ISO 20942:2019
(Main)Leather — Full chrome upper leather — Specification and test methods
Leather — Full chrome upper leather — Specification and test methods
This document specifies requirements, methods of test and methods of sampling for full chrome upper leather. This document is applicable to upper leather which is used in general purpose sports footwear, school footwear, casual footwear, men's town footwear, women's town footwear, cold weather footwear, fashion footwear, infants' footwear and indoor footwear.
Cuir — Cuir à dessus entièrement chromé — Spécifications et méthodes d’essai
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 20942
First edition
2019-05
Leather — Full chrome upper leather
— Specification and test methods
Cuir — Cuir à dessus entièrement chromé — Spécifications et
méthodes d’essai
Reference number
ISO 20942:2019(E)
©
ISO 2019
---------------------- Page: 1 ----------------------
ISO 20942:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 20942:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Characteristics . 3
4.1 Physical characteristics . 3
4.2 Chemical characteristics . 6
5 Sampling . 6
6 Packaging and marking . 6
6.1 Packaging . 6
6.2 Marking . 6
Bibliography . 7
© ISO 2019 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 20942:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 120, Leather, Subcommittee SC 2, Tanned
leather.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 20942:2019(E)
Introduction
Leather is widely used in the footwear industry. Although different tanning agents can be used to
produce leather, chromium III is still the most important agent in the tanning of leather for footwear.
This document specifies requirements for various types of full chrome upper leather which are used in
the footwear industry.
© ISO 2019 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 20942:2019(E)
Leather — Full chrome upper leather — Specification and
test methods
1 Scope
This document specifies requirements, methods of test and methods of sampling for full chrome upper
leather. This document is applicable to upper leather which is used in general purpose sports footwear,
school footwear, casual footwear, men’s town footwear, women’s town footwear, cold weather footwear,
fashion footwear, infants' footwear and indoor footwear.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location
ISO 2588, Leather — Sampling — Number of items for a gross sample
ISO 3376, Leather — Physical and mechanical tests — Determination of tensile strength and percentage
extension
ISO 3377-2, Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double
edge tear
ISO 3379, Leather — Determination of distension and strength of surface (Ball burst method)
ISO 4045, Leather — Chemical tests — Determination of pH and difference figure
ISO 4048, Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty
acid content
ISO 5398-1, Leather — Chemical determination of chromic oxide content — Part 1: Quantification by
titration
ISO 5402-1, Leather — Determination of flex resistance — Part 1: Flexometer method
ISO 11640, Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing
ISO 11642, Leather — Tests for colour fastness — Colour fastness to water
ISO 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.