iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 12219-9:2019

(Main)

Interior air of road vehicles — Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts — Large bag method

Interior air of road vehicles — Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts — Large bag method

This document specifies a large bag sampling method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which are emitted from vehicle interior parts into the air inside road vehicles. This method is intended for evaluation of large new vehicle interior parts, and complete assemblies. This is a screening method to compare similar car components under similar test conditions on a routine basis. Evaluating VOC emissions of vehicle interior parts is an important aspect of the vehicle indoor air quality. This document is complementary to existing standards and provides test laboratories and the manufacturing industry with a cost-effective evaluation of vehicle interior parts. This method is only applicable to newly manufactured vehicle parts. This method is applicable to all types of vehicles, and vehicle products which are used as parts in the interior of vehicles.

Air intérieur des véhicules routiers — Partie 9: Détermination des émissions de composés organiques volatils des parties et matériaux intérieurs des véhicules — Méthode du grand sac

Notranji zrak v cestnih vozilih - 9. del: Določevanje emisij hlapnih organskih spojin iz notranjih delov vozila - Metoda vzorčenja s plinskimi vrečami

Ta dokument določa metodo vzorčenja s plinskimi vrečami za merjenje hlapnih organskih spojin (VOC), formaldehida in drugih karbonilnih spojin, ki se lahko iz notranjih delov vozila izločijo v zrak v cestnih vozilih. Metoda je namenjena ocenjevanju večjih notranjih delov novega vozila in celotnih sklopov. To je presejalna metoda za rutinsko primerjavo podobnih sestavnih delov vozila v podobnih preskusnih pogojih. Ocenjevanje emisij hlapnih organskih spojin iz notranjih delov vozila je pomemben vidik kakovosti zraka v vozilih. Ta dokument dopolnjuje obstoječe standarde in preskusnim laboratorijem ter predelovalni industriji zagotavlja stroškovno učinkovito ocenjevanje notranjih delov vozil. Metoda je uporabna samo za novo izdelane sestavne dele vozil. Uporabna je za vse vrste vozil in avtomobilske izdelke, ki se uporabljajo kot sestavni deli v notranjosti vozil.

General Information

Status
Published
Publication Date
24-Apr-2019
ICS
13.040.20 - Ambient atmospheres
43.020 - Road vehicles in general
Technical Committee
ISO/TC 146/SC 6 - Indoor air
Drafting Committee
ISO/TC 146/SC 6 - Indoor air
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project
SIST ISO 12219-9:2019 - Interior air of road vehicles - Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts - Large bag method

Relations

Consolidated By
ISO 11102-1:2020 - Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests
Effective Date
06-Jun-2022

Buy Standard

ISO 12219-9:2019ISO 12219-9:2019
PreviousNext
Standard
ISO 12219-9:2019
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
ISO 12219-9:2019 - Interior air of road vehiclesISO 12219-9:2019 - Interior air of road vehicles
PreviousNext
Standard
ISO 12219-9:2019 - Interior air of road vehicles
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 12219-9:2019
01-december-2019
Notranji zrak v cestnih vozilih - 9. del: Določevanje emisij hlapnih organskih spojin
iz notranjih delov vozila - Metoda vzorčenja s plinskimi vrečami
Interior air of road vehicles - Part 9: Determination of the emissions of volatile organic
compounds from vehicle interior parts - Large bag method
Air intérieur des véhicules routiers - Partie 9: Détermination des émissions de composés
organiques volatils des parties et matériaux intérieurs des véhicules - Méthode du grand
sac
Ta slovenski standard je istoveten z: ISO 12219-9:2019
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
43.020 Cestna vozila na splošno Road vehicles in general
SIST ISO 12219-9:2019 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 12219-9:2019

---------------------- Page: 2 ----------------------
SIST ISO 12219-9:2019
INTERNATIONAL ISO
STANDARD 12219-9
First edition
2019-04
Interior air of road vehicles —
Part 9:
Determination of the emissions of
volatile organic compounds from
vehicle interior parts — Large bag
method
Air intérieur des véhicules routiers —
Partie 9: Détermination des émissions de composés organiques
volatils des parties et matériaux intérieurs des véhicules — Méthode
du grand sac
Reference number
ISO 12219-9:2019(E)
©
ISO 2019

---------------------- Page: 3 ----------------------
SIST ISO 12219-9:2019
ISO 12219-9:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 12219-9:2019
ISO 12219-9:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
5.1 General . 2
5.2 Large sampling bag . 3
5.2.1 General. 3
5.2.2 Material . 3
5.2.3 Air tightness . 3
5.2.4 Bag blank concentration .
...

INTERNATIONAL ISO
STANDARD 12219-9
First edition
2019-04
Interior air of road vehicles —
Part 9:
Determination of the emissions of
volatile organic compounds from
vehicle interior parts — Large bag
method
Air intérieur des véhicules routiers —
Partie 9: Détermination des émissions de composés organiques
volatils des parties et matériaux intérieurs des véhicules — Méthode
du grand sac
Reference number
ISO 12219-9:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 12219-9:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12219-9:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
5.1 General . 2
5.2 Large sampling bag . 3
5.2.1 General. 3
5.2.2 Material . 3
5.2.3 Air tightness . 3
5.2.4 Bag blank concentration . 3
5.3 Purity of the filling gas . 3
5.4 Thermostatic oven . 3
5.5 Pumps . 4
5.6 Integrating flow meter or gas meter . 4
6 Test conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 12219-1:2021(Main)
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors
SIST ISO 12219-1:2023

This document specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of 23 °C - 25 °C with no air exchange; a second only for the measurement of formaldehyde at elevated temperatures (parking mode); and a third for VOCs and carbonyl compounds simulating driving after the vehicle has been parked in the sun starting at elevated temperatures (driving mode). For the simulation of the mean sun irradiation, a fixed irradiation in the whole vehicle test chamber is employed. The VOC method is valid for measurement of non-polar and slightly polar VOCs in a concentration range of sub-micrograms per cubic metre up to several milligrams per cubic metre. Using the principles specified in this method, some semi-volatile organic compounds (SVOC) can also be analysed. Compatible compounds are those which can be trapped and released from the Tenax TA®[1] sorbent tubes described in ISO 16000‑6, which includes VOCs ranging in volatility from n-C6 to n-C16. The sampling and analysis procedure for formaldehyde and other carbonyl compounds is performed by collecting air on to cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption. Formaldehyde and other carbonyl compounds can be determined in the approximate concentration range 1 µg/m3 to 1 mg/m3. The method is valid for passenger cars, as defined in ECE-TRANS-WP.29/1045. This document gives guidelines for: a) transport and storage of the test vehicles until the start of the test; b) conditioning for the surroundings of the test vehicle and the test vehicle itself as well as the whole vehicle test chamber; c) conditioning of the test vehicle prior to measurements; d) simulation of ambient air conditions (ambient mode); e) formaldehyde sampling at elevated temperatures (parking mode); f) simulation of driving after the test vehicle has been parked in the sun (driving mode). [1] Tenax TA® is the trade name of a product supplied by Buchem. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the product named. Equivalent products may be used if they can be shown to lead to the same results.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 15% off
ISO
ISO 12219-10:2021(Main)
Interior air of road vehicles — Part 10: Whole vehicle test chamber — Specification and methods for the determination of volatile organic compounds in cabin interiors — Trucks and buses
SIST ISO 12219-10:2021

This document describes and specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs; for more information see Annex E), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of 23 °C with no air exchange; a second only for the measurement of formaldehyde at elevated temperatures (parking mode); and a third for VOCs and carbonyl compounds simulating driving after the vehicle has been parked in the sun starting at elevated temperatures (driving mode). For the simulation of the mean sun irradiation, fixed irradiation in the whole vehicle test chamber is employed. The VOC method is valid for measurement of non-polar and slightly polar VOCs in a concentration range of sub-micrograms per cubic metre up to several milligrams per cubic metre. Using the principles described in this method, some semi-volatile organic compounds (SVOC) can also be analysed. Compatible compounds are those which can be trapped and released from the Tenax TA®1) sorbent tubes described in ISO 16000‑6, which includes VOCs ranging in volatility from n-C6 to n-C16. The sampling and analysis procedure for formaldehyde and other carbonyl compounds is performed by collecting air on to cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption. Formaldehyde and other carbonyl compounds can be determined in the approximate concentration range 1 μg/m3 to 1 mg/m3. This method applicable to trucks and buses, as defined in ISO 3833:1977 3.1.1 to 3.1.6. This document describes: a) Transport and storage of the test vehicle until the start of the test. b) Conditioning of the surroundings of the test vehicle and the test vehicle itself as well as the whole vehicle test chamber. c) Conditioning of the test vehicle prior to measurements. d) Simulation of ambient air conditions (ambient mode). e) Formaldehyde sampling at elevated temperatures (parking mode). f) Simulation of driving after the test vehicle has been parked in the sun (driving mode). 1)Tenax TA® is the trade name of a product supplied by Buchem. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the product named. Equivalent products may be used if they can be shown to lead to the same results.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 12219-8:2018(Main)
Interior air of road vehicles — Part 8: Handling and packaging of materials and components for emission testing
SIST ISO 12219-8:2019

This document specifies the selection, preparation, conditioning, packaging, labelling, transportation and storage for materials and components for, but not limited to, volatile organic compound (VOC) testing, fogging testing and odour testing. It pays special attention to materials sensitive to contamination and/or rapid volatilization of emissions in order to achieve repeatable and accurate test results.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 12219-6:2017(Main)
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method
SIST ISO 12219-6:2018

ISO 12219-6:2017 describes a qualitative and quantitative analytical method for vapour-phase organic compounds released from car trim materials under simulated real use conditions, i.e. a vehicle is parked for several hours in direct sunlight. Under these conditions, some interior parts and materials reach higher temperatures than 65 °C (ISO 12219‑4), e.g. a dashboard can reach temperatures up to 120 °C. This document can be implemented as an optional addition to ISO 12219‑4 so that VOC, volatile carbonyl and SVOC testing can all be completed within one day. This part has been added to gain insight into the emission behaviour and emission potential of selected vehicle interior parts and materials exposed to higher temperatures. (By convention, 100 °C is set as the higher temperature.) The test is performed in small emission test chambers (small chambers). These small chambers are intended to provide a transfer function for vehicle level emissions. This method is intended for evaluating new car interior trim components but can, in principle, be applied to used car components. The specified analytical procedure for SVOCs and semi-volatile carbonyls is ISO 16000‑6. ISO 12219-6:2017 is complementary to existing standards[1],[2] and provides third party test laboratories and manufacturing industry with an approach for - identifying the effect of real use conditions on specific VOC and SVOC emissions data, - comparing emissions from various assemblies with regards to specific VOC and SVOC emissions, - evaluating and sorting specific assemblies regarding specific VOC and SVOC emissions data, - providing specific VOC and SVOC emissions data to develop and verify a correlation between component level methods and in vehicle air quality and - evaluating prototype, "low-emission" assemblies during development. The method described can be exclusively performed as a high temperature test or it can be performed in combination with the determination of VOCs at 65 °C in one run, which is described in ISO 12219‑4.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
ISO
ISO 12219-7:2017(Main)
Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
SIST ISO 12219-7:2018

ISO 12219-7:2017 specifies a standardized and objective process to analyse and determine the olfactory behaviour of components, semi-finished products and materials fitted in the interior of road vehicles. The odour determination is either performed by using samples from the interior air of road vehicles or from emission test chamber air. This document describes an olfactory screening method based on different scales for the olfactory assessment which are described in the annexes. Other olfactory assessments, e.g. according to ISO 16000‑28, are also possible but are not the focus of this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 12219-5:2014(Main)
Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method
SIST ISO 12219-5:2014

ISO 12219-5:2014 specifies a chamber based, static headspace type method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior unit components into the cabin air. The chamber emission test is intended to provide characteristic emission of unit component to car interior of assembly level emission. It also specifies the emission test chamber, preparation of the test specimen, connection of the vapour sampling devices and test conditions. This method is valid for new car interior unit components intended for vehicles, and can also be used for car interior unit components disassembled from assembly of car interior trim or used cars. A set of multi-unit components could be applicable according to the test purpose. A dynamic mode operation of emission chamber could be applied if corroborative information of the unit component emission between this method and small chamber method (ISO12219-4:2013) is desired. The specified analytical procedure for VOCs (ISO 16000-6) is valid for the determination of VOCs ranging in concentration from sub-µg/m3 to several mg/m3. The method is applicable to the measurement of non-polar and slightly polar VOCs ranging in volatility from n-C6 to n-C16. Some very volatile compounds (VVOC) and semi-volatile organic compounds (SVOC) can also be analysed (see informative Annex D of ISO 16000-6:2011). ISO 12219-5:2014 is complementary to existing standards and provides third party test laboratories and manufacturing industry with an approach for: - comparing emissions from various unit components in assembly with regards to specific VOC emissions, - evaluating and sorting specific unit components regarding specific VOC emissions data, - providing specific VOC emissions data to develop and verify the correlation between a material-based method and an assembly-based method, - evaluating prototype, "low-emission" unit components during development.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    26 pages
    Russian language
    sale 15% off
ISO
ISO 12219-4:2013(Main)
Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method
SIST ISO 12219-4:2014

ISO 12219-4:2013 specifies a qualitative and quantitative analytical method for vapour-phase organic compounds (volatile and some semi-volatile) released from car trim materials under simulated real use conditions using small emission test chambers (small chamber). Small chambers are intended to provide a transfer function to vehicle level emissions. This method is intended for evaluating new car interior trim components but can, in principle, be applied to used car components. Target compounds include VOCs (conventionally defined as organic compounds in the volatility range n-hexane to n-hexadecane) and volatile carbonyl compounds such as formaldehyde. The specified analytical procedure for VOCs is ISO 16000‑6 and for formaldehyde and some other light carbonyl compounds is ISO 16000‑3. ISO 12219-4:2013 is complementary to ASTM D5116 and VDA 276, and provides third party test laboratories and manufacturing industry with an approach for: a) identifying the effect of real use conditions on specific VOC emissions data; b) comparing emissions from various assemblies with regards to specific VOC emissions; c) evaluating and sorting specific assemblies regarding specific VOC emissions data; d) providing specific VOC emissions data to develop and verify a correlation between material level methods and the vehicle level method; e) evaluating prototype, "low-emission" assemblies during development.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
ISO
ISO 12219-3:2012(Main)
Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method
SIST ISO 12219-3:2013

ISO 12219-3:2012 specifies a fast, qualitative and semiquantitative screening method for vapour-phase organic compounds (volatile and some semi-volatile) released from vehicle trim materials under simulated real-use conditions using micro-scale test chambers. This method is intended for evaluating new car interior trim components but can, in principle, also be applied to used car components. Target analytes include VOCs (conventionally defined as organic compounds in the volatility range of n-hexane to n-hexadecane) and volatile carbonyl compounds such as formaldehyde. The specified analytical procedure for VOCs is ISO 16000‑6 and for formaldehyde and some other light carbonyl compounds is ISO 16000‑3. ISO 12219-3:2012 provides third party test laboratories and manufacturing industry with a cost-effective approach for: a) monitoring and screening VOC emissions as part of routine quality control; b) monitoring product uniformity or conformity between formal certification tests; c) comparing emissions from products within a range (e.g. different colours or patterns); d) evaluating prototype, "low-emission" materials or products during development.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 15% off
ISO
ISO 12219-2:2012(Main)
Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method
SIST ISO 12219-2:2013

ISO 12219-2:2012 specifies the sampling bag test method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior parts into the air inside road vehicles. This method is intended for evaluating and screening new vehicle interior parts and materials such as seats, the instrument panel, ceiling materials and so on. The test method specified in ISO 12219-2:2012 specifies a procedure for screening of VOCs, formaldehyde and other carbonyl compounds using sampling bags. ISO 12219-2:2012 provides third party test laboratories and manufacturing industry with a cost-effective approach for: a) evaluating and screening prototype, "low-diffusion" materials or products during development; b) comparing diffusions from products within a range (e.g. different colours or patterns). ISO 12219-2:2012 specifies the design, construction, performance, evaluation, and use of sampling bags for testing vapour-phase organic emissions diffused from vehicle interior parts.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 12219-1:2021(Main)
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors
SIST ISO 12219-1:2023

This document specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of 23 °C - 25 °C with no air exchange; a second only for the measurement of formaldehyde at elevated temperatures (parking mode); and a third for VOCs and carbonyl compounds simulating driving after the vehicle has been parked in the sun starting at elevated temperatures (driving mode). For the simulation of the mean sun irradiation, a fixed irradiation in the whole vehicle test chamber is employed. The VOC method is valid for measurement of non-polar and slightly polar VOCs in a concentration range of sub-micrograms per cubic metre up to several milligrams per cubic metre. Using the principles specified in this method, some semi-volatile organic compounds (SVOC) can also be analysed. Compatible compounds are those which can be trapped and released from the Tenax TA®[1] sorbent tubes described in ISO 16000‑6, which includes VOCs ranging in volatility from n-C6 to n-C16. The sampling and analysis procedure for formaldehyde and other carbonyl compounds is performed by collecting air on to cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption. Formaldehyde and other carbonyl compounds can be determined in the approximate concentration range 1 µg/m3 to 1 mg/m3. The method is valid for passenger cars, as defined in ECE-TRANS-WP.29/1045. This document gives guidelines for: a) transport and storage of the test vehicles until the start of the test; b) conditioning for the surroundings of the test vehicle and the test vehicle itself as well as the whole vehicle test chamber; c) conditioning of the test vehicle prior to measurements; d) simulation of ambient air conditions (ambient mode); e) formaldehyde sampling at elevated temperatures (parking mode); f) simulation of driving after the test vehicle has been parked in the sun (driving mode). [1] Tenax TA® is the trade name of a product supplied by Buchem. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the product named. Equivalent products may be used if they can be shown to lead to the same results.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 15% off