Rock drilling equipment — Integral stems

Specifies the dimensions. The 19 mm hexagonal integral stems with forged collared shank shall comply with the dimensions shown in figure 1 and given in table 1. The 22 mm stems shall comply with the dimensions shown in figure 2 and given in table 2. The 25 mm stems shall comply with the dimensions shown in figure 3 and given in table 3.

Matériel de forage des roches — Fleurets monoblocs

Oprema za vrtanje kamnin - Enovito (monoblok) drogovje

General Information

Status
Published
Publication Date
16-Jan-1991
Technical Committee
Drafting Committee
Current Stage
9093 - International Standard confirmed
Completion Date
06-Dec-2022

Relations

Effective Date
15-Apr-2008

Buy Standard

Standard
ISO 721:1991 - Rock drilling equipment -- Integral stems
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 721:1997
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 721:1991 - Matériel de forage des roches -- Fleurets monoblocs
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 721:1991 - Matériel de forage des roches -- Fleurets monoblocs
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ISO
INTERNATIONAL
STANDARD 721
Second edition
1991-01-15
Rock drilling equipment - Integral Sterns
Materie1 de forage des roches - Fleurets monoblocs
Reference number
ISO 721:1991(E)

---------------------- Page: 1 ----------------------
ISO 721:1991(E)
Foreword
ISO (the international Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 721 was prepared by Technical Committee
ISO/TC 82, Mining.
This second edition cancels and replaces the first edition
(ISO 721:1974), which has been technically revised.
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
international Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO 721:1991(E)
INTERNATIONAL STANDARD
Rock drilling equipment - Integral Sterns
ISO 722:1990, Rock drilling equipment - Nollow drill
1 Scope
steels in bar form, hexagonal and round.
This International Standard specifies the dimensions
ISO 723:1990, Rock drilling equipment - Forged col-
of integral Sterns used for rock drilling.
lared shanks and corresponding chuck bushings for
hollow hexagonal drill steels.
2 Normative references
3 Integral Sterns, 19 mm hexagon, with
The following Standards contain provisions which,
forged collared shank
through reference in this text, constitute provisions
of this International Standard. At the time of publi-
The 19 mm hexagonal integral Sterns with forged
cation, the editions indicated were valid. All stan-
collared shank shall comply with the dimensions
dards are subject to revision, and Parties to
shown in figure 1 and given in table 1.
agreements based on this International Standard
are encouraged to investigate the possibility of ap-
Where it is impossible to use the recommended
NOTE 1
plying the most recent editions of the Standards in-
combinations of bit gauges D and lengths L, t
...

SLOVENSKI STANDARD
SIST ISO 721:1997
01-avgust-1997
Oprema za vrtanje kamnin - Enovito (monoblok) drogovje
Rock drilling equipment -- Integral stems
Matériel de forage des roches -- Fleurets monoblocs
Ta slovenski standard je istoveten z: ISO 721:1991
ICS:
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
SIST ISO 721:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 721:1997

---------------------- Page: 2 ----------------------

SIST ISO 721:1997
ISO
INTERNATIONAL
STANDARD 721
Second edition
1991-01-15
Rock drilling equipment - Integral Sterns
Materie1 de forage des roches - Fleurets monoblocs
Reference number
ISO 721:1991(E)

---------------------- Page: 3 ----------------------

SIST ISO 721:1997
ISO 721:1991(E)
Foreword
ISO (the international Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 721 was prepared by Technical Committee
ISO/TC 82, Mining.
This second edition cancels and replaces the first edition
(ISO 721:1974), which has been technically revised.
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
international Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 721:1997
ISO 721:1991(E)
INTERNATIONAL STANDARD
Rock drilling equipment - Integral Sterns
ISO 722:1990, Rock drilling equipment - Nollow drill
1 Scope
steels in bar form, hexagonal and round.
This International Standard specifies the dimensions
ISO 723:1990, Rock drilling equipment - Forged col-
of integral Sterns used for rock drilling.
lared shanks and corresponding chuck bushings for
hollow hexagonal drill steels.
2 Normative references
3 Integral Sterns, 19 mm hexagon, with
The following Standards contain provisions which,
forged collared shank
through reference in this text, constitute provisions
of this International Standard. At the time of publi-
The 19 mm hexagonal integral Sterns wi
...

ISO
NORME
721
INTERNATIONALE
Deuxième édition
1991-01-15
Matériel de forage des roches - Fleurets
monoblocs
Rock drilling equipment - Integral stems
Numéro de référence
ISO 721:1991(F)

---------------------- Page: 1 ----------------------
ISO 721:1991(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
a cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission éiectrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par tes comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 721 a été élaborée par le comité technique
iSO/TC 82, Exploitation minière.
Cette deuxième édition annule et remplace la première édition
(ISO 721:1974), dont elle constitue une révision technique.
0 iso 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 721:1991(F)
NORME INTERNATIONALE
Matériel de forage des roches - Fleurets monoblocs
ISO 722:1990, Matériel de forage des roches - Bar-
1 Domaine d’application
res creuses, hexagonales et rondes pour f7eurets.
La présente Norme internationale prescrit les di-
ISO 723:1990, Matériel de forage des roches -
mensions des fleurets monoblocs utilisés pour le
Emmanchements à collerette forgée et douilles
forage des roches.
porte-outils pour f7eurets hexagonaux creux.
2 Références normatives
3 Fleurets monoblocs hexagonaux de
Les normes suivantes contiennent des dispositions 19 mm avec emmanchement à collerette
qui, par suite de la référence qui en est faite,
forgée
constituent des dispositions valables pour la pré-
sente Norme internationale. Au moment de la pu-
Les fleurets monoblocs hexagonaux de 19 mm avec
blication, les éditions indiquées étaient en vigueur.
emmanchement à collerette forgée doivent être
Toute norme est sujette à révision et les parties
conformes aux dimensions indiquées à la figure 1
prenantes des accords fondés sur la présente
et dans le tableau 1.
Norme internationale sont invitées a rechercher la
possibilité d’appliquer les éditions les plus récentes
S’il n’est pas possible d’utiliser les combinai-
NOTE 1
des normes indiquées ci-après. Les membres de la
...

ISO
NORME
721
INTERNATIONALE
Deuxième édition
1991-01-15
Matériel de forage des roches - Fleurets
monoblocs
Rock drilling equipment - Integral stems
Numéro de référence
ISO 721:1991(F)

---------------------- Page: 1 ----------------------
ISO 721:1991(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
a cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission éiectrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par tes comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 721 a été élaborée par le comité technique
iSO/TC 82, Exploitation minière.
Cette deuxième édition annule et remplace la première édition
(ISO 721:1974), dont elle constitue une révision technique.
0 iso 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 721:1991(F)
NORME INTERNATIONALE
Matériel de forage des roches - Fleurets monoblocs
ISO 722:1990, Matériel de forage des roches - Bar-
1 Domaine d’application
res creuses, hexagonales et rondes pour f7eurets.
La présente Norme internationale prescrit les di-
ISO 723:1990, Matériel de forage des roches -
mensions des fleurets monoblocs utilisés pour le
Emmanchements à collerette forgée et douilles
forage des roches.
porte-outils pour f7eurets hexagonaux creux.
2 Références normatives
3 Fleurets monoblocs hexagonaux de
Les normes suivantes contiennent des dispositions 19 mm avec emmanchement à collerette
qui, par suite de la référence qui en est faite,
forgée
constituent des dispositions valables pour la pré-
sente Norme internationale. Au moment de la pu-
Les fleurets monoblocs hexagonaux de 19 mm avec
blication, les éditions indiquées étaient en vigueur.
emmanchement à collerette forgée doivent être
Toute norme est sujette à révision et les parties
conformes aux dimensions indiquées à la figure 1
prenantes des accords fondés sur la présente
et dans le tableau 1.
Norme internationale sont invitées a rechercher la
possibilité d’appliquer les éditions les plus récentes
S’il n’est pas possible d’utiliser les combinai-
NOTE 1
des normes indiquées ci-après. Les membres de la
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.