ISO/TS 21176:2020
(Main)Cooperative intelligent transport systems (C-ITS) — Position, velocity and time functionality in the ITS station
Cooperative intelligent transport systems (C-ITS) — Position, velocity and time functionality in the ITS station
This document specifies a generic position, velocity and time (PVT) service. It further specifies the PVT service within the ITS station (ITS-S) facilities layer (ISO 21217) and its interface to other functionalities in an ITS-S such as: — ITS-S application processes (ITS-S-APs), defined in ISO 21217; — the generic facilities service handler (FSH) functionality of the ITS station facilities layer, defined in ISO/TS 17429. This document specifies: — a PVT service which, dependent on a specific implementation, uses a variety of positioning-related sources such as global navigation satellite systems (GNSSs, e.g. GALILEO, GLONASS and GPS), roadside infrastructure, cellular infrastructure, kinematic state sensors, vision sensors; — a PVT service which merges data from the above-mentioned positioning-related sources and provides the PVT output parameters (carrying the PVT information) including the associated quality (e.g. accuracy); — how the PVT service is integrated as an ITS-S capability of the ITS station facilities layer; — the interface function calls and responses (Service Access Point ? service primitives) between the PVT ITS-S capability and other functionalities of the ITS station architecture; — optionally, the PVT service as a capability of the ITS-S facilities layer; see ISO 24102-6; — an ASN.1 module C-itsPvt, providing ASN.1 type and value definitions (in Annex A); — an implementation conformance statement proforma (in Annex B), as a basis for assessment of conformity to this document. NOTE It is outside the scope of this document to define the associated conformance evaluation test procedures.
Systèmes de transport intelligents coopératifs (C-ITS) – Fonctionnalité de position, de vitesse et de temps dans la Station ITS
General Information
Buy Standard
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 21176
First edition
2020-09
Cooperative intelligent transport
systems (C-ITS) — Position, velocity
and time functionality in the ITS station
Systèmes de transport intelligents coopératifs (STI-C) –
Fonctionnalités de position, de vitesse et de temps dans la station STI
Reference number
ISO/TS 21176:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 21176:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 21176:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Conformance . 5
6 PVT service in the ITS station and communication architecture. 5
6.1 ITS station and communication architecture . 5
6.2 ITS-S application processes (ITS-S-APs) . 6
6.3 ITS-S facilities layer services . 6
6.4 PVT service provided by the ITS-S facilities layer . 8
6.5 Access to the PVT service. 8
6.6 PVT-augmented ADUs . 9
7 PVT service . 9
7.1 PVT service reference model . 9
7.2 PVT-related input parameters .10
7.3 PVT output parameters .11
7.3.1 General.11
7.3.2 PvtInfoEcdd .
...
TECHNICAL ISO/TS
SPECIFICATION 21176
First edition
Cooperative intelligent transport
systems (C-ITS) — Position, velocity
and time functionality in the ITS station
Systèmes de transport intelligents coopératifs (STI-C) –
Fonctionnalités de position, de vitesse et de temps dans la station STI
PROOF/ÉPREUVE
Reference number
ISO/TS 21176:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 21176:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 21176:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Conformance . 5
6 PVT service in the ITS station and communication architecture. 5
6.1 ITS station and communication architecture . 5
6.2 ITS-S application processes (ITS-S-APs) . 6
6.3 ITS-S facilities layer services . 7
6.4 PVT service provided by the ITS-S facilities layer . 8
6.5 Access to the PVT service. 8
6.6 PVT-augmented ADUs . 9
7 PVT service . 9
7.1 PVT service reference model . 9
7.2 PVT-related input parameters .10
7.3 PVT output parameters .11
7.3.1 General.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.