Steel and iron castings — Visual testing of surface quality

1.1 This document covers the acceptance criteria for the visual testing of the surface of steel and iron castings. 1.2 Acceptance levels utilize Bureau de Normalisation des Industries de la Fonderie (BNIF) and Steel Castings Research and Trade Association (SCRATA) or Casting Technology International (CTI) reference comparators for the visual determination of surface roughness and surface discontinuities described as follows: — surface roughness; — thermal dressing; — mechanical dressing; — non-metallic inclusions; — gas porosity; — fusion discontinuities; — expansion discontinuities; — metal inserts.

Pièces moulées en acier ou en fonte — Contrôle visuel de l'état de surface

General Information

Status
Published
Publication Date
12-Jan-2020
Current Stage
6060 - International Standard published
Start Date
13-Jan-2020
Due Date
25-Jul-2021
Completion Date
13-Jan-2020
Ref Project

Relations

Buy Standard

Standard
ISO 11971:2020 - Steel and iron castings -- Visual testing of surface quality
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11971
Third edition
2020-01
Steel and iron castings — Visual
testing of surface quality
Pièces moulées en acier ou en fonte — Contrôle visuel de l'état de
surface
Reference number
ISO 11971:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 11971:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11971:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative References . 1
3 Terms and Definitions . 1
4 Ordering information . 1
5 Test method . 2
6 Acceptance criteria . 2
7 Test report . 3
Annex A (informative) . 4
Bibliography . 5
© ISO 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 11971:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 11, Steel
castings.
This third edition cancels and replaces the second edition (ISO 11971:2008), which has been technically
revised. The main changes compared to the previous edition are as follows:
— “Normative References” added as new Clause 2 and “Terms and Definitions” added as new Clause 3;
subsequent Clauses were renumbered
— Correction in Clause 5 (previously Clause 3) regarding the use of SCRATA comparators for iron
castings
— Table 3 and Table 4 in the previous edition were moved to new Annex A
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 11971:2020(E)

Introduction
The surface roughness of a casting is influenced by the manufacturing process (moulding, grinding,
finishing, etc.), the moulding materials used (sand, coating, etc.), the equipment available and the
alloy cast.
Since cast surfaces do not exhibit the same cyclic regularity as machined surfaces, it is difficult to
evaluate their roughness using conventional mechanical, optical, or pneumatic devices.
The use of visual/tactile comparators is therefore preferred in these circu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.