ISO 6182-11:2019

Fire protection — Automatic sprinkler systems — Part 11: Requirements and test methods for pipe hangers

This document specifies construction requirements, performance requirements, test methods and marking requirements for typical types of pipe hangers.

Protection contre l'incendie — Systèmes d'extinction automatiques du type sprinkler — Partie 11: Exigences et méthodes d'essai relatives aux dispositifs de fixation des conduites

General Information

• Status: Published
• Publication Date: 28-May-2019
• ICS: 13.220.20 - Fire protection
• Technical Committee: ISO/TC 21/SC 5 - Fixed firefighting systems using water
• Drafting Committee: ISO/TC 21/SC 5/WG 11 - Pipes and fittings
• Current Stage: 9020 - International Standard under periodical review
• Start Date: 15-Apr-2024
• Completion Date: 15-Apr-2024

Relations

• Revises: ISO 6182-11:2003 - Fire protection — Automatic sprinkler systems — Part 11: Requirements and test methods for pipe hangers
• Effective Date: 04-Nov-2015

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6182-11
Second edition
2019-05
Fire protection — Automatic sprinkler
systems —
Part 11:
Requirements and test methods for
pipe hangers
Protection contre l'incendie — Systèmes d'extinction automatiques du
type sprinkler —
Partie 11: Exigences et méthodes d'essai relatives aux dispositifs de
fixation des conduites
Reference number
ISO 6182-11:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 6182-11:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6182-11:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Product consistency . 4
5 Materials and rod sizes . 4
5.1 Materials . 4
5.2 Rod sizes . 4
5.3 Ceiling flanges . 5
6 Material thickness. 5
6.1 Uncoated material thickness. 5
6.2 Coated material thickness . 5
7 Performance requirements . 6
7.1 General . 6
7.2 Elongation and pull requirements . 6
7.3 Concrete inserts . 7
7.4 Vibration requirements . 7
8 Test methods .
...