Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS)

ISO/TS 16727:2013 specifies a method for the determination of mercury in aqua regia or nitric acid digests of sludge, treated biowaste and soil, obtained according to ISO 11466 or ISO 16729 using cold vapour atomic fluorescence spectrometry. The lower working range limit is 0,003 mg/kg (dry matter).

Qualité du sol — Dosage du mercure — Spectrométrie de fluorescence atomique à vapeur froide (CVAFS)

General Information

Status
Published
Publication Date
27-Aug-2013
Current Stage
9093 - International Standard confirmed
Completion Date
16-Feb-2024
Ref Project

Buy Standard

Technical specification
ISO/TS 16727:2013 - Soil quality -- Determination of mercury -- Cold vapour atomic fluorescence spectrometry (CVAFS)
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
ISO/TS 16727:2013 - Soil quality -- Determination of mercury -- Cold vapour atomic fluorescence spectrometry (CVAFS)
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 16727
First edition
2013-09-15
Corrected version
2013-10-01
Soil quality — Determination of
mercury — Cold vapour atomic
fluorescence spectrometry (CVAFS)
Qualité du sol — Dosage du mercure — Spectrométrie de fluorescence
atomique à vapeur froide (CVAFS)
Reference number
ISO/TS 16727:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO/TS 16727:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 16727:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Interferences . 1
5 Reagents . 2
6 Apparatus . 3
6.1 Usual laboratory apparatus . 3
6.2 Atomic fluorescence spectrometer (AFS) . 3
6.3 Automated sample introduction system . 3
7 Procedure. 4
7.1 Test sample solution . 4
7.2 Test blank solution . 4
7.3 Preparation of the calibration solutions . 4
7.4 Calibration . 4
7.5 Measurement of test sample . 4
8 Calculation and expression of results . 5
8.1 Calculation .
...

TECHNICAL ISO/TS
SPECIFICATION 16727
First edition
Soil quality — Determination of
mercury — Cold vapour atomic
fluorescence spectrometry (CVAFS)
Qualité du sol — Dosage du mercure — Spectrométrie de fluorescence
atomique à vapeur froide (CVAFS)
PROOF/ÉPREUVE
Reference number
ISO/TS 16727:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO/TS 16727:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 16727:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Interferences . 1
5 Reagents . 2
6 Apparatus . 3
6.1 Usual laboratory apparatus . 3
6.2 Atomic fluorescence spectrometer (AFS) . 3
6.3 Automated sample introduction system . 3
7 Procedure. 4
7.1 Test sample solution . 4
7.2 Test blank solution . 4
7.3 Preparation of the calibration solutions . 4
7.4 Calibration . 4
7.5 Measurement of test sample . 4
8 Calculation and expression of results . 5
8.1 Calculation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.