Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide

The method of ISO 11427:2014 describes a volumetric method for the determination of silver in jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain copper, zinc, cadmium, and palladium. Apart from palladium, which must be precipitated before commencing titration, these elements do not interfere with this method of determination. This method is intended to be used as the referee method for the determination of fineness in alloys covered by ISO 9202.

Joaillerie, bijouterie — Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le bromure de potassium

La méthode de l'ISO 11427:2014 décrit une méthode volumétrique de dosage de l'argent dans les alliages utilisés en bijouterie-joaillerie, compris de préférence dans les limites de titre indiquées dans l'ISO 9202. Ces alliages peuvent contenir du cuivre, du zinc, du cadmium et du palladium. À part le palladium qu'il faut précipiter avant de commencer le titrage, ces éléments ne gênent pas le dosage. La présente méthode est destinée à servir de référence pour la détermination du titre des alliages traités dans l'ISO 9202.

General Information

Status
Published
Publication Date
28-Oct-2014
Current Stage
9092 - International Standard to be revised
Completion Date
06-Oct-2021
Ref Project

Relations

Buy Standard

Standard
ISO 11427:2014 - Jewellery -- Determination of silver in silver jewellery alloys -- Volumetric (potentiometric) method using potassium bromide
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 11427:2014 - Joaillerie, bijouterie -- Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie -- Méthode volumétrique (potentiométrique) utilisant le bromure de potassium
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11427
Second edition
2014-11-01
Jewellery — Determination of silver in
silver jewellery alloys — Volumetric
(potentiometric) method using
potassium bromide
Joaillerie, bijouterie — Dosage de l’argent dans les alliages
d’argent pour la bijouterie-joaillerie — Méthode volumétrique
(potentiométrique) utilisant le bromure de potassium
Reference number
ISO 11427:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 11427:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11427:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents . 1
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 2
7.1 Determination of potassium bromide factor . 2
7.2 Determination . 3
8 Calculation and expression of results . 3
8.1 Calculation . 3
8.2 Repeatability . 3
9 Test report . 4
Bibliography . 5
© ISO 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 11427:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 174, Jewellery.
This second edition cancels and replaces the first edition (ISO 11427:1993) which has been technically
revised with the following changes:
a) change of requirement for sampling in Clause 6;
b) addition of a warning in Clause 7 that suitable health and safety procedures should be followed;
c) addition of the possibility to use watch glasses in 7.1.1 to cover the beaker;
d) deletion of the specified volume of water in 7.1.1;
e) addition in 7.1.3 that a potassium bromide standard solution is used;
f) change in 8.1 from potassium chloride to potassium bromide;
g) standard editorially revised.
iv © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 11427:2014(E)

Introduction
The following definitions apply in understanding how to implement an ISO International Standard and
other normative ISO deliverables (TS, PAS, IWA).
— “shall” indicates a requirement
— “should” indicates a recommendation
— “may” is used to indicate that something is permitted
— “can” is used to indicate that something is possible, for example, that an organization or individual
is able to do something
3.3.1 of the ISO/IEC Directives, Part 2 (sixth edition, 2011) defines a requirement as an “expression in
the content of a document conveying criteria to be fulfilled if compliance with the document is to be
claimed and from which no deviation is permitted.”
3.3.2 of the ISO/IEC Directives, Part 2 (sixth edition, 2011) defines a recomme
...

NORME ISO
INTERNATIONALE 11427
Deuxième édition
2014-11-01
Joaillerie, bijouterie — Dosage de
l’argent dans les alliages d’argent pour
la bijouterie-joaillerie — Méthode
volumétrique (potentiométrique)
utilisant le bromure de potassium
Jewellery — Determination of silver in silver jewellery alloys —
Volumetric (potentiometric) method using potassium bromide
Numéro de référence
ISO 11427:2014(F)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 11427:2014(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2014
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2014 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 11427:2014(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Principe . 1
4 Réactifs . 1
5 Appareillage . 2
6 Échantillonnage . 2
7 Mode opératoire. 2
7.1 Détermination du facteur du bromure de potassium. 2
7.2 Dosage . 3
8 Calcul et expression des résultats . 3
8.1 Calculs . 3
8.2 Répétabilité . 4
9 Rapport d’essai . 4
Bibliographie . 5
© ISO 2014 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 11427:2014(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l’élaboration
du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de brevets reçues par
l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à l’évaluation de
la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes de l’OMC concernant
les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos — Informations
supplémentaires.
Le comité chargé de l’élaboration du présent document est l’ISO/TC 174, Joaillerie, bijouterie.
Cette deuxième édition annule et remplace la première édition (ISO 11427:1993), qui a fait l’objet d’une
révision technique. Les modifications sont les suivantes:
a) modification d’exigence pour l’échantillonnage à l’Article 6;
b) ajout d’un avertissement à l’Article 7, spécifiant qu’il convient de suivre des procédures adéquates
en matière de santé et de sécurité;
c) ajout de la possibilité d’utiliser des verres de montres en 7.1.1 pour couvrir le bécher;
d) suppression du volume d’eau spécifié au 7.1.1;
e) ajout au 7.1.3 spécifiant qu’une solution étalon de bromure de potassium est utilisée;
f) au 8.1, remplacement du chlorure de potassium par le bromure de potassium;
g) norme révisée au niveau éditorial.
iv © ISO 2014 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 11427:2014(F)

Introduction
Les définitions suivantes permettent de comprendre la manière dont les Normes internationales et les
autres documents normatifs ISO (Spécification technique, Spécification publiquement disponible ou
Accord international d’atelier) doivent être appliqués:
— le verbe «devoir» indique une exigence,
— l’expression «il convient de» indique une recommandation,
— en anglais, l’auxiliaire «may» («pouvoir» en français) est utilisé pour indiquer que quelque chose
est autorisé et
— l’auxiliaire «can» (également «pouvoir» en français) est employé pour indiquer que quelque chose
est possible, par exemple, qu’une organisation ou un individu est susceptible de faire quelque chose.
Le paragraphe 3.3.1 des Directives ISO/IEC, Partie 2 (sixième édition, 2011) définit une exigence comme
une « expression dans le contenu d’un document formulant les critères à respecter afin de prétendre à
la conformité avec le document, et avec lesquels aucun écart n’est permis ».
Le paragraphe 3.3.2 des Directives ISO/IEC, Partie 2 (sixième édition, 2011) définit une recommandation
comme une
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.