Optics and photonics — Vocabulary for telescopic systems — Part 5: Terms for night vision devices

ISO 14132-5:2008 gives terms and definitions for night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night, rescue actions under low light conditions, urgent repairs in the dark, night-time surveillance, and research in the near infrared or ultraviolet regions.

Optique et photonique — Vocabulaire relatif aux systèmes télescopiques — Partie 5: Termes pour les dispositifs de vision de nuit

L'ISO 14132-5:2008 donne les termes et les définitions relatifs aux dispositifs de vision de nuit, tels que jumelles, monoculaires et lunettes utilisés pour des observations de nuit, des actions de sauvetage dans des conditions de faible éclairage, des réparations urgentes dans l'obscurité, la surveillance de nuit et la recherche dans les régions du proche infrarouge ou ultraviolet.

General Information

Status
Published
Publication Date
15-Jul-2008
Current Stage
9092 - International Standard to be revised
Completion Date
29-Jan-2024
Ref Project

Buy Standard

Standard
ISO 14132-5:2008
English language
26 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO

STANDARD 14132-5
NORME
First edition
Première édition
INTERNATIONALE
Первое издание
2008-08-01
МЕЖДУНАРОДНЫЙ
СТАНДАРТ
Optics and photonics — Vocabulary for
telescopic systems —
Part 5:
Terms for night vision devices
Optique et photonique — Vocabulaire
relatif aux systèmes télescopiques —
Partie 5:
Termes pour les dispositifs de vision
de nuit
Оптика и фотоника — Словарь по
телескопическим системам —
Чaсть 5:

Термины по приборам ночного
видения



Reference number
Numéro de référence
Номер ссылки
ISO 14132-5:2008(E/F/R)
©
 ISO 2008

---------------------- Page: 1 ----------------------
ISO 14132-5:2008(E/F/R)

COPYRIGHT PROTECTED DOCUMENT
DOCUMENT PROTÉGÉ PAR COPYRIGHT
ДОКУМЕНТ ОХРАНЯЕМЫЙ АВТОРСКИМ ПРАВОМ


©  ISO 2008
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
Воспроизведение терминов и определений, содержащихся в настоящем Международном стандарте, разрешается в учебных
пособиях, руководствах по эксплуатации, публикациях и журналах технического характера, предназначенных исключительно для
обучения или для практического исполнения. Подобное воспроизведение должно осуществляться на следующих условиях:
термины и определения не должны подвергаться никаким изменениям; воспроизведение запрещается в словарях и других
сходных изданиях, предназначенных для продажи; настоящий Международный стандарт должен цитироваться как
первоисточник.
Кроме вышеперечисленных исключений, никакая другая часть данной публикации не подлежит ни воспроизведению, ни
использованию в какой бы то ни было форме и каким бы то ни было способом, электронным или механическим, включая
фотокопии и микрофильмы, без письменного согласия либо ИСО, которое может быть получено по адресу, приводимому ниже,
либо комитета члена ИСО в стране лица, подающего запрос.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse/Oтпeчaтaнo в Швeйцaрии

ii © ISO 2008 – All rights reserved/Tous droits réservés/Все права сохранены

---------------------- Page: 2 ----------------------
ISO 14132-5:2008(E/F/R)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visua
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.