Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications

The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specifications for wireless connectivity for fixed, portable, and moving stations (STAs) within a local area.

Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY)

General Information

Status
Withdrawn
Publication Date
08-May-2018
Current Stage
9599 - Withdrawal of International Standard
Completion Date
27-Jul-2022
Ref Project

Relations

Buy Standard

Standard
ISO/IEC/IEEE 8802-11:2018 - Telecommunications and exchange between information technology systems -- Requirements for local and metropolitan area networks
English language
3532 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-11
Second edition
2018-05
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Specific requirements —
Part 11:
Wireless LAN medium access control
(MAC) and physical layer (PHY)
specifications
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC)
et de la couche physique (PHY)
Reference number
ISO/IEC/IEEE 8802-11:2018(E)
©
 IEEE 2016

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2016
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO or IEEE at
the respective address below or ISO’s member body in the country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
CP 401 • Ch. de Blandonnet 8 3 Park Avenue, New York
CH-1214 Vernier, Geneva NY 10016-5997, USA
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org Email: stds.ipr@ieee.org
Website: www.iso.org Website: www.ieee.org
Published in Switzerland
© IEEE 2016 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international organizations, governmental and non‐
governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO
and IEC have established a joint technical committee, ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted.
IEEE Standards documents are developed within the IEEE Societies and the Standards
Coordinating Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE
develops its standards through a consensus development process, approved by the American National
Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve
the final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on the ISO
list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/
iso/foreword.html.
ISO/IEC/IEEE 8802‐11 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std 802.11‐
2016) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE,
by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6,
Telecommunications and information exchange between systems.
This second edition cancels and replaces the first edition (ISO/IEC/IEEE 8802‐11:2012), which has been
technically revised.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO website.
© IEEE 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 802.11™-2016
(Revision of
IEEE Std 802.11-2012)
IEEE Standard for Information technology—
Telecommunications and information exchange between systems
Local and metropolitan area networks—
Specific requirements
Part 11: Wireless LAN Medium Access Control
(MAC) and Physical Layer (PHY) Specifications
Prepared by the 802.11 Working Group of the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 7 December 2016
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Abstract: Technical corrections and clarifications to IEEE Std 802.11 for wireless local area
networks (WLANs) as well as enhancements to the existing medium access control (MAC) and
physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2012
and 2013 have also been incorporated into this revision.
Keywords: 2.4 GHz, 256-QAM, 3650 MHz, 4.9 GHz, 5 GHz, 5.9 GHz, 60 GHz, advanced
encryption standard, AES, audio, beamforming, carrier sense multiple access/collision avoidance,
CCMP, channel switching, clustering, contention based access period, Counter mode with Cipher-
block chaining Message authentication code Protocol, confidentiality, CSMA/CA, DFS, direct link,
directional multi-gigabit, dynamic allocation of service period, dynamic extension of service period,
dynamic frequency selection, dynamic truncation of service period, E911, EDCA, emergency alert
system, emergency services, fast session transfer, forwarding, GCMP, generic advertisement
service, high throughput, IEEE 802.11™, international roaming, interworking, interworking with
external networks, LAN, local area network, MAC, management, measurement, medium access
control, media-independent handover, medium access controller, mesh, MIH, millimeter-wave,
MIMO, MIMO-OFDM, multi-band operation, multi-hop, multi-user MIMO, multiple input multiple
output, network advertisement, network discovery, network management, network selection,
noncontiguous frequency segments, OCB, path-selection, personal basic service set, PHY,
physical layer, power saving, QoS, quality of service, quality-of-service management frame, radio,
radio frequency, RF, radio resource, radio management, relay operation, spatial sharing, SSPN,
subscriber service provider, television white spaces, TPC, transmit power control, video, wireless
access in vehicular environments, wireless LAN, wireless local area network, WLAN, wireless
network management, zero-knowledge proof
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2016 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 14 December 2016. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
Print: ISBN 978-1-5044-3646-5 STD22369
PDF: ISBN 978-1-5044-3645-8 STDPD22369
IEEE Prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
2
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices
and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at
http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Docu-
ments
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed
within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”)
Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by
the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints
and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and
industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the
Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to
promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against
interference with or from other devices or networks. Implementers and users of IEEE Standards documents are
responsible for determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the
standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-
infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims
any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and
“WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE
standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change
brought about through developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent
professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE
standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
3
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered
to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an
individual presenting information on IEEE standards shall make it clear that his or her views should be considered the
personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership
affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that
any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE
and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to
comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE
does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is
welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions
of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of
the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the
publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents
may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made
available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by
reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering
practices and methods. By making these documents available for use and adoption by public authorities and private
users, IEEE does not waive any rights in copyright to the documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions
of any individual standard for company or organizational internal use or individual, non-commercial use only. To
arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood
Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for
educational classroom use can also be obtained through the Copyright Clearance Center.
4
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the
issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or
errata. An official IEEE document at any point in time consists of the current edition of the document together with any
amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has
not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not
wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of
any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended through the
issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://ieeexplore.ieee.org or contact IEEE
at the address listed previously. For more information about the IEEE SA or IEEE’s standards development process,
visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter covered by
patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of
any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an
Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http://standards.ieee.org/about/
sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant
licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that
are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for
identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity
or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with
submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users
of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement
of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards
Association.
5
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Participants
At the time this revision was sent to sponsor ballot, the IEEE 802.11 Working Group (WG) had the
following officers:
Adrian P. Stephens, Chair
st
Jon W. Rosdahl, 1 Vice Chair
nd
Dorothy V. Stanley, 2 Vice Chair
Stephen McCann, Secretary
The officers of the WG Task Group mc and the members of the WG ballot group for this revision are as
follows:
Dorothy V. Stanley, Chair
Mark A. Hamilton, Vice Chair
Jon W. Rosdahl, Secretary
Adrian P. Stephens, Technical Editor
Osama S. Aboulmagd Rojan Chitrakar Hiroshi Harada
Jinsoo Choi
Santosh P. Abraham Daniel N. Harkins
Sangsung Choi Brian D. Hart
Roberto Aiello
Li Chia Chia Choo Ahmadreza Hedayat
Thomas Alexander
Peiman Amini Sayantan Choudhury Robert F. Heile
Jerome Henry
Sirikiat Lek Ariyavisitakul Liwen Chu
Chin Keong Ho
Lee R. Armstrong Jinyoung Chun
Anh Tuan Hoang
Yusuke Asai John Coffey
Dien Hoang
Alex Ashley Kenneth Coop
Wei Hong
Kwok Shum Au Carlos Cordeiro
Ying-Chuan Hsiao
Vijay Auluck Neiyer Correal
Jing-Rong Hsieh
Subir Das
Stefan Aust
David Hunter
Hendricus De Ruijter
David Bagby
Yasuhiko Inoue
Eugene Baik Rolf J. de Vegt
Mitsuru Iwaoka
Gabor Bajko Yohannes Demessie
Wuncheol Jeong
Raja Banerjea Michael Denson
Yangseok Jeong
Phillip Barber Ting Dong
Sunggeun Jin
Anuj Batra Xiandong Dong
ZhongYi Jin
Tuncer Baykas Klaus Doppler
Nihar Jindal
Alan Berkema Roger P. Durand
V. K. Jones
Nehru Bhandaru Donald E. Eastlake
Jari Junell
Peter Ecclesine
Philippe Boucachard
Padam Kafle
Richard Edgar
Andre Bourdoux
Carl W. Kain
John Buffington Amal Ekbal
Hyunduk Kang
Lin Cai Marc Emmelmann
Mika Kasslin
George Calcev Vinko Erceg
Richard H. Kennedy
Chris Calvert Ping Fang
Stuart J. Kerry
Radhakrishna Canchi Yonggang Fang
Eunkyung Kim
Laurent Cariou Qin Fei
Jeongki Kim
William Carney Stanislav Filin
Jinho Kim
Jaesun Cha Norman Finn
Joo Young Kim
Matthew J. Fischer
Romana Challans
Joonsuk Kim
Kim Chang George Flammer
Suhwook Kim
Kuor-Hsin Chang Chittabrata Ghosh
Taejoon Kim
Xin Chang James P. K. Gilb
Youhan Kim
Clint F. Chaplin Reinhard Gloger
Youngsoo Kim
Bin Chen Daning Gong
Shoichi Kitazawa
Jiamin Chen David Goodall
Jarkko Kneckt
Jixin Chen Elad Gottlib
Gwangzeen Ko
Lidong Chen Sudheer A. Grandhi
Fumihide Kojima
Stephen Grau
Qian Chen
Tom Kolze
Xi Chen Michael Grigat
Timo Koskela
Minho Cheong David Halasz
Bruce P. Kraemer
George Cherian Christopher J. Hansen
Jin-Sam Kwak
Francois Chin Peng Hao
Joseph Kwak
6
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Hyoungjin Kwon Sandhya Patil Tong Tian
Young Hoon Kwon Xiaoming Peng Jens Tingleff
Eldad Perahia Fei Tong
Paul Lambert
James E. Petranovich Ha Nguyen Tran
Zhou Lan
Leonardo Lanante Albert Petrick Kazuyoshi Tsukada
John Petro
James Lansford Masahiro Umehira
Xu Ping Richard D. J. Van Nee
Jean-Pierre Le Rouzic
Anseok Lee Juho Pirskanen Allert Van Zelst
Donghun Lee Khiam Boon Png Prabodh Varshney
Vishakan Ponnampalam
Jae Seung Lee Sameer Vermani
Ron Porat Dalton T. Victor
Wookbong Lee
Zhongding Lei Henry S. Ptasinski Gabriel Villardi
Wai Kong Leung Rethnakaran Pulikkoonattu George A. Vlantis
Chang-Woo Chang Pyo
Joseph Levy Chao Chun Wang
Emily H. Qi Haiguang Wang
Feng Li
Huan-Bang Li Huyu Qu Haiming Wang
Liang Li Harish Ramamurthy James June Wang
Jayaram Ramasastry Lei Wang
Lingjie Li
Ivan Reede Lin Wang
Yunbo Li
Yunzhou Li Edward Reuss Qi Wang
Zhiqiang Li Maximilian Riegel Xiang Wang
Mark Rison Xuehuan Wang
Erik Lindskog
Jianhan Liu Zhigang Rong Lisa Ward
Pei Liu Cheol Ryu Zou Wei-Xia
Kiseon Ryu
Yong Liu Lei Wen
Kazuyuki Sakoda Menzo M. Wentink
Zongru Liu
Peter Loc Ruben E. Salazar Cardozo Harya Wicaksana
Su Lu Hemanth Sampath Eric Wong
Sigurd Schelstraete Harry R. Worstell
Long Luo
Jean Schwoerer Tianyu Wu
Yi Luo
Zhendong Luo Jonathan Segev Zhanji Wu
Kaiying Lv Cristina Seibert Zhenyu Xiao
Yongho Seok Dongmei Xu
Michael Lynch
Jouni K. Malinen Kunal Shah Quanping Xu
Hiroshi Mano Huairong Shao Guang-Qi Yang
Simone Merlin Zhenhai Shao Lin Yang
Stephen J. Shellhammer Xun Yang
James Miller
Keiichi Mizutani Ian Sherlock Yunsong Yang
Apurva Mody Wei Shi Fan Ye
Michael Montemurro Nobuhiko Shibagaki James Yee
Shusaku Shimada Peter Yee
Kenichi Mori
Hitoshi Morioka Chang Sub Shin Wai-Leong Yeow
Ronald Murias Thomas M. Siep Kaoru Yokoo
Michael Sim Su Khiong Khiong Yong
Andrew Myles
Yukimasa Nagai Dwight Smith Christopher Young
Yuhei Nagao Graham Kenneth Smith Heejung Yu
Hiroki Nakano Myung Sun Song Zhan Yu
Sudhir Srinivasa Tevfik Yucek
Chiu Ngo
Paul Nikolich Robert Stacey Guangrong Yue
Hiroyo Ogawa Lawrence Stefani Katsuo D. A. Yunoki
Minseok Oh Rene Struik Hongyuan Zhang
Jung Hoon Suh Hui Zhang
Min-Seok Oh
David Olson Chin-Sean Sum Junjian Zhang
Satoshi Oyama Bo Sun Nianzu Zhang
Xin Zhang
Michael J. Paljug Chen Sun
Santos Ghanshyam Pandey Sheng Sun Mu Zhao
Anna Pantelidou Kazuaki Takahashi Jun Zheng
Giwon Park Mineo Takai Shoukang Zheng
Mingtuo Zhou
Minyoung Park Sagar Tamhane
Seung-Hoon Park Joseph Teo Yan Zhuang
Jaya Shankar Pathmasuntharam Thomas Tetzlaff Lan Zhuo
Jerry Thrasher
7
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Major contributions were received from the following individuals:
Carlos Aldana Mitsuru Iwaoka Kazuyuki Sakoda
Yaron Alpert Assaf Kasher Amichai Sanderovich
Edward Au Peter Khoury Sigurd Schelstraete
Gabor Bajko Youhan Kim Yongho Seok
Sean Coffey Wookbong Lee Graham Kenneth Smith
Erik Lindskog
Daniel Cohn Dorothy V. Stanley
Carlos Cordeiro Jouni K. Malinen Adrian P. Stephens
Peter Ecclesine Stephen McCann Bo Sun
Vinko Erceg Michael Montemurro Fei Tong
Matthew J. Fischer Hiroyuki Motozuka Payam Torab
Michael Fischer Andrew Myles Solomon Trainin
Mark A. Hamilton Eldad Perahia Ganesh Venkatesan
Daniel N. Harkins Emily H. Qi Qi Wang
Brian D. Hart Mark Rison Gaius Wee
Guido R. Hiertz Jon W. Rosdahl Menzo M. Wentink
Wei Hong Dick Roy Mingguang Xu
Chen Yanming
David Hunter
The following members of the individual balloting committee voted on this revision. Balloters may have
voted for approval, disapproval, or abstention.
Osama S. Aboulmagd David Evans Assaf Kasher
Tomoko Adachi Zhong Fan Ruediger Kays
Iwan Adhicandra Liu Fangfang Stuart J. Kerry
Yongbum Kim
Thomas Alexander Matthew J. Fischer
Youhan Kim
Richard Alfvin Michael Fischer
Patrick Kinney
Nobumitsu Amachi Avraham Freedman
Bruce P. Kraemer
Carol Ansley Dan Gal
Yasushi Kudoh
Butch Anton Devon Gayle
Thomas Kurihara
Yusuke Asai James P. K. Gilb
Paul Lambert
Alfred Asterjadhi Tim Godfrey
Jeremy Landt
Joel Goergen
Stefan Aust
Mark Laubach
Randall Groves
Michael Bahr
Hyeong Ho Lee
Robert Grow
Gabor Bajko
Wookbong Lee
Michael Gundlach
Phillip Barber
James Lepp
Tuncer Baykas Chris Guy
Joseph Levy
Mathilde Benveniste Gloria Gwynne
Arthur H. Light
Harry Bims Rainer Hach
William Lumpkins
Gennaro Boggia Russell Haines
Chris Lyttle
Nancy Bravin Mark A. Hamilton
Elvis Maculuba
Theodore Brillhart Christopher J. Hansen
Jouni K. Malinen
John Buffington Jerome Henry
James Marin
William Byrd Marco Hernandez
Roger Marks
Brent Cain Guido Hiertz
Jeffery Masters
Radhakrishna Canchi Ronald Hochnadel
Stephen McCann
Fengming Cao Werner Hoelzl
Michael McInnis
William Carney David Hunter
Filip Mestanov
Juan Carreon Tetsushi Ikegami
Apurva Mody
Minho Cheong Noriyuki Ikeuchi
Jose Morales
Yasuhiko Inoue
Keith Chow
Ronald Murias
Sergiu Iordanescu
Jinyoung Chun
Rick Murphy
Akio Iso
Charles Cook
Andrew Myles
Todor Cooklev Atsushi Ito
Juichi Nakada
Carlos Cordeiro Raj Jain
Nabil Nasser
Steven Crowley Michael Johas Teener
Michael Newman
Yezid Donoso Adri Jovin
Chiu Ngo
Sourav Dutta Joe Natharoj Juisai
Nicks Nikjoo
Donald E. Eastlake Naveen Kakani
Paul Nikolich
Peter Ecclesine Shinkyo Kaku
Satoshi Obara
Richard Edgar Hyunjeong Kang
Robert O’Hara
Marc Emmelmann Piotr Karocki
Yoshihiro Ohba
8
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Satoshi Oyama Andy Scott Keat Beng Toh
Stephen Palm Yongho Seok Payam Torab
Solomon Trainin
Glenn Parsons Kunal Shah
Ha Nguyen Tran
Arumugam Paventhan Ian Sherlock
Kazuyoshi Tsukada
Shusaku Shimada
Brian Phelps
Mark-Rene Uchida
Walter Pienciak Robert Slater
Lorenzo Vangelista
Subburajan Ponnuswamy Di Dieter Smely
Allert Van Zelst
Clinton Powell Graham Kenneth Smith
Dmitri Varsanofiev
Venkatesha Prasad Daniel Smolinski
Prabodh Varshney
Emily H. Qi Kapil Sood
Ganesh Venkatesan
R. K. Rannow Robert Stacey
George A. Vlantis
Dorothy V. Stanley
Maximilian Riegel
Khurram Waheed
Mark Rison Thomas Starai
Haiming Wang
Robert Robinson Adrian P. Stephens
Lei Wang
Benjamin Rolfe Rene Struik
Stephen Webb
Jon W. Rosdahl Walter Struppler
Hung-Yu Wei
Kazuyuki Sakoda Mark Sturza
Menzo M. Wentink
Osman Sakr Rakesh Taori
Chun Yu Charles Wong
Amichai Sanderovich David Tepen
Forrest Wright
John Santhoff Patricia Thaler
James Yee
Naotaka Sato David Thompson
Oren Yuen
Bartien Sayogo Edward Tiedemann
Daidi Zhong
Sigurd Schelstraete Jens Tingleff
Zhen Zhou
When the IEEE-SA Standards Board approved this revision on 7 December 2016, it had the following
membership:
Jean-Philippe Faure, Chair
Ted Burse, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Chuck Adams
Ronald W. Hotchkiss Mehmet Ulema
Masayuki Ariyoshi Michael Janezic Yingli Wen
Stephen Dukes Joseph L. Koepfinger* Howard Wolfman
Don Wright
Jianbin Fan Hung Ling
Yu Yuan
J. Travis Griffith Kevin Lu
Daidi Zhong
Gary Hoffman Annette D. Reilly
Gary Robinson
*Member Emeritus
9
Copyright © 2016 IEEE. All rights reserved.
© IEEE 2016 – All rights reserved

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-11:2018(E)
Introduction
This introduction is not part of IEEE Std 802.11-2016, IEEE Standard for Information technology—
Telecommunications and information exchange between systems—Local and metropolitan area network—Specific
requirements—Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications.
This revision gives users, in one document, the IEEE 802.11 standard for wire
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.