Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

ISO/TS 289-4 specifies a method of use of a shearing-disc viscometer for measuring the Mooney stress-relaxation rate (MSR) of uncompounded or compounded, unvulcanized rubbers, characterizing the elastic response of those materials next to the viscous response as measured by the Mooney viscosity. The intended use of this document is on quality control measurements.

Caoutchouc non vulcanisé — Déterminations utilisant un consistomètre à disque de cisaillement — Partie 4: Détermination du taux de relaxation de contrainte Mooney

L'ISO/TS 289-4 spécifie une méthode utilisant un consistomètre à disque de cisaillement pour mesurer le taux de relaxation de contrainte Mooney (MSR) des caoutchoucs non vulcanisés, sous forme de mélange ou non, caractérisant la réponse élastique de ces matériaux ainsi que la réponse visqueuse mesurée par l'indice consistométrique Mooney. L'utilisation prévue de ce document concerne les mesures de contrôle qualité.

General Information

Status
Published
Publication Date
02-Oct-2017
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project

Relations

Buy Standard

Technical specification
ISO/TS 289-4:2017 - Rubber, unvulcanized -- Determinations using a shearing-disc viscometer
English language
13 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
ISO/TS 289-4:2017 - Caoutchouc non vulcanisé -- Déterminations utilisant un consistometre a disque de cisaillement
French language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 289-4
First edition
2017-09
Rubber, unvulcanized —
Determinations using a shearing-disc
viscometer —
Part 4:
Determination of the Mooney stress-
relaxation rate
Caoutchouc non vulcanisé — Déterminations utilisant un
consistomètre à disque de cisaillement —
Partie 4: Détermination du taux de relaxation de contrainte Mooney
Reference number
ISO/TS 289-4:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO/TS 289-4:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 289-4:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Calibration . 3
7 Preparation of test piece . 3
8 Temperature and duration of the test . 3
9 Procedure. 4
10 Calculation and expression of results . 4
11 Precision . 6
12 Test report . 6
Annex A (informative) Precision statement . 7
Annex B (normative) Calibration schedule .11
Bibliography .12
© ISO 2017 – All rights reserved iii

---------------
...

SPÉCIFICATION ISO/TS
TECHNIQUE 289-4
Première édition
2017-09
Caoutchouc non vulcanisé —
Déterminations utilisant un
consistomètre à disque de
cisaillement —
Partie 4:
Détermination du taux de relaxation
de contrainte Mooney
Rubber, unvulcanized — Determinations using a shearing-disc
viscometer —
Part 4: Determination of the Mooney stress-relaxation rate
Numéro de référence
ISO/TS 289-4:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO/TS 289-4:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/TS 289-4:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Appareillage . 2
6 Étalonnage . 4
7 Préparation de l’éprouvette . 4
8 Température et durée de l’essai . 4
9 Mode opératoire. 4
10 Calcul et expression des résultats . 4
11 Fidélité . 6
12 Rapport d’essai . 6
Annexe A (informative) Déclaration de fidélité . 7
Annexe B (normative) Programme d’étalonnage .11
Bibliographie .12
© ISO 2017 – Tous droits réservés iii

------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.