Jewellery — Ring-sizes — Definition, measurement and designation

ISO 8653:2016 specifies a method to measure the ring-size using a ring stick with defined characteristics, which is mainly used during manufacturing steps, and specifies the designation of the ring-size. NOTE For jeweller-consumer relationships, the finger size is measured with a finger gauge set made up of a ring for each size with the same diameter and tolerance than the ring stick ones.

Bijouterie, joaillerie — Taille de bagues — Définition, mesurage et désignation

ISO 8653:2016 spécifie une méthode de mesure de la taille des bagues à l'aide d'un triboulet de caractéristiques définies, qui est principalement utilisé pendant les étapes de fabrication, ainsi que la désignation des tailles de bagues. NOTE Lors de la relation bijoutier-consommateur, la taille du doigt est mesurée avec un baguier constitué d'une bague pour chaque taille ayant les mêmes diamètre et tolérances que ceux du triboulet.

General Information

Status
Published
Publication Date
14-Jan-2016
Current Stage
9093 - International Standard confirmed
Completion Date
27-Aug-2021
Ref Project

Relations

Buy Standard

Standard
ISO 8653:2016 - Jewellery -- Ring-sizes -- Definition, measurement and designation
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8653:2016 - Bijouterie, joaillerie -- Taille de bagues -- Définition, mesurage et désignation
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8653
Second edition
2016-01-15
Jewellery — Ring-sizes — Definition,
measurement and designation
Bijouterie, joaillerie — Taille de bagues — Définition, mesurage et
désignation
Reference number
ISO 8653:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 8653:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8653:2016(E)

Contents  Page
Foreword .iv
Introduction .v
1  Scope . 1
2  Terms and definitions . 1
3  Apparatus . 1
4  Ring-size measurement . 2
4.1 Method . 2
4.2 Ring inside profile . 2
4.3 Particular shapes of rings . 2
4.3.1 General. 2
4.3.2 Ring with mounting, signet-ring . 2
4.3.3 Ring with several interlaced circles . 3
4.3.4 Square ring . 3
5  Designation . 4
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8653:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the foll
...

NORME ISO
INTERNATIONALE 8653
Deuxième édition
2016-01-15
Bijouterie, joaillerie — Taille de bagues
— Définition, mesurage et désignation
Jewellery — Ring-sizes — Definition, measurement and designation
Numéro de référence
ISO 8653:2016(F)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 8653:2016(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2016, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8653:2016(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Termes et définitions . 1
3 Appareillage . 1
4 Mesurage de la taille de bague . 2
4.1 Méthode . 2
4.2 Profils intérieurs de bagues . 2
4.3 Cas particuliers de bagues . 2
4.3.1 Généralités . 2
4.3.2 Bague avec insert, chevalière . 2
4.3.3 Bagues entrelacées . . . 3
4.3.4 Bague carrée . 3
5 Désignation . 4
© ISO 2016 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 8653:2016(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer
un engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’é
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.