personal health devices
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10427: Spécialisation des dispositifs — Moniteur de l’état de
puissance des dispositifs de santé personnels
Reference number
ISO/IEEE 11073-10427:2018(E)
© IEEE 201 7

---------------------- Page: 1 ----------------------
ISO/IEEE 11073-10427:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2017
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or
by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the country of
the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org stds.ipr@ieee.org
www.iso.org www.ieee.org
ii © IEEE 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEEE 11073-10427:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non‐governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness
of any judgments contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject
matter covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying
essential patents or patent claims for which a license may be required, for conducting inquiries into the legal
validity or scope of patents or patent claims or determining whether any licensing terms or conditions
provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing
Declaration Form, if any, or in any licensing agreements are reasonable or non‐discriminatory. Users of this
standard are expressly advised that determination of the validity of any patent rights, and the risk of
infringement of such rights, is entirely their own responsibility. Further information may be obtained from
ISO or the IEEE Standards Association.
ISO/IEEE 11073‐10427 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073‐10427‐2016). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast‐track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO
member bodies.
© IEEE 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 11073-10427™-2016
Health informatics—Personal health device communication
Part 10427: Device specialization—
Power Status Monitor of
Personal Health Devices
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 22 September 2016
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10427:2018(E)
Abstract: Guidelines for establishing criteria for application, performance, interchangeability, tests,
life cycle costs, and safety requirements of traction power rectifi er transformers are established
in this standard. Set forth are the electrical, mechanical and thermal design, manufacturing, and
testing requirements for traction power rectifi er transformers for dc electrifi cation systems. Covered
in this standard are liquid-immersed and dry-type transformers, including those with cast coil and
epoxy resin encapsulated windings.
Keywords: basic lightning impulse insulation, BIL, commutating impedance, design optimization,
electrical requirements, factory tests, ferroresonance, heavy rail, hot spot, IEEE 1653.1™, light rail,
load cycle, overvoltage transient, partial discharge (PD) service conditions, tests, traction power
duty cycle, traction power rectifi er transformers, transit application
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2017 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 3 February 2017. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Offi ce, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
PDF: ISBN 978-1-5044-2268-0 STD21081
Print: ISBN 978-1-5044-2269-7 STDPD21081
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
2
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10427:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notic-
es and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on
request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Asso-
ciation (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus de-
velopment process, approved by the American National Standards Institute (“ANSI”), which brings together
volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are doc-
uments developed through scientific, academic, and industry-based technical working groups. Volunteers in
IEEE working groups are not necessarily members of the Institute and participate without compensation from
IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus develop-
ment process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or
the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards doc-
uments are responsible for determining and complying with all appropriate safety, security, environmental,
health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other document
relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular
purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In
addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards
documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments received
from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or
her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-
ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-
TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH
DAMAGE WAS FORESEEABLE.
3
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10427:2018(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that
an IEEE standard is translated, only the English version published by IEEE should be considered the approved
IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations
Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall
not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or
educational courses, an individual presenting information on IEEE standards shall make it clear that his or her
views should be considered the personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-
ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed
change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus
of concerned interests, it is important that any responses to comments and questions also receive the concur-
rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-
nating Committees are not able to provide an instant response to comments or questions except in those cases
where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation
requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the
relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require-
ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory
requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance
with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and
the promotion of engineering practices and methods. By making these documents available for use and adop-
tion by public authorities and private users, IEEE does not waive any rights in copyright to the documents.
4
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10427:2018(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy
portions of any individual standard for company or organizational internal use or individual, non-commercial
use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser-
vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of
any individual standard for educational classroom use can also be obtained through the Copyright Clearance
Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time by
the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-
genda, or errata. An official IEEE document at any point in time consists of the current edition of the document
together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEE’s standards
development process, visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-
ination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-
sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries
into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions
provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are
reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-
ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further
information may be obtained from the IEEE Standards Association.
5
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10427:2018(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the 11073 Personal
Health Device Working Group had the following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Miriam L. Makhlouf, Vice Chair
Karsten Aalders Santiago Carot-Nemesio Christoph Fischer
Randy W. Carroll Morten Flintrup
Charles R. Abbruscato
Nabil Abujbara Simon Carter Joseph W. Forler
Maher Abuzaid Seungchul Chae Russell Foster
Eric Freudenthal
James Agnew Rahul Chauhan
Haidar Ahmad James Cheng Matthias Frohner
Manfred Aigner Peggy Chien Ken Fuchs
Jorge Alberola David Chiu Jing Gao
Murtaza Ali Chia-Chin Chong Xuemei Gao
Rolf Ambuehl Saeed A. Choudhary Marcus Garbe
David Aparisi Jinhan Chung John Garguilo
Paolo Ariano Malcolm Clarke Rick Geimer
Lawrence Arne John A. Cogan Igor Gejdos
Diego B. Arquillo John T. Collins Ferenc Gerbovics
Cory Condek Nicolae Goga
Serafi n Arroyo
Muhammad Asim Todd H. Cooper Julian Goldman
Merat Bagha David Cornejo Raul Gonzalez Gomez
Chris Gough
Doug Baird Douglas Coup
David Baker Nigel Cox Channa Gowda
Anindya Bakshi Hans Crommenacker Charles M. Gropper
Ananth Tomio Crosley Amit Gupta
  Balasubramanian David Culp Jeff Guttmacher
Sunlee Bang Allen Curtis Rasmus Haahr
M. Jonathan Barkley Ndifor Cyril Fru Christian Habermann
Jesús Daniel Trigo Michael Hagerty
Gilberto Barrón
David Bean Eyal Dassau Jerry Hahn
John Bell David Davenport Robert Hall
Russell Davis Nathaniel Hamming
Rudy Belliardi
Kathryn M. Bennett Sushil K. Deka Rickey L. Hampton
Daniel Bernstein Ciro de la Vega Sten Hanke
Aki Harma
George A. Bertos Pedro de-las-
Chris Biernacki  Heras-Quiros Jordan Hartmann
Ola Björsne Jim DelloStritto Kai Hassing
Thomas Blackadar Matthew d’Entremont Marc Daniel Haunschild
Marc Blanchet Lane Desborough Wolfgang Heck
Thomas Bluethner Kent Dicks Nathaniel Heintzman
Douglas P. Bogia Hyoungho Do Charles Henderson
Xiaolian Duan Jun-Ho Her
Xavier Boniface
Shannon Boucousis Brian Dubreuil Takashi Hibino
Julius Broma Sourav Dutta Timothy L. Hirou
Jakob Ehrensvard Allen Hobbs
Lyle G. Bullock Jr.
Bernard Burg Fredrik Einberg Alex Holland
Chris Burns Michihiro Enokida Arto Holopainen
Kris Holtzclaw
Anthony Butt Javier Escayola Calvo
Jeremy Byford-Rew Mark Estes Robert Hoy
Satya Calloji Leonardo Estevez Frank Hsu
Xiaoying Cao Roger Feeley Anne Huang
Carole C. Carey Hailing Feng Sen-Der Huang
Craig Carlson Bosco T. Fernandes Zhiqiang Huang
6
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10427:2018(E)
Ron Huby Don Ludolph Barry Reinhold
David Hughes Christian Luszick Brian Reinhold
Melvin I. Reynolds
Robert D. Hughes Bob MacWilliams
Jiyoung Huh Srikkanth John G. Rhoads
Hugh Hunter  Madhurbootheswaran Jeffrey S. Robbins
Hitoshi Ikeda Miriam L. Makhlouf Moskowitz Robert
Yutaka Ikeda Romain Marmot Chris Roberts
Philip O. Isaacson Sandra Martinez Timothy Robertson
Atsushi Ito Miguel Martínez David Rosales
  de Espronceda Cámara Bill Saltzstein
Michael Jaffe
Praduman Jain Peter Mayhew Benedikt Salzbrunn
Wei Jin Jim McCain Giovanna Sannino
László Meleg Jose A. Santos-Cadenas
Danny Jochelson
Phaneeth Junga Alexander Mense Stefan Sauermann
Akiyoshi Kabe Jinsei Miyazaki John Sawyer
Guillaume Schatz
Steve Kahle Erik Moll
Tomio Kamioka Darr Moore Alois Schloegl
Kei Kariya Carsten Mueglitz Paul S. Schluter
Andy Kaschl Piotr Murawski Lars Schmitt
Junzo Kashihara Soundharya Mark G. Schnell
Kohichi Kashiwagi  Nagasubramanian Richard A. Schrenker
Ralph Kent Jae-Wook Nah Antonio Scorpiniti
Alex Neefus Kwang Seok Seo
Laurie M. Kermes
Ikuo Keshi Trong-Nghia Riccardo Serafi n
Junhyung Kim  Nguyen-Dobinsky Sid Shaw
Michael E. Nidd Frank Shen
Minho Kim
Min-Joon Kim Tetsu Nishimura Bozhi Shi
Taekon Kim Jim Niswander Min Shih
Mazen Shihabi
Tetsuya Kimura Hiroaki Niwamoto
David Klonoff Thomas Norgall Redmond Shouldice
Alfred Kloos Anand Noubade Sternly K. Simon
Jeongmee Koh Yoshiteru Nozoe Marjorie Skubic
Jean-Marc Koller Abraham Ofek Robert Smith
John Koon Brett Olive Ivan Soh
Patty Krantz Begonya Otal Motoki Sone
Marco Paleari Emily Sopensky
Raymond Krasinski
Alexander Kraus Charles Palmer Rajagopalan Srinivasan
Ramesh Krishna Bud Panjwani Andreas Staubert
Carl Pantiskas Nicholas Steblay
Geoffrey Kruse
Falko Kuester Harry P. Pappas Beth Stephen
Rafael Lajara Hanna Park Lars Steubesand
John (Ivo) Stivoric
Pierre Landau Jong-Tae Park
Jaechul Lee Myungeun Park Raymond A. Strickland
JongMuk Lee Soojun Park Chandrasekaran
Kyong Ho Lee Phillip E. Pash  Subramaniam
Rami Lee TongBi Pei Hermanni Suominen
Sungkee Lee Lucian Pestritu Lee Surprenant
Woojae Lee Soren Petersen Ravi Swami
James Petisce Ray Sweidan
Yonghee Lee
Joe Lenart Peter Piction Jin Tan
Kathryn A. Lesh Michael Pliskin Yi Tang
Jeff Price Haruyuyki Tatsumi
Qiong Li
Ying Li Harald Prinzhorn John W. Thomas
Patrick Lichter Harry Qiu Jonas Tirén
Alexandra Todiruta
Jisoon Lim Arif Rahman
Joon-Ho Lim Tanzilur Rahman Janet Traub
John Lin Steve Ray Gary Tschautscher
Wei-Jung Lo Phillip Raymond Masato Tsuchid
Charles Lowe Tim Reilly Ken Tubman
7
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10427:2018(E)
Yoshihiro Uchida Jerry P. Wang Ariton Xhafa
Akib Uddin Yao Wang Yaxi Yan
Sunil Unadkat Yi Wang Ricky Yang
Fabio Urbani Steve Warren Melanie S. Yeung
Philipp Urbauer Fujio Watanabe Done-Sik Yoo
Laura Vanzago Toru Watsuji Jianchao Zeng
Alpo Värri Mike Weng Jason Zhang
Dalimar Velez Kathleen Wible Zhiqiang Zhang
Rudi Voon Paul Williamson Thomas Zhao
Miha Zoubek
Isobel Walker Jan Wittenber
David Wang Jia-Rong Wu Szymon Zyskoter
Will Wykeham
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Lyle Bullock Werner Hoelzl Bartien Sayogo
Keith Chow Noriyuki Ikeucki Walter Struppler
Jan Wittenber
Malcolm Clarke Atsushi Ito
Sourav Dutta Piotr Karocki Paul Work
Christoph Fischer Erik Moll Oren Yuen
Randall Groves Michael Newman Daidi Zhong
Melvin Reynolds
When the IEEE-SA Standards Board approved this standard on 22 September 2016, it had the following
membership:
Jean-Philippe Faure, Chair
Ted Burse, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Chuck Adams Ronald W. Hotchkiss Mehmet Ulema
Masayuki Ariyoshi Michael Janezic Yingli Wen
Stephen Dukes Joseph L. Koepfi nger* Howard Wolfman
Jianbin Fan Hung Ling Don Wright
J. Travis Griffi th Kevin Lu Yu Yuan
Gary Hoffman Annette D. Reilly Daidi Zhong
Gary Robinson
*Member Emeritus
8
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEEE 11073-10427:2018(E)
Introduction
This introduction is not part of IEEE Std 11073-10427-2016, Health Informatics—Personal health device communica-
tion—Part 10427: Device Specialization—Power Status Monitor of Personal Health Devices.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems.
This document uses the optimized framework created in ISO/IEEE 11073-20601 and describes a specific,
interoperable communication approach for power status monitor of personal health devices (PHDs). These
standards align with and draw on the existing clinically focused standards to provide support for communica-
tion of data from clinical or PHDs.
9
Copyright © 2017 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------
ISO/IEEE 11073-10427:2018(E)
Contents
1. Overview . 12
1.1 Scope . 12
1.2 Purpose . 12
1.3 Context . 12
2. Normative references . 13
3. Definitions, acronyms, and abbreviations . 13
3.1 Definitions . 13
3.2 Acronyms and abbreviations . 14
4. Introduction to ISO/IEEE 11073 personal health devices (PHDs) . 14
4.1 General . 14
4.2 Introduction to IEEE 11073-20601 modeling constructs . 15
4.3 Compliance with other standards . 15
5. Power status monitor concepts and modalities . 16
5.1 General . 16
5.2 Use case . 16
6. Power status monitor domain information model . 16
6.1 Overview . 16
6.2 Class extensions . 16
6.3 Object instance diagram . 17
6.4 Types of configuration . 18
6.5 Profiles. 19
6.6 Medical device system (MDS) object . 19
6.7 Numeric objects . 23
6.8 Real-time sample array objects . 25
6.9 Enumeration objects . 25
6.10 PM-store objects . 28
6.11 Scanner objects . 31
6.12 Class extension objects .
...

NORME
ISO/IEEE
INTERNATIONALE
11073-10427
Première édition
2018-01
Informatique de santé —
Communication entre dispositifs de
santé personnels —
Partie 10427:
Spécialisation des dispositifs —
Moniteur de l'état de puissance des
dispositifs de santé personnels
Health informatics — Personal health device communication —
Part 10427: Device specialization — Power status monitor of
personal health devices
Numéro de référence
ISO/IEEE 11073-10427:2018(F)
©
IEEE 2017

---------------------- Page: 1 ----------------------
ISO/IEEE 11073-10427:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© IEEE 2017
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO ou à l’IEEE à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Case postale 401 • Ch. de Blandonnet 8 3 Park Avenue, New York
CH-1214 Vernier, Genève NY 10016-5997, USA
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org E-mail: stds.ipr@ieee.org
Web: www.iso.org Web: www.ieee.org
Publié en Suisse
© IEEE 2017 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO/IEEE 11073-10427:2018(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les documents normatifs de l'IEEE sont développés au sein des sociétés de l'IEEE et des Comités de
Coordination des Normes du Conseil des normes de l'Association des normes IEEE (IEEE-SA). L'IEEE
développe ses normes par le biais d'un processus de développement de consensus approuvé par l'American
National Standards Institute, qui rassemble des volontaires représentant divers points de vue et divers
intérêts pour parvenir au produit final. Les volontaires ne sont pas nécessairement des membres de l'Institut
et aucune compensation ne leur est attribuée. Bien que l'IEEE administre le processus et établisse des règles
pour favoriser l'équité au cours du processus de développement du consensus, l'IEEE n'évalue pas, ne teste
pas ou ne vérifie pas de manière indépendante l'exactitude des informations ni le bien-fondé de tous les
jugements contenus dans ses normes.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. Du fait de la publication de la présente norme,
aucune position n'est adoptée en ce qui concerne l'existence ou la validité de tout droit de propriété
intellectuelle ou droit analogue en rapport avec celle-ci. Il n'incombe pas à l'ISO/IEEE d'identifier des brevets
essentiels ou des revendications de brevet pour lesquels une licence peut être requise, ni de conduire des
enquêtes en ce qui concerne la validité légale ou la portée des brevets ou des revendications de brevet ou de
déterminer si des termes ou conditions d'attribution de licence fournis en rapport avec la soumission d'une
lettre d'assurance ou d'une déclaration de brevet et du formulaire de déclaration d'attribution de licence,
s'il y en a, ou dans des accords d'attribution de licence quelconques sont raisonnables ou non
discriminatoires. Les utilisateurs de la présente norme sont expressément avisés que la détermination de la
validité de tout droit de brevet et le risque de violation de ces droits leur incombent entièrement. Des
informations supplémentaires peuvent être obtenues auprès de l'ISO ou de l'Association des normes IEEE.
L'ISO/IEEE 11073-10427 a été élaborée par le Comité IEEE 11073 de la Société d'Ingénierie en Médecine et
Biologie de l'IEEE (en tant que norme IEEE 11073-10427-2016). Elle a été adoptée par le comité technique
ISO/TC 215, Informatique de santé, parallèlement à son approbation par les organismes membres de l'ISO
dans le cadre de la « procédure rapide » définie par l'accord de coopération entre les Organisations
Partenaires de Développement de normes que sont l'ISO et l'IEEE. L'IEEE est responsable de la tenue à jour
du présent document, avec la participation et le concours des comités membre de l'ISO.

© IEEE 2017 – Tous droits réservés
iii

---------------------- Page: 3 ----------------------
ISO/IEEE 11073-10427:2018(F)
Informatique de santé — Communication entre dispositifs de santé
personnels
Partie 10427 : Spécialisation des dispositifs —
Moniteur de l'état de puissance des dispositifs de santé
personnels
Commanditaire
Comité IEEE 11073™
de la
Société d'Ingénierie en Médecine et Biologie de l'IEEE
Approuvé le 22 septembre 2016
Conseil des Normes IEEE-SA


© IEEE 2017 – Tous droits réservés
iv

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10427:2018(F)
Résumé : les lignes directrices pour l'établissement des critères d'application, de performance,
d'interchangeabilité, d'essai, de coût global de cycle de vie et des exigences de sécurité des transformateurs-
redresseurs à puissance de traction sont établies dans la présente norme. Les exigences relatives à la
conception électrique, mécanique et thermique, à la fabrication et aux essais des transformateurs-
redresseurs à puissance de traction pour systèmes d'électrification à courant continu y sont énoncées. La
présente norme porte sur les transformateurs de type immergé dans le liquide et de type sec, y compris ceux
qui sont dotés d'une bobine moulée et d'enroulements emboîtés en résine époxyde.
Mots-clés : isolation de base à la tension de choc de foudre, BIL (tension de tenue au choc), impédance de
commutation, optimisation de la conception, exigences électriques, essais en usine, ferrorésonance, rail
lourd, point chaud, IEEE 1653.1™, rail léger, cycle de charge, surtension transitoire, conditions de service en
décharge partielle, essais, cycle de fonctionnement de la puissance de traction, transformateurs-redresseurs
à puissance de traction, application de transit












The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2017 by The Institute of Electrical and Electronics Engineers, Inc.
Droits de reproduction réservés. Publié le 3 février 2017. Imprimé aux États-Unis.
IEEE est une marque de commerce déposée à l'Office des brevets et des marques des États-Unis, détenue par l'Institute of Electrical and Electronics
Engineers, Incorporated.
Toute reproduction, même partielle, de cette publication, sous quelque forme et par quelque procédé que ce soit, y compris par système de
localisation électronique, est interdite sans l'autorisation écrite préalable de l'éditeur.
PDF : ISBN 978-1-5044- STD21081
2268-0
Copie papier : ISBN 978-1-5044- STDPD21081
2269-7
L'IEEE interdit toute discrimination, tout harcèlement et toute intimidation.
Pour plus d'informations, visiter http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html
© IEEE 2017 – Tous droits réservés
v

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10427:2018(F)
Notes importantes et rejets de responsabilité concernant les documents
normatifs de l'IEEE
Les documents de l'IEEE sont mis à disposition afin d'être utilisés sous réserve de notes importantes et de
rejets de responsabilité légale. Ces notes et rejets de responsabilité, ou la référence à cette page, apparaissent
dans toutes les normes et peuvent être trouvés sous le titre « Notes importantes et rejets de responsabilité
concernant les documents normatifs de l'IEEE ». Ils peuvent également être obtenus sur demande auprès de
l'IEEE ou visualisés sur le site : http://standards.ieee.org/IPR/disclaimers.html.
Note et rejet de responsabilité concernant l'utilisation des documents
normatifs de l'IEEE
Les documents normatifs de l'IEEE (normes, pratiques recommandées et guides), à utilisation
expérimentale ou définitive, sont élaborés au sein des sociétés de l'IEEE et des Comités de Coordination des
Normes du Conseil des normes de l'Association des normes IEEE (« IEEE-SA »). L'IEEE (« l'Institut »)
développe ses normes par le biais d'un processus de développement de consensus approuvé par l'American
National Standards Institute (« ANSI »), qui rassemble des volontaires représentant divers points de vue et
divers intérêts pour parvenir au produit final. Les normes IEEE sont des documents élaborés par des
groupes de travail scientifiques, universitaires et techniques du secteur d'activité concerné. Les volontaires
des groupes de travail de l'IEEE ne sont pas nécessairement membres de l'Institut. Ils participent sans
qu'aucune compensation ne leur soit accordée par l'IEEE. Bien que l'IEEE administre le processus et
établisse des règles pour favoriser l'équité au cours du processus de développement de consensus, l'IEEE
n'évalue pas, ne teste pas ou ne vérifie pas de manière indépendante l'exactitude des informations ou la
justesse des appréciations contenues dans ses normes.
Les normes IEEE ne garantissent ou n'assurent pas la sécurité, la sûreté, la santé ou la protection de
l'environnement, ni n'assurent une protection contre toute interférence avec ou provenant d'autres
dispositifs ou réseaux. Il incombe aux personnes appliquant des documents normatifs de l'IEEE et à leurs
utilisateurs de déterminer toutes les pratiques appropriées de protection concernant la sécurité, la sûreté,
l'environnement, la santé et les interférences, et toutes les lois et réglementations applicables, et de s'y
conformer.
L'IEEE ne garantit pas ni ne déclare l'exactitude ou le contenu des documents contenus dans ses normes, et
rejette expressément toute garantie (expresse, implicite et réglementaire) non reprise aux présentes ou
dans tout autre document relatif à la norme, y compris, sans toutefois s'y limiter, les garanties : d'aptitude à
la commercialisation ; d'aptitude à un besoin spécifique ; de non-contrefaçon ; et de qualité, d'exactitude,
d'efficacité, d'état de mise à jour ou d'exhaustivité du document. En outre, l'IEEE décline toute condition
relative aux résultats et à l'absence de défaut de fabrication. Les documents normatifs de l'IEEE sont fournis
« EN L'ÉTAT » et « AVEC TOUS LEURS DÉFAUTS ».
L'utilisation d'une norme IEEE est totalement volontaire. L'existence d'une norme IEEE n'implique pas qu'il
n'y ait pas d'autres manières de produire, de tester, de mesurer, d'acheter, de commercialiser ou de fournir
d'autres biens et services qui se rapportent au domaine d'application de la norme IEEE. En outre, le point de
vue exprimé à l'instant où une norme est approuvée et est émise est soumis aux changements provoqués
par les développements techniques et les commentaires reçus des utilisateurs de la norme.

© IEEE 2017 – Tous droits réservés
vi

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10427:2018(F)
En publiant ses normes et en les rendant disponibles, l'IEEE ne suggère pas ou ne rend pas de services
professionnels ou autres pour une personne ou une entité quelconque. L'IEEE ne s'engage pas non plus à
exécuter des devoirs quelconques à la charge de toute autre personne ou de toute autre entité vis-à-vis d'une
autre personne ou entité. Il est recommandé à toute personne utilisant tout document normatif de l'IEEE de
s'appuyer sur son jugement indépendant pour déterminer l'exercice des précautions raisonnables dans
toutes les circonstances données ou, le cas échéant, de demander conseil à un professionnel compétent afin
de décider de l'adéquation d'une norme IEEE donnée.
EN AUCUN CAS L'IEEE NE SAURAIT ÊTRE TENU POUR RESPONSABLE DE TOUT DOMMAGE DIRECT,
INDIRECT, ACCIDENTEL, SPÉCIAL, EXEMPLAIRE OU CONSÉCUTIF (Y COMPRIS, SANS TOUTEFOIS S'Y
LIMITER, LA FOURNITURE DE BIENS OU SERVICES ÉQUIVALENTS ; LA PERTE D'USAGE, DE DONNÉES OU
DE BÉNÉFICES ; OU L'INTERRUPTION DES ACTIVITÉS) QUELLES QU'EN SOIENT LES CAUSES ET QUEL QUE
SOIT LE TYPE DE RESPONSABILITÉ, CONTRACTUELLE, SANS FAUTE OU FONDÉE SUR UN DÉLIT CIVIL (Y
COMPRIS PAR NÉGLIGENCE OU AUTREMENT) DÉCOULANT DE QUELQUE FAÇON QUE CE SOIT DE LA
PUBLICATION, DE L'UTILISATION DE CELLE-CI OU DU FAIT DE REPOSER SUR UNE NORME QUELLE
QU'ELLE SOIT, MÊME SI LA POSSIBILITÉ DE CE DOMMAGE, ET INDÉPENDAMMENT DU CARACTÈRE
PRÉVISIBLE OU NON DE CE DOMMAGE, A ÉTÉ MENTIONNÉE.
Traductions
Le processus de développement de consensus de l'IEEE implique l'examen de documents en anglais
uniquement. Si une norme IEEE est traduite, il convient que seule la version anglaise publiée par l'IEEE soit
considérée comme la norme IEEE approuvée.
Déclarations officielles
Une déclaration, écrite ou orale, qui n'est pas traitée conformément au manuel des opérations du Conseil
des Normes IEEE-SA ne doit pas être considérée ou déduite comme étant la position officielle de l'IEEE ou
de l'un quelconque de ses comités et ne doit pas être considérée comme une position formelle de l'IEEE ni
servir de base à une telle interprétation. Lors de conférences, de symposiums, de séminaires ou de cours de
formation, une personne présentant des informations sur les normes IEEE doit indiquer clairement qu'il
convient que ses points de vue soient considérés comme les points de vue personnels de cette personne
plutôt que comme la position officielle de l'IEEE.
Commentaires sur les normes
Les commentaires visant à des révisions des documents normatifs de l'IEEE provenant de toute partie
intéressée sont les bienvenus, indépendamment de l'affiliation en tant que membre de l'IEEE. Toutefois,
l'IEEE ne fournit pas d'informations de consultation ou de conseils ayant trait aux documents normatifs de
l'IEEE. Il convient que des suggestions pour des modifications aux documents se présentent sous la forme
d'une modification de texte proposée accompagnée des commentaires d'appui appropriés. Comme les
normes IEEE représentent un consensus des intérêts concernés, il importe que toute réponse à des
commentaires et questions reçoive également l'attention d'intérêts équilibrés. Pour cette raison, l'IEEE et
les membres de ses sociétés et de ses Comités de Coordination des normes ne peuvent pas fournir une
réponse instantanée aux commentaires et questions, excepté dans les cas où la question a précédemment
été abordée. Pour la même raison, l'IEEE ne répond pas aux demandes d'interprétation. Toute personne
désireuse de participer aux révisions d'une norme IEEE est invitée à se joindre au groupe de travail
approprié de l'IEEE.
© IEEE 2017 – Tous droits réservés
vii

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10427:2018(F)
Il convient que les commentaires sur les normes soient envoyés à l'adresse suivante :
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Lois et règlements
Il est recommandé aux utilisateurs des documents normatifs de l'IEEE de consulter toutes les lois et tous les
règlements applicables. La conformité aux dispositions d'un document normatif de l'IEEE, quel qu'il soit,
n'implique pas la conformité à toutes les exigences réglementaires applicables. Il incombe aux personnes ou
organismes mettant en œuvre la norme d'observer les exigences réglementaires applicables ou d'y faire
référence. L'IEEE n'a pas l'intention, du fait de la publication de ses normes, de provoquer des actions qui ne
sont pas conformes aux lois applicables, et ces documents ne peuvent pas être interprétés comme le faisant.
Droits d'auteur
Les projets de normes et les normes approuvées de l'IEEE sont protégés par le droit d'auteur de l'IEEE en
vertu de la législation américaine et internationale sur le droit d'auteur. Ils sont mis à disposition par l'IEEE
et adoptés pour diverses utilisations à la fois publiques et privées. Celles-ci incluent une utilisation, par
référence, dans les lois et réglementations, et une utilisation dans l'autoréglementation, la normalisation et
la promotion de pratiques et de méthodes d'ingénierie. En rendant ce document disponible en vue de son
utilisation et de son adoption par les autorités publiques et les utilisateurs privés, l'IEEE ne renonce à aucun
droit d'auteur sur ce document.
Photocopies
Sous réserve du versement de la redevance appropriée, l'IEEE accordera à un utilisateur une licence limitée
et non exclusive l'autorisant à photocopier des parties d'une norme individuelle, pour l'usage interne d'une
entreprise ou d'un organisme, ou pour une utilisation personnelle non commerciale uniquement. Pour les
dispositions relatives au versement du droit de licence, veuillez contacter le Copyright Clearance Center,
Customer Service, 222 Rosewood Drive, Danvers, MA 01923 États-Unis ; +1 978 750 8400. L'autorisation de
photocopier des parties d'une norme individuelle à des fins éducatives en classe peut également être
obtenue auprès du Copyright Clearance Center.
Mise à jour des documents normatifs de l'IEEE
Il convient que les utilisateurs des documents normatifs de l'IEEE soient informés du fait que ces documents
peuvent être remplacés à tout moment par la publication de nouvelles éditions ou peuvent être amendés de
temps à autre par le biais de l'émission d'amendements, de correctifs ou d'errata. Un document IEEE officiel,
à un instant quelconque, est constitué de l'édition actuelle du document accompagnée de tous les
amendements, correctifs ou errata alors en vigueur.
Chaque norme IEEE est soumise à un examen au moins tous les dix ans. Lorsqu'un document a plus de
dix ans et qu'il n'a pas fait l'objet d'une révision, il est raisonnable de conclure que son contenu, bien qu'il ait
encore une certaine valeur, ne reflète pas totalement l'état actuel de la technique. Les utilisateurs sont invités
à s'assurer qu'ils ont la dernière édition des normes IEEE.
© IEEE 2017 – Tous droits réservés
viii

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10427:2018(F)
Pour déterminer si un document donné est l'édition actuelle et s'il a été amendé par le biais de l'émission
d'amendements, de correctifs ou d'errata, il convient de visiter le site web IEEE Xplore à
l'adresse http://ieeexplore.ieee.org/ ou de contacter l'IEEE à l'adresse citée précédemment. Pour plus
d'informations sur l'IEEE-SA ou sur le processus d'élaboration des normes IEEE, visiter le site web de l'IEEE-
SA à l'adresse http://standards.ieee.org.
Errata
Le cas échéant, les errata de toutes les normes IEEE sont accessibles sur le site web de l'IEEE-SA à l'adresse
suivante : http://standards.ieee.org/findstds/errata/index.html. Les utilisateurs sont encouragés à vérifier
périodiquement cette URL pour rechercher d'éventuels errata.
Brevets
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. Du fait de la publication de la présente norme,
aucune position n'est adoptée par l'IEEE en ce qui concerne l'existence ou la validité de tout droit de
propriété intellectuelle ou droit analogue en rapport avec celle-ci. Si le détenteur d'un brevet ou le
demandeur d'un brevet a déposé une déclaration d'assurance par le biais d'une lettre d'assurance acceptée,
alors la déclaration est incluse sur le site web de l'IEEE-SA à l'adresse
http://standards.ieee.org/about/sasb/patcom/patents.html. Les lettres d'assurance peuvent indiquer si le
Soumissionnaire est disposé ou non à accorder des licences sous droits de brevet sans compensation ou à
un taux raisonnable, à des termes raisonnables qui sont manifestement exempts de toute discrimination
abusive envers les demandeurs désireux d'obtenir de telles licences.
Des revendications de brevet essentiel peuvent exister pour lesquelles une lettre d'assurance n'a pas été
reçue. Il n'incombe pas à l'IEEE d'identifier des revendications de brevet essentiel pour lesquelles une
licence peut être requise, ni de conduire des enquêtes en ce qui concerne la validité légale ou la portée des
revendications de brevet, ou de déterminer si des termes ou conditions d'attribution de licence fournis en
rapport avec la soumission d'une lettre d'assurance, s'il y en a, ou dans des accords d'attribution de licence
quelconques sont raisonnables ou non discriminatoires. Les utilisateurs de la présente norme sont
expressément avisés que la détermination de la validité de tout droit de brevet et le risque de violation de
ces droits leur incombent entièrement. Des informations supplémentaires peuvent être obtenues auprès de
l'Association des normes IEEE.

© IEEE 2017 – Tous droits réservés
ix

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10427:2018(F)
Participants
Au moment de la soumission de la présente norme au Conseil des Normes IEEE-SA pour approbation, le
groupe de travail 11073 relatif aux dispositifs de santé personnels comprenait les membres suivants :
Daidi Zhong, coprésident
Michael J. Kirwan, coprésident
Miriam L. Makhlouf, vice-présidente
Karsten Aalders Randy W. Carroll Joseph W. Forler
Charles R. Abbruscato Simon Carter Russell Foster
Nabil Abujbara Seungchul Chae Eric Freudenthal
Maher Abuzaid Rahul Chauhan Matthias Frohner
James Agnew James Cheng Ken Fuchs
Haidar Ahmad Peggy Chien Jing Gao
Manfred Aigner David Chiu Xuemei Gao
Jorge Alberola Chia-Chin Chong Marcus Garbe
Murtaza Ali Saeed A. Choudhary John Garguilo
Rolf Ambuehl Jinhan Chung Rick Geimer
David Aparisi Malcolm Clarke Igor Gejdos
Paolo Ariano John A. Cogan Ferenc Gerbovics
Lawrence Arne John T. Collins Nicolae Goga
Diego B. Arquillo Cory Condek Julian Goldman
Serafin Arroyo Todd H. Cooper Raul Gonzalez Gomez
Muhammad Asim David Cornejo Chris Gough
Merat Bagha Douglas Coup Channa Gowda
Doug Baird Nigel Cox Charles M. Gropper
David Baker Hans Crommenacker Amit Gupta
Anindya Bakshi Tomio Crosley Jeff Guttmacher
Ananth David Culp Rasmus Haahr
Balasubramanian Allen Curtis Christian Habermann
Sunlee Bang Ndifor Cyril Fru Michael Hagerty
M. Jonathan Barkley Jesús Daniel Trigo Jerry Hahn
Gilberto Barrón Eyal Dassau Robert Hall
David Bean David Davenport Nathaniel Hamming
John Bell Russell Davis Rickey L. Hampton
Rudy Belliardi Sushil K. Deka Sten Hanke
Kathryn M. Bennett Ciro de la Vega Aki Harma
Daniel Bernstein Pedro de-las- Jordan Hartmann
George A. Bertos Heras-Quiros Kai Hassing
Chris Biernacki Jim DelloStritto Marc Daniel Haunschild
Ola Björsne Matthew d'Entremont Wolfgang Heck
Thomas Blackadar Lane Desborough Nathaniel Heintzman
Marc Blanchet Kent Dicks Charles Henderson
Thomas Bluethner Hyoungho Do Jun-Ho Her
Douglas P. Bogia Xiaolian Duan Takashi Hibino
Xavier Boniface Brian Dubreuil Timothy L. Hirou
Shannon Boucousis Sourav Dutta Allen Hobbs
Julius Broma Jakob Ehrensvard Alex Holland
Lyle G. Bullock Jr. Fredrik Einberg Arto Holopainen
Bernard Burg Michihiro Enokida Kris Holtzclaw
Chris Burns Javier Escayola Calvo Robert Hoy
Anthony Butt Mark Estes Frank Hsu
© IEEE 2017 – Tous droits réservés
x

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10427:2018(F)
Jeremy Byford-Rew Leonardo Estevez Anne Huang
Satya Calloji Roger Feeley Sen-Der Huang
Xiaoying Cao Hailing Feng Zhiqiang Huang
Carole C. Carey Bosco T. Fernandes Ron Huby
Craig Carlson Christoph Fischer David Hughes
Santiago Carot-Nemesio Morten Flintrup Robert D. Hughes
Jiyoung Huh Sandra Martinez Giovanna Sannino
Hugh Hunter Miguel Martínez Jose A. Santos-Cadenas
Hitoshi Ikeda de Espronceda Cámara Stefan Sauermann
Yutaka Ikeda Peter Mayhew John Sawyer
Philip O. Isaacson Jim McCain Guillaume Schatz
Atsushi Ito László Meleg Alois Schloegl
Michael Jaffe Alexander Mense Paul S. Schluter
Praduman Jain Jinsei Miyazaki Lars Schmitt
Wei Jin Erik Moll Mark G. Schnell
Danny Jochelson Darr Moore Richard A. Schrenker
Phaneeth Junga Carsten Mueglitz Antonio Scorpiniti
Akiyoshi Kabe Piotr Murawski Kwang Seok Seo
Steve Kahle Soundharya Riccardo Serafin
Tomio Kamioka Nagasubramanian Sid Shaw
Kei Kariya Jae-Wook Nah Frank Shen
Andy Kaschl Alex Neefus Bozhi Shi
Junzo Kashihara Trong-Nghia Min Shih
Kohichi Kashiwagi Nguyen-Dobinsky Mazen Shihabi
Ralph Kent Michael E. Nidd Redmond Shouldice
Laurie M. Kermes Tetsu Nishimura Sternly K. Simon
Ikuo Keshi Jim Niswander Marjorie Skubic
Junhyung Kim Hiroaki Niwamoto Robert Smith
Minho Kim Thomas Norgall Ivan Soh
Min-Joon Kim Anand Noubade Motoki Sone
Taekon Kim Yoshiteru Nozoe Emily Sopensky
Tetsuya Kimura Abraham Ofek Rajagopalan Srinivasan
David Klonoff Brett Olive Andreas Staubert
Alfred Kloos Begonya Otal Nicholas Steblay
Jeongmee Koh Marco Paleari Beth Stephen
Jean-Marc Koller Charles Palmer Lars Steubesand
John Koon Bud Panjwani John (Ivo) Stivoric
Patty Krantz Carl Pantiskas Raymond A. Strickland
Raymond Krasinski Harry P. Pappas Chandrasekaran
Alexander Kraus Hanna Park Subramaniam
Ramesh Krishna Jong-Tae Park Hermanni Suominen
Geoffrey Kruse Myungeun Park Lee Surprenant
Falko Kuester Soojun Park Ravi Swami
Rafael Lajara Phillip E. Pash Ray Sweidan
Pierre Landau TongBi Pei Jin Tan
Jaechul Lee Lucian Pestritu Yi Tang
JongMuk Lee Soren Petersen Haruyuyki Tatsumi
Kyong Ho Lee James Petisce John W. Thomas
Rami Lee Peter Piction Jonas Tirén
Sungkee Lee Michael Pliskin Alexandra Todiruta
Woojae Lee Jeff Price Janet Traub
Yonghee Lee Harald Prinzhorn Gary Tschautscher
Joe Lenart Harry Qiu Masato Tsuchid
Kathryn A. Lesh Arif Rahman Ken Tubman
Qiong Li Tanzilur Rahman Yoshihiro Uchida
Ying Li Steve Ray Akib Uddin
© IEEE 2017 – Tous droits réservés
xi

---------------------- Page: 11 ----------------------
ISO/IEEE 11073-10427:2018(F)
Patrick Lichter Phillip Raymond Sunil Unadkat
Jisoon Lim Tim Reilly Fabio Urbani
Joon-Ho Lim Barry Reinhold Philipp Urbauer
John Lin Brian Reinhold Laura Vanzago
Wei-Jung Lo Melvin I. Reynolds Alpo Värri
Charles Lowe John G. Rhoads Dalimar Velez
Don Ludolph Jeffrey S. Robbins Rudi Voon
Christian Luszick Moskowitz Robert Isobel Walker
Bob MacWilliams Chris Roberts David Wang
Srikkanth Timothy Robertson Jerry P. Wang
Madhurbootheswaran Yao Wang
David Rosales
Miriam L. Makhlouf Bill Saltzstein Yi Wang
Romain Marmot Steve Warren
Benedikt Salzbrunn
Fujio Watanabe Will Wykeham Jason Zhang
Toru Watsuji Ariton Xhafa Zhiqiang Zhang
Mike Weng Yaxi Yan Thomas Zhao
Kathleen Wible Ricky Yang Miha Zoubek
Melanie S. Yeung Szymon Zyskoter
Paul Williamson
Jan Wittenber Done-Sik Yoo
Jianchao Zeng
Jia-Rong Wu
Les membres suivants du comité de scrutin individuel ont voté sur cette norme. Les votants peuvent avoir
voté son approbation, sa désapprobation ou s'être abstenus.
Bartien Sayogo
Lyle Bullock Werner Hoelzl
Walter Struppler
Keith Chow Noriyuki Ikeucki
Jan Wittenber
Malcolm Clarke Atsushi Ito
Sourav Dutta Piotr Karocki Paul Work
Oren Yuen
Christoph Fischer Erik Moll
Randall Groves Michael Newman Daidi Zhong

Melvin Reynolds

Lorsque le Conseil des Normes IEEE-SA a approuvé la présente norme le 22 septembre 2016, il comprenait
les membres suivants :
Jean-Philippe Faure, président
Ted Burse, vice-président
John D. Kulick, ancien président
Konstantinos Karachalios, secrétaire
Mehmet Ulema
Chuck Adams Ronald W. Hotchkiss
© IEEE 2017 – Tous droits réservés
xii

---------------------- Page: 12 ----------------------
ISO/IEEE 11073-10427:2018(F)
Yingli Wen
Masayuki Ariyoshi Michael Janezic
Howard Wolfman
Stephen Dukes Joseph L. Koepfinger*
Jianbin Fan Hung Ling Don Wright
Yu Yuan
J. Travis Griffith Kevin Lu
Gary Hoffman Annette D. Reilly Daidi Zhong

Gary Robinson
*Membre émérite
© IEEE 2017 – Tous droits réservés
xiii

---------------------- Page: 13 ----------------------
ISO/IEEE 11073-10427:2018(F)
Introduction
Cette introduction ne fait pas partie de la norme IEEE 11073-10427-2016, Informatique de santé — Communication entre
dispositifs de santé personnels — Partie 10427 : Spécialisation des dispositifs — Moniteur de l'état de puissance des dispositifs
de santé personnels.
Les normes ISO/IEEE 11073 permettent la communication entre des dispositifs médicaux et des systèmes
informatiques externes. Le présent document utilise le cadre optimisé créé dans la
norme ISO/IEEE 11073-20601 et décrit une approche en communication spécifique et interopérable pour
moniteur de l'état de puissance des dispositifs de santé personnels (PHD). Ces normes s'alignent sur les
normes cliniques existantes, et s'en inspirent, pour fournir un support de communication de données depuis
les dispositifs de santé cliniques ou personnels.

© IEEE 2017 – Tous droits réservés
xiv

---------------------- Page: 14 ----------------------
ISO/IEEE 11073-10427:2018(F)
Sommaire Page
1 Vue d’ensemble .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.