Environmental management for concrete and concrete structures — Part 1: General principles

This document provides a framework and basic rules on environmental management related to concrete and concrete structures. This includes the assessment of the environmental impacts and methods of implementing environmental improvement based on the assessment. This document is used for the environmental consideration in activities related to the production of concrete constituents, the production, recycling and disposal of concrete, and the design, execution, use and demolition of concrete structures. It is applied for their entire lifecycles, respective stages of the lifecycles, or certain ranges of the lifecycles. This document is applicable to newly produced concrete and newly constructed concrete structures, and also existing concrete and concrete structures. This document applies to single concretes, concrete families, single concrete structures, and concrete structure complexes. For materials other than concrete, the related ISO standards are applied where available. In the case where no ISO standard is available, such materials are appropriately dealt with referring to this document and the normative references. This document covers global, regional and local environments. This document does not directly deal with the environmental impacts resulting from the operation of equipment installed in concrete structures. However, the special properties of concrete and concrete structures affecting the operational efficiency of such equipment are considered in this document. This document covers secondary effects of the production of concrete and execution of concrete structures. NOTE The secondary effects of the production of concrete include the future possibility of leaching of heavy metals from concrete or the absorption of heavy metals from the environment, the effect of waste treatments on the environment, etc. This document covers the economic and social effects of environmental consideration in the production of concrete and execution of concrete structures.

Management environnemental du béton et des structures en béton — Partie 1: Principes généraux

General Information

Status
Not Published
Current Stage
6000 - International Standard under publication
Completion Date
25-Nov-2023
Ref Project

Relations

Buy Standard

Draft
ISO/FDIS 13315-1 - Environmental management for concrete and concrete structures — Part 1: General principles Released:15. 09. 2023
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/FDIS 13315-1 - Environmental management for concrete and concrete structures — Part 1: General principles Released:15. 09. 2023
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13315-1
ISO/TC 71/SC 8
Environmental management for
Secretariat: JISC
concrete and concrete structures —
Voting begins on:
2023-09-29
Part 1:
Voting terminates on:
General principles
2023-11-24
Management environnemental du béton et des structures en béton —
Partie 1: Principes généraux
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13315-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 13315-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13315-1
ISO/TC 71/SC 8
Environmental management for
Secretariat: JISC
concrete and concrete structures —
Voting begins on:
Part 1:
Voting terminates on:
General principles
Management environnemental du béton et des structures en béton —
Partie 1: Principes généraux
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13315-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 13315-1:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General framework . 4
4.1 General . 4
4.2 Phases in the lifecycle . 5
4.3 Environmental impact categories . 5
4.4 Analysis . 6
4.4.1 General . 6
4.4.2 System boundary .
...

© ISO/FDIS 13315-1 – All rights reserved
ISO/FDIS 13315-1:2023(E)
ISO /TC 71/SC 8/WG 1
Secretariat: JISC
Date: 2023-09-13
Environmental management for concrete and concrete
structures —
Part 1:
General principleprinciples

Management environnemental du béton et des structures en béton —
Partie 1: Principes généraux
FDIS stage

Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

---------------------- Page: 1 ----------------------
ISO #####-#:####(X)

2 © ISO #### – All rights reserved

---------------------- Page: 2 ----------------------
© ISO/FDIS 13315-1 – All rights reserved
© ISO 2021
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/FDIS 13315-1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
iv © ISO/DIS 13315-1 2023 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/FDIS 13315-1:2023(E)
Contents
Foreword .vi i
Introduction . ix
Part 1: General principles . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General framework . 4
4.1 General . 4
4.2 Phases in the lifecycle . 5
4.3 Environmental impact categories . 5
4.4 Analysis . 6
4.4.1 General . 6
4.4.2 System boundary . 7
4.4.3 Inventory data . 7
4.4.4 Category indicators . 7
4.5 Design phase . 7
4.6 Production/execution phase .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.