ISO 14404-1:2013

Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace

ISO 14404-1:2013 specifies calculation methods for the carbon dioxide (CO2) intensity of plant where steel is produced through a blast furnace. It includes boundary definition, material and energy flow definition and emission factor of CO2. Besides direct source import to the boundary, upstream and credit concept is applied to exhibit the plant CO2 intensity. ISO 14404-1:2013 supports the steel producer to establish CO2 emissions attributable to a site. ISO 14404-1:2013 cannot be used to calculate benchmarks or to compare CO2 intensities of production processes that are operated inside the site.

Méthode de calcul de l'intensité de l'émission de dioxyde de carbone de la production de la fonte et de l'acier — Partie 1: Usine sidérurgique avec haut fourneau

General Information

• Status: Published
• Publication Date: 14-Mar-2013
• ICS: 13.020.40 - Pollution, pollution control and conservation
• ICS: 77.080.01 - Ferrous metals in general
• Technical Committee: ISO/TC 17 - Steel
• Drafting Committee: ISO/TC 17 - Steel
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 26-Oct-2023

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14404-1
First edition
2013-03-15
Calculation method of carbon dioxide
emission intensity from iron and
steel production —
Part 1:
Steel plant with blast furnace
Méthode de calcul de l’intensité de l’émission de dioxyde de carbone
de la production de la fonte et de l’acier —
Partie 1: Usine sidérurgique avec fourneau
Reference number
ISO 14404-1:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 14404-1:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14404-1:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms and definitions . 1
2.1 Emissions . 1
2.2 Gas fuel . 2
2.3 Liquid fuel . 2
2.4 Solid fuel . 2
2.5 Auxiliary material . 3
2.6 Energy carriers . 4
2.7 Ferrous containing materials . 4
2.8 Alloys . 4
2.9 Product and by-product . 4
2.10 Others . 5
3 Symbols . 6
4 Principles . 7
4.1 General . 7
4.2 Relevance .
...