ISO 12311:2023

Personal protective equipment — Test methods for sunglasses and related eyewear

This document specifies reference's test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear. Other test methods can be used if proven to be equivalent.

Équipement de protection individuelle — Méthodes d'essai pour lunettes de soleil et articles de lunetterie associés

Le présent document spécifie les méthodes d’essai de référence permettant de déterminer les propriétés des lunettes de soleil indiquées dans l’ISO 12312 (toutes les parties). Il s’applique à toutes les lunettes de soleil et aux articles de lunetterie associés. D’autres méthodes d’essai peuvent être utilisées s’il est démontré qu’elles sont équivalentes.

General Information

• Status: Published
• Publication Date: 10-Dec-2023
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: ISO/TC 94/SC 6 - Eye and face protection
• Drafting Committee: ISO/TC 94/SC 6/WG 2 - Test methods
• Current Stage: 6060 - International Standard published
• Start Date: 11-Dec-2023
• Due Date: 11-Sep-2022
• Completion Date: 11-Dec-2023

Relations

• Consolidates: ISO 10145-1:2016 - End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
• Effective Date: 06-Jun-2022
• Revises: ISO 12311:2013 - Personal protective equipment — Test methods for sunglasses and related eyewear
• Effective Date: 23-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12311
Second edition
2023-12
Personal protective equipment — Test
methods for sunglasses and related
eyewear
Équipement de protection individuelle — Méthodes d'essai pour
lunettes de soleil et articles de lunetterie associés
Reference number
ISO 12311:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12311:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12311:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Prerequisites . 1
5 General test requirements . 2
6 Test methods for mechanical properties . 2
6.1 Test method for frame deformation and filter retention . 2
6.1.1 Principle . 2
6.1.2 Apparatus . 2
6.1.3 Procedure . 3
6.1.4 Report. 4
6.1.5 Uncertainty of measurement . 4
6.2 Test method for increased endurance of sunglasses . 5
6.2.1 Principle . 5
6.2.2 Apparatus . 5
6.2.3 Procedure . 5
6.2.4 Report. 10
6.2.5 Uncertainty of measurement . 10
6.3 Test for resistance to perspiration of the sunglass frame .
...

NORME ISO
INTERNATIONALE 12311
Deuxième édition
2023-12
Équipement de protection
individuelle — Méthodes d'essai
pour lunettes de soleil et articles de
lunetterie associés
Personal protective equipment — Test methods for sunglasses and
related eyewear
Numéro de référence
ISO 12311:2023(F)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12311:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii
  © ISO 2023 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 12311:2023(F)
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives .1
3 Termes et définitions . 1
4 Conditions préalables . 1
5 Exigences générales d’essai . 2
6 Méthodes d’essai relatives aux propriétés mécaniques . 2
6.1 Méthode d’essai relative à la déformation de la monture et au maintien des filtres . 2
6.1.1 Principe. 2
6.1.2 Appareillage. 2
6.1.3 Mode opératoire . . 3
6.1.4 Rapport . 4
6.1.5 Incertitude de mesure . 4
6.2 Méthode d’essai relative à l’endurance améliorée des lunettes de soleil . 5
6.2.1 Principe. 5
6.2.2 Appareillage. 5
6.2.3 Mode opératoire . 5
6.2.4 Rapport . 10
6.2.5 Incertitude de mesure . 10
6.3 Essai de résistance à la transpiration de la monture des lunettes de soleil . 10
6.3.1 Principe.
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12311
ISO/TC 94/SC 6
Personal protective equipment — Test
Secretariat: BSI
methods for sunglasses and related
Voting begins on:
2023-09-14 eyewear
Voting terminates on:
Équipement de protection individuelle — Méthodes d'essai pour
2023-11-09
lunettes de soleil et articles de lunetterie associés
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12311:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 12311:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12311
ISO/TC 94/SC 6
Personal protective equipment — Test
Secretariat: BSI
methods for sunglasses and related
Voting begins on:
eyewear
Voting terminates on:
Équipement de protection individuelle — Méthodes d'essai pour
lunettes de soleil et articles de lunetterie associés
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 12311:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 12311:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Prerequisites . 1
5 General test requirements . 2
6 Test methods for mechanical properties . 2
6.1 Test method for frame deformation and filter retention . 2
6.1.1 Principle . 2
6.1.2 Apparatus . 2
6.1.3 Procedure . 3
6.1.4 Report.
...

Style Definition: Heading 1: Indent: Left: 0 pt, First
ISO/FDIS 12311:2023(E)
line: 0 pt, Tab stops: Not at 21.6 pt
ISO/TC 94/SC 6/WG 2 Style Definition: Heading 2: Font: Bold, Tab stops: Not
at 18 pt
Secretariat: BSI Style Definition: Heading 3: Font: Bold
Style Definition: Heading 4: Font: Bold
Date: 2023-07-27xx
Style Definition: Heading 5: Font: Bold
Style Definition: Heading 6: Font: Bold
Personal protective equipment — Test methods for sunglasses and related
Style Definition: ANNEX
eyewear
Style Definition: TOC Heading
Équipement de protection individuelle — Méthodes d'essai pour lunettes de soleil et
Style Definition: AMEND Terms Heading: Font: Bold
articles de lunetterie associés
Style Definition: AMEND Heading 1 Unnumbered:
Font: Bold

---------------------- Page: 1 ----------------------
ISO/FDIS 12311:2023(E)
© ISO 2023
Formatted: Pattern: Clear
Formatted: Pattern: Clear
All rights reserved. Unless otherwise specified, or required in the context of its implementation,
no part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet,
without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 12311:2023(E)
Contents
Foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Prerequisites. 5
5 General test requirements . 6
6 Test methods for mechanical properties . 6
6.1 Test method for frame deformation and filter retention . 6
6.1.1 Principle . 6
6.1.2 Apparatus . 6
6.1.3 Procedure . 7
6.1.4 Verification and test report . 8
6.1.5 Uncertainty of measurement . 9
6.2 Test method for increased endurance of sunglasses . 9
6.2.1 Principle . 9
6.2.2 Apparatus . 9
6.2.3 Procedure . 9
6.2.4 Verification and test report . 14
6.2.5 Uncertainty of measurement . 14
6.3 Test for resistance to perspiration of the sunglass frame . 14
6.3.1 Principle . 14
6.3.2 Apparatu
...