iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 12604-2:2024

(Main)

Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines

Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines

This document specifies the requirements of baggage handling for individual pieces of baggage checked-in by airline passengers at airports to be carried into aircraft cargo holds. This document applies to all manual handling workplaces in the processing chain for sorting, safety handling and routing of the baggage (containers and bulk baggage, departure and arrival circuits, at terminal and at aircraft, excluding passenger check-in process). This document does not specify the baggage handling systems in and out of airport terminals, except the baggage weights and dimensions to be handled, and the critical characteristics of manual workstations. This document does not specify the aircraft loading system.

Traitement au sol des aéronefs — Bagages enregistrés — Partie 2: Exigences et directives de traitement

Le présent document spécifie les exigences de traitement des bagages pour les bagages (anglais: «individual pieces of baggage») enregistrés par les passagers aériens aux aéroports aux fins de transport en soute des aéronefs. Le présent document est applicable à tous les postes de manutention manuelle dans la chaîne de traitement du tri, de la manutention pour la sûreté et de l'acheminement des bagages (conteneurs et bagages vrac, circuits départ et arrivée, en aérogare et à l'avion, en excluant le processus d’enregistrement passagers). Le présent document ne spécifie pas les systèmes de traitement de bagages en aérogares, à l’exception des poids et des dimensions des bagages à manipuler et des caractéristiques critiques des postes de travail manuels. Le présent document ne spécifie pas le système de chargement des aéronefs.

General Information

Status
Published
Publication Date
01-Feb-2024
ICS
49.100 - Ground service and maintenance equipment
Technical Committee
ISO/TC 20/SC 9 - Air cargo and ground equipment
Drafting Committee
ISO/TC 20/SC 9 - Air cargo and ground equipment
Current Stage
6060 - International Standard published
Start Date
02-Feb-2024
Due Date
19-Feb-2024
Completion Date
02-Feb-2024
Ref Project

Buy Standard

ISO 12604-2:2024 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:2. 02. 2024ISO 12604-2:2024 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:2. 02. 2024
PreviousNext
Standard
ISO 12604-2:2024 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:2. 02. 2024
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023
PreviousNext
Draft
ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023REDLINE ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023
PreviousNext
Draft
REDLINE ISO/PRF 12604-2 - Aircraft ground handling — Checked baggage — Part 2: Handling requirements and guidelines Released:30. 11. 2023
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 12604-2
First edition
Aircraft ground handling —
2024-02
Checked baggage —
Part 2:
Handling requirements and
guidelines
Traitement au sol des aéronefs — Bagages enregistrés —
Partie 2: Exigences et directives de traitement
Reference number
ISO 12604-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 12604-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 12604-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and recommendations . 3
4.1 General .3
4.1.1 The different characteristics of piece of baggage encouraging specific processing .3
4.1.2 The different workstations concerned .3
4.2 Conditions required for an acceptable manual handling .4
4.2.1 Risk evaluation method related to baggage handling conditions .4
4.2.2 Step 1: Handling frequency and anticipation of load .6
4.2.3 Step 2: Maximum acceptable load (MAL) .8
4.2.4 Step 3: Acceptable cumulative mass (ACM) and walking distance .9
4.3 Operator and handling company's responsibilities . 12
4.3.1 Handling conditions evaluation and adaptation . 12
4.3.2 Affirmative action set up . 12
Annex A (informative) Examples of measures allowing baggage to be conveyed through
automated transfer and sorting facilities .13
Bibliography . 14

© ISO 2024 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO 12604-2:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standard
...

INTERNATIONAL ISO
STANDARD 12604-2
First edition
Aircraft ground handling — Checked
baggage —
Part 2:
Handling requirements and guidelines
Traitement au sol des aéronefs — Bagages enregistrés —
Partie 2: Exigences et directives de traitement
PROOF/ÉPREUVE
Reference number
ISO 12604-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12604-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12604-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and recommendations . 3
4.1 General . 3
4.1.1 The different characteristics of piece of baggage encouraging specific
processing . 3
4.1.2 The different workstations concerned . 3
4.2 Conditions required for an acceptable manual handling . 4
4.2.1 Risk evaluation method related to baggage handling conditions . 4
4.2.2 Step 1: Handling frequency and anticipation of load . 6
4.2.3 Step 2: Maximum acceptable load (MAL) . 8
4.2.4 Step 3: Acceptable cumulative mass (ACM) and walking distance . 9
4.3 Operator and handling company's responsibilities .12
4.3.1 Handling conditions evaluation and adaptation .12
4.3.2 Affirmative action set up .12
Annex A (informative) Examples of measures allowing baggage to be conveyed through
automated transfer and sorting facilities .13
Bibliography .14
iii
© ISO 2023 – All rights reserved PROOF/ÉPREUVE

---------------------- Page: 3 ----------------------
ISO 12604-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodie
...

ISO/PRF 12604-2:2023 (E)
ISO/TC 20/SC 9
Secretariat: AFNOR
Date: 2023-10-1911-30
Aircraft ground handling — Checked baggage —
Part 2:
Handling requirements and guidelines
Traitement au sol des aéronefs — Bagages enregistrés —
Partie 2: Exigences et directives de traitement
PROOF
© ISO 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/PRF 12604-2:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 12604-2:2023(E)
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and recommendations . 3
4.1 General . 3
4.1.1 The different characteristics of piece of baggage encouraging specific processing . 3
4.1.2 The different workstations concerned . 3
4.2 Conditions required for an acceptable manual handling . 4
4.2.1 Risk evaluation method related to baggage handling conditions . 4
4.2.2 Step 1: Handling frequency and anticipation of load . 6
4.2.3 Step 2: Maximum acceptable load (MAL) . 9
4.2.4 Step 3: Acceptable cumulative mass (ACM) and walking distance . 10
4.3 Operator and handling company's responsibilities . 13
4.3.1 Handling conditions evaluation and adaptation . 13
4.3.2 Affirmative action set up . 13
Annex A (informative) Examples of measures allowing baggage to be conveyed through automated
transfer and sorting facilities . 15
Bibliography . 16

© ISO 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/PRF 12604-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-go
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 8267-2:2023(Main)
Aircraft — Tow bar attachment fittings interface requirements — Part 2: Regional aircraft

This document specifies the interface requirements for tow bar attachment fittings on the nose gear (when towing operations are performed from the nose gear) of conventional tricycle type landing gears of commercial civil transport aircraft. This document is applicable to all new models of regional aircraft within the specified maximum ramp mass range which enter service or are designed after its date of publication. It does not apply to previously in-service regional aircraft models, which present a considerable variety of tow bar attachment fittings. However, a simple retrofit modification is described that can make certain in-service fittings compatible with a tow bar head in conformity with this document, where deemed appropriate in order to facilitate operation of such aircraft types at airports. This document is applicable to regional commercial transport aircraft airworthiness certified with a maximum ramp mass of ≤ 50 000 kg (110 000 lb). It does not apply to: — aircraft airworthiness certified as commuter category aeroplanes; — aircraft airworthiness certified as main line aircraft with a maximum ramp mass of > 50 000 kg (110 000 lb), which are covered by ISO 8267-1.

  • Standard
    5 pages
    English language
    sale 15% off
  • Draft
    5 pages
    English language
    sale 15% off
  • Draft
    5 pages
    English language
    sale 15% off
ISO
ISO 12604-3:2022(Main)
Aircraft ground handling — Checked baggage — Part 3: Workstation ergonomics

This document specifies the requirements for workstation ergonomic design of baggage handling agents for individual pieces of baggage checked-in by airline passengers at airports to be carried into aircraft cargo holds. This document applies to all manual handling workplaces in the processing chain for sorting, safe handling and routing of the baggage (containers and bulk baggage, departure and arrival circuits, at terminal and at aircraft, excluding passenger check-in process and loading into aircraft cargo holds). This document doesn't apply to manual handling of odd-sized baggage. This document does not specify the baggage handling systems in and out of airport terminals, except the baggage weights and dimensions to be handled and the critical characteristics of manual workstations. This document does not specify the baggage handling systems in the aircraft.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 21100:2020(Main)
Air cargo unit load devices — Performance requirements and test parameters

This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD). This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a prerequisite, it is presupposed that the applicable general civil aviation requirements and the aircraft manufacturer's approved Weight and Balance Manual are followed. This document defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of EASA CS-25 or 14 CFR Part 25, except for the 9,0 g forward ultimate inertia force of § 25.561(b) (3) (ii). This document applies to airworthiness approved air cargo unit load devices intended for carriage on board civil transport category airplanes type certificated under EASA CS-25 or 14 CFR Part 25, or equivalent. This document exclusively applies to unit load devices airworthiness approval and testing parameters. It does not apply to aircraft design or aircraft operating requirements, which are provided by the approved Weight and Balance Manual for each aircraft type. Other aspects that do not directly pertain to air cargo unit load devices airworthiness approval and testing are not covered by this document and are defined in other International Standards (see Bibliography), e.g.: — ULD design specifications, — ULD in service damage limits, — ULD restraint malfunction limitations, — ULD test methods, — ULD load distribution models, — ULD maximum allowable contours, — ULD CG (centre for gravity) location control means, — ULD pressure equalization methods, — ULD utilization guidelines. Air cargo unit load devices qualified prior to publication of this document were approved in accordance with the requirements of ISO 8097:2001. This document is intended as a TSO approval reference for all new models of unit load devices in the sizes and types it covers, in replacement of ISO 8097. For air cargo unit load devices the size or type of which is not covered in this document, see the requirements of ISO 8097:2001, if their size or type is contained therein, or other equivalent criteria, if not. NOTE 1 ISO 8097 is based on USA National Aerospace Standard NAS 3610 revision 10:1990, Specification for Cargo Unit Load Devices. NOTE 2 The requirements for cargo covers are not defined in this document, except insofar as net restraint is incorporated therein.

  • Standard
    46 pages
    English language
    sale 15% off
  • Draft
    46 pages
    English language
    sale 15% off
ISO
ISO 2026:2020(Main)
Aircraft — Connections for starting engines by air

This document specifies the dimensions of connections for starting aircraft engines by air, which are necessary to ensure international interchangeability of connectors with adaptors. lt also gives the minimum clearances required on the aircraft to provide adequate access for the ground adaptor.

  • Standard
    5 pages
    English language
    sale 15% off
  • Draft
    5 pages
    English language
    sale 15% off
ISO
ISO 21785:2020(Main)
Air cargo unit load devices — Load distribution model

This document defines the industry agreed model for load distribution on air cargo unit load devices (ULD) bases to apply the maximum allowable centre of gravity (C.G.) eccentricity. Its purpose is to establish a common reference load distribution algorithm for: a) comparable and repeatable ULD testing methods, or equivalent numeric simulations; b) aircraft structure and cargo systems design assumptions, consistent with existing airframers practices; and c) definition of operators unit load devices utilization rules and cargo build-up training programs. It applies to all types of unit load devices intended for use on board civil transport aircraft and airworthiness approved in accordance with the performance requirements and testing parameters of either ISO 21100 or, as applicable, ISO 8097. It also applies to non-airworthiness approved (non-certified) containers as defined in ISO 4118, the utilisation of which is controlled by the provisions of the aircraft type's Weight and Balance Manual and other airframe manufacturer's documents.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 11076:2020(Main)
Aircraft — Deicing/anti-icing methods on the ground

This document establishes the minimum requirements for deicing/anti-icing methods on the ground of main line and regional airplanes, in accordance with ICAO, Document 9640-AN/9401) and the relevant civil aviation requirements, to facilitate the safe operation of main line and regional civil transport airplanes during icing conditions. This document does not specify requirements for specific aircraft model types. Airlines' published manuals, procedures or methods supplement the information contained in this document. Frost, ice or snow deposits, which can seriously affect the aerodynamic performance and/or controllability of an aircraft, are effectively removed by the application of the procedures specified in this document. It is the airplane operator's responsibility to consult airplane manufacturer's aircraft operations manual, aircraft maintenance manual and service letters to determine any limitations/restrictions relating to the use of deicing/anti-icing methods meeting this document for the type and model of airplane to be treated.

  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 11532:2018(Main)
Aircraft ground equipment — Graphical symbols

ISO 11532:2018 establishes common graphical symbols for use on all types of aircraft ground support equipment. They have been compiled for the benefit of those who deal with such equipment, such as airlines, airport handling agencies, airport authorities, manufacturers, etc., in order to facilitate fast and accurate identification of controls, indicators and decals of powered and unpowered equipment. The presentation of this document is based on the recommendations of ISO/TC 145, Graphical symbols. ISO 11532:2018 is also intended to promote standardization of terms for controls, indicators, etc. for aircraft ground support equipment and alleviate language problems. These graphical symbols are intended to be placed on all new equipment and retrofitted on all existing equipment as far as possible. NOTE This document is intended to be read with the documents listed in the bibliography.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    36 pages
    French language
    sale 15% off
ISO
ISO 1464:2018(Main)
Aerospace — Tripod jacks — Clearance dimensions

ISO 1464:2018 specifies the minimum clear space to be provided beneath the aircraft main jacking points, in order to accommodate tripod jacks and thus ensure adequate clearance between the jacks and the adjacent aircraft structure. ISO 1464:2018 is not intended to define fully all jack clearance dimensions. In situations where clearances are critical, it is used as a design aid only. Final critical clearances are established by using actual jack dimensions.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 10842:2017(Main)
Aircraft — Ground service connections — Locations and types

ISO 10842:2017 specifies the locations and types of aircraft ground service connections in order to optimize ground services both fixed and mobile, for the seven different services hereafter: - 400 Hz electrical power; - preconditioned air for cabin conditioning; - pneumatic power for jet engine start; - potable water; - lavatory service (draining, flushing); - aircraft refuelling; - interphone (headset) connections. It focuses on these aircraft services because: - these connections are those most frequently used during aircraft airport turnaround operations; - in terms of economic benefit, they have the greatest impact through improved efficiency. ISO 10842:2017 is intended to apply to any new type of main line commercial transport category aircraft designed or built after its publication. In addition, it is expected that any substantially modified new derivative aircraft type in the same category (derived from a previously existing type) will, insofar as technically and economically practical, meet the requirements of this document, if specified in the aircraft type specification established between customer airline(s) and manufacturer. It is not the intent of this document to restrict in any way the basic design of any future types of civil passenger transport aircraft. It aims, however, at clarifying for aircraft design engineers the design characteristics which would make it difficult or impossible for a new type of aircraft to be adequately serviced from existing airport facilities. Should basic aircraft design requirements impose on a future model certain characteristics not complying with the present document: - either alternative methods of servicing the aircraft will have to be implemented; or - existing facilities in the airports where such a new type of aircraft is to operate will require some degree of modification/rework; or - additional interface devices/equipment will be required in order to service such a new type of aircraft; in either case resulting in increased aircraft servicing constraints and operating cost.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 9667:2017(Main)
Aircraft ground support equipment — Tow bars

ISO 9667:2017 specifies dimensional and physical requirements of tow bar connections to tractor and aircraft (see Figure 1). It is applicable to any new type of commercial transport category aircraft tow bar designed or built after publication of ISO 9667:2017. The purpose of ISO 9667:2017 is to standardize tow bar attachments to airplane and tractor according to the mass category of the towed aircraft, so that one tow bar head with different shear levels can be used for all aircraft that are within the same mass category and are manufactured in compliance with ISO 8267.

  • Standard
    8 pages
    English language
    sale 15% off