ISO 10303-111:2007
(Main)Industrial automation systems and integration — Product data representation and exchange — Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes
Industrial automation systems and integration — Product data representation and exchange — Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes
ISO 10303-111:2007 represents shape elements available in modern CAD systems in a manner suitable for use in procedural or construction history modelling.
Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 111: Ressources d'application intégrée: Éléments pour la modélisation procédurale des formes solides
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 10303-111
First edition
2007-05-15
Industrial automation systems and
integration — Product data
representation and exchange —
Part 111:
Integrated application resource: Elements
for the procedural modelling of solid
shapes
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 111: Ressources d'application intégrée: Éléments pour la
modélisation procédurale des formes solides
Reference number
ISO 10303-111:2007(E)
©
ISO 2007
---------------------- Page: 1 ----------------------
ISO 10303-111:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 10303-111:2007(E)
Contents Page
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Terms, definitions and abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.1 Terms defined in ISO 10303-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.2 Terms defined in ISO 10303-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.3 Terms defined in ISO 10303-42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.4 Terms defined in ISO 10303-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.5 Terms defined in ISO 10303-55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.6 Terms defined in ISO 10303-108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.7 Other terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.8 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 Solid shape element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.2 Fundamental concepts and assumptions . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3 Solid shape element type definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.3.1 base solid select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.3.2 blend end condition select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3.3 generalized surface select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3.4 trim condition select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3.5 blend radius variation type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3.6 trim intent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.4 Solid shape element entity definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4.1 modified solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4.2 edge blended solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.4.3 track blended solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.4.4 track blended solid with end conditions . . . . . . . . . . . . . . . . . . . . . 13
4.4.5 solid with constant radius edge blend . . . . . . . . . . . . . . . . . . . . . . 15
4.4.6 solid with variable radius edge blend . . . . . . . . . . . . . . . . . . . . . . . 17
4.4.7 solid with chamfered edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.4.8 solid with single
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.