Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 2: Slurry test for profiled surfaces

This document specifies a low-voltage test method for detecting and locating defects (pores, cracks or pop-offs) that occur in enamel coatings of corrugated and/or undulated profiles and that extend down to the metal base. The method is based on colour effects (optical method) and is applicable to the precise detection of defects and their exact position. It can be used for non-flat, more profiled shapes such as corrugated or undulated surfaces. NOTE The low-voltage test is a non-destructive test for detecting defects extending down to the metal base and is, therefore, completely different in comparison to the high-voltage test in accordance with ISO 2746.

Émaux vitrifiés — Essai à basse tension pour la détection et la localisation des défauts — Partie 2: Essai à la barbotine pour surfaces profilées

Le présent document spécifie une méthode d'essai à basse tension permettant de détecter et de localiser les défauts (pores, fissures ou éclats) qui apparaissent sur les revêtements émaillés de profilés ondulés et/ou présentant des sinuosités, et qui s'étendent jusqu'au métal de base. Cette méthode est basée sur des effets de couleur (méthode optique) et elle peut être appliquée pour détecter les défauts avec précision et les localiser avec exactitude. Elle peut s'appliquer aux formes non planes très profilées telles que les surfaces ondulées ou présentant des sinuosités. NOTE L'essai à basse tension est un essai non destructif qui permet de détecter les défauts s'étendant jusqu'au métal de base, et qui, par conséquent, diffère complètement de l'essai sous haute tension conforme à l'ISO 2746.

General Information

Status
Published
Publication Date
19-Mar-2019
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project

Buy Standard

Standard
ISO 8289-2:2019 - Vitreous and porcelain enamels -- Low-voltage test for detecting and locating defects
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8289-2:2019 - Émaux vitrifiés -- Essai a basse tension pour la détection et la localisation des défauts
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8289-2
First edition
2019-03
Vitreous and porcelain enamels —
Low-voltage test for detecting and
locating defects —
Part 2:
Slurry test for profiled surfaces
Émaux vitrifiés — Essai à basse tension pour la détection et la
localisation des défauts —
Partie 2: Essai à la barbotine pour surfaces profilées
Reference number
ISO 8289-2:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 8289-2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8289-2:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Test medium . 1
5.1 General . 1
5.2 Formulation . 2
6 Apparatus . 2
6.1 Power source . 2
6.2 Test electrode . 2
7 Test specimens. 2
8 Procedure. 3
9 Evaluation . 3
10 Test report . 3
Bibliography . 4
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8289-2:2019(E)

Foreword
ISO (the International Organization fo
...

NORME ISO
INTERNATIONALE 8289-2
Première édition
2019-03
Émaux vitrifiés — Essai à basse
tension pour la détection et la
localisation des défauts —
Partie 2:
Essai à la barbotine pour surfaces
profilées
Vitreous and porcelain enamels — Low-voltage test for detecting and
locating defects —
Part 2: Slurry test for profiled surfaces
Numéro de référence
ISO 8289-2:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 8289-2:2019(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8289-2:2019(F)

Sommaire Page
Avant-propos .iv
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Milieu d'essai . 2
5.1 Généralités . 2
5.2 Formule . 2
6 Appareillage . 2
6.1 Source d’alimentation . 2
6.2 Électrode d'essai . 2
7 Éprouvettes . 3
8 Mode opératoire. 3
9 Évaluation . 3
10 Rapport d'essai . 4
Bibliographie . 5
© ISO 2019 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 8289-2:2019(F)

Avant-propos
L'ISO (Organisation internationale de normalisation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.